How to enhance the insulation of the house?

Winter has arrived, and enhancing the insulation inside the house is the most important thing.

First of all, the first point, of course, is to turn on the air conditioner, adjust the air conditioner to about 26 degrees, try not to be higher than this temperature, otherwise the room will be particularly stuffy, conditional families, you can install a ** air conditioner in the living room, in this way, the whole house will be particularly warm, and, as long as the doors and windows are closed, the thermal insulation effect is still quite strong.

And then the second point, the western part of our country is particularly cold in winter, many families have installed electric heaters on the ground, as long as it is turned on, the room will be particularly warm after a while, no different from summer, and, as long as it is not too breathable, the thermal insulation effect is relatively good, and the heating is not easy to dissipate to the outside.

Another point is that rural families can burn charcoal to warm up the house, put the burned charcoal in an iron basin, and put it in the front of the house, soon, the house will be very warm, this does not need to cost, basically every household in the countryside will use this way to heat.

There are many ways to enhance the thermal insulation effect of the house, but it also depends on the situation of each family, and it is good to choose a suitable method.

Friends who live in the north can choose to install radiators in the house, so that the house will be much warmer when heating.

Adding a radiator to your house is the easiest and most straightforward way to do it. But if the heating itself is not hot enough, these radiators are not of much use.

Therefore, it is best to pay for the exterior wall of the building to keep warm in autumn, so that the walls of the house are thicker and the house will be warmer. This way, in the season when there is no heating, it will not be too cold in the house.

You must know that the walls are too thin and the house is not warm, even if you add more radiators, the house will not be much warmer, just like a leaky tank can't hold water.

There are also doors and windows in the home that can be transformed into two-layer glass, so that the heating effect of the house will be better. In addition, in winter, you can replace thicker curtains, which can also add a lot of temperature to the house.

There are many measures to keep warm in winter, and if your home is cold, then you must act quickly, after all, the winter in the north is still very cold. Don't regret when you're shivering in winter, why didn't you act quickly.

In addition to the temperature of the weather and whether the heating is good, it is very important whether the warmth of the room is good.

When building a house, a thick insulation board will be installed on the wall, which is actually thick foam, which will block the cold air from penetrating the wall and make the house warmer.

If your house is not insulated, you can put an insulation board in the room, but because the insulation board has thickness, it will take up the area of the house.

The premise of a house with good thermal insulation is that the house is well sealed, and the house will not be cold if it is impermeable, so the choice of windows is very important, and the windows with good sealing are plastic steel windows.

But if the window is not well sealed, it doesn't matter, you can use transparent glue to glue the window seam or use cotton to plug the seam on it. In the northeast, there will be heating in the house, but sometimes you will find that the temperature of the heating cannot rise, in fact, because there is too much air in the heating, so it is necessary to properly release the air inside, so that the heating can play the greatest role.

First, the design of the tile house is ridged, which can insulate the house.

2. (1) In order to enhance the effect, the simple way is to ensure the thermal insulation and thermal insulation of the upper and lower layers, and it is best to completely isolate the connection of each part. The hollow part of the ridge is filled with thermal insulation material, and attention is paid to fire prevention.

2) Most tiled houses pursue wide glass windows, which obviously leads to heat loss, so double glazing is worth considering.

3) Don't blindly pursue the height of the house, it is okay in summer and it looks cool, but in winter due to the rise of heat, the indoor roof temperature is high and the temperature under the feet is low, wasting heat and not suitable for living.

4) The house is waterproof and moisture-proof, that is, the heat insulation of the ground is also very important, few people consider the heat dissipation of the ground, but if the heat insulation of the ground is not done well, the ground will always be in a state of cool air upward, and no matter how good the upper insulation is, it will have no effect. Even if you install underfloor heating, you must first do a good job of insulating the floor.

5) The insulation of the wall, this is the same as the construction of the building, and the insulation material can be applied directly.

6) Heating, regardless of the heating method, try to lower the position of the heater, which is more suitable for people's temperature feeling.

If you change it, add a thermal insulation board.,That thing was about 70 three years ago.,I don't know now.,And after adding it, you have to repaint it.。

First of all, you live on several floors, one floor can also be done, and then up, it will make the outer wall of the part where you live protrude, affecting the overall appearance, I don't know if the property allows?

The method is as follows: use polymer mortar to bond 7cm or 10cm thick benzene board (5cm thick extruded board can also be used), leave about 5mm gap in the benzene board, and fill the joint with polyurethane foam. After leveling, 8 plastic nails per square are anchored, and then the vitrified fiber mesh is bonded with polymer mortar, and one net or two nets (generally one layer with two nets) you choose, but you can not expose the net, and finally scrape the putty on the paint.

2 ways to keep warm.

1. Outdoor insulation, which is more difficult, is done during civil construction.

2. Indoor insulation. 1. Window angle: Replace with insulating glass, which is insulated.

2. Wall angle: Brush the cement wall with thermal insulation paint (sold in thermal insulation and waterproof stores), and do wall modeling after brushing, such as wainscoting and gypsum board modeling. Moldings are installed inside with insulating cotton or this insulating foam.

There are many insulation materials, and the kind I said is more economical, beautiful and effective.

1. Do not destroy the internal insulation layer of the original wall during decoration.

2 It is best not to tear down the wall between the living room and the balcony, because this wall is an external wall, and it is not conducive to thermal insulation. If the balcony is connected to the living room, it should be on the wall and top surface of the balcony.

Retrofitting of insulation.

3. Residents living on the top floor can set insulation materials on the gypsum board of the paper surface when the ceiling is suspended to improve the thermal insulation and thermal insulation performance of the room.

4. Choose energy-saving doors and windows that meet the standards of the region, so that they are airtight, watertight, soundproof, and safe.

The main physical indicators such as temperature and heat insulation meet the specified requirements.

5. Purchase the door cavity filled with fireproof insulation materials such as glass wool or mineral wool, and install an anti-theft door with good sealing effect.

6. If double-glazed windows are installed, the outer windows can be insulating glass broken bridge metal windows, and the inner windows can be heat-insulated double-glazed windows. In this way, on the one hand, the thermal insulation can be strengthened, and the power consumption of air conditioning can be saved by about 5 (the ratio of the window wall is different); On the other hand, it can better insulate the sound and prevent noise pollution.

7. Try to choose curtains with thick cloth and good thermal insulation.

8 Add sealing strips to doors and windows.

9 Do not remove the radiator at will. The number of radiators used in each room is designed according to the area of the room, and changing the heating at will is not conducive to the regulation of indoor temperature.

10 When laying wooden floors, insulation materials can be placed between the grilles under the floor, such as:

Mineral (rock) wool board, flame retardant foam, etc.

The key to the heating system of rural self-built houses (bungalows), :

The first step is to do a good job of insulation, if you don't do insulation, it is futile to do any heating system!

1.Choose a leeward and sunny terrain to build a house, 2Doors and windows are required to have a certain thermal insulation effect, 3It is best to use lightweight hollow bricks or similar materials for the wall, and add insulation materials 4 if possibleThe building materials are energy-saving and environmentally friendly.

Step 2: Choose the appropriate heating method of rural self-built houses (bungalows) The heating methods of rural self-built houses (bungalows) are: coal-fired heating, earth heating, orange gas heating, solar heating, electric heating, air conditioning, electric floor heating, etc.

1. External wall insulation technology and advantages and disadvantages: The construction speed of external wall insulation is fast, the operation is convenient and flexible, and the construction progress can be guaranteed. The application time of internal insulation is long, the technology is mature, and the construction technology and inspection standards are relatively perfect.

At present, the main construction methods are reinforced gypsum composite polystyrene insulation board, polymer mortar composite polystyrene insulation board, reinforced cement composite polystyrene insulation board, interior wall polystyrene board plastered plaster and plastered polystyrene particle insulation slurry plus anti-crack mortar pressed into the grid cloth. Its disadvantage is: the insulation of the external wall will occupy more usable area"Thermal bridges"The problem is not easy to solve, it is easy to cause cracking, it will also affect the construction speed, affect the secondary decoration of the family, and the internal wall hanging and fixed objects are also easy to destroy the internal insulation structure.

2. External wall insulation technology and advantages and disadvantages: External thermal insulation is a kind of building insulation and energy-saving technology that is currently vigorously promoted. Compared with the internal insulation, the technology is reasonable, and it has its obvious advantages, using the same specifications, the same size and performance of the insulation materials, the effect of the external insulation is better than the internal insulation.

External thermal insulation technology is not only suitable for new structural engineering, but also for the renovation of old buildings, with a wide range and high technical content; The external insulation package is on the outside of the main structure, which can protect the main structure and prolong the life of the building; Effectively reduce the thermal bridge of the building structure and increase the effective space of the building; At the same time, condensation is eliminated and living comfort is improved. At present, the more mature external wall insulation technology mainly includes the following:1:

External external thermal insulation, external thermal insulation materials include rock (mineral) wool, glass wool felt, polystyrene foam board (referred to as polystyrene board, EPS, XPS), ceramsite concrete composite polystyrene imitation stone decorative insulation board, steel wire mesh sandwich wall panel, etc. Among them, polystyrene board has been widely used in exterior wall insulation and external hanging technology all over the world because of its excellent physical properties and low cost. 2:

The polystyrene board and the wall are poured and formed at one time, and the technology is to build the polystyrene board into the building template in the concrete frame-shear system, and then pour the concrete on the outside of the wall to be poured, and the concrete and the polystyrene board are poured and molded into a composite wall at one time. This technology solves the main problem of external thermal insulation, and its advantages are obvious. Because the main body of the exterior wall and the insulation layer survive at one time, the work efficiency is improved, the construction period is greatly shortened, and the safety of the construction personnel is guaranteed.

Moreover, during winter construction, polystyrene board plays the role of thermal insulation, which can reduce the perimeter enclosure insulation measures. However, when pouring concrete, it is necessary to pay attention to uniform and continuous pouring, otherwise due to the influence of concrete side pressure, the polystyrene dust board will be deformed and staggered after the mold is removed, which will affect the subsequent construction.

In general, cold air enters the room through the edges of doors and windows, and unopened doors and windows should be covered with paper or cloth. The glass on the doors and windows leaks the most heat loss, and the doors and windows that cannot be exposed to sunlight are best covered with curtains. Direct sunlight can warm the room, so try to let the sunlight into the room as unobstructed.

The double-layer door has a strong ability to keep out the cold, which can reduce the heat loss rate in the house by 50 and the cold air intrusion by 25.