What s the deal with the gas stove with one light and one without it?

It may be a malfunction of the receiver or igniter, or it may be caused by insufficient air intake of the gas stove.

It could be a faulty ignition needle.

The location of the ignition needle, the high-voltage discharge needle insulates the magnet and the high-voltage wire.

Oil and electricity leakage may cause both burners to not be turned on at the same time.

ProbablyThe air intake of the gas stove is insufficient

1. If the stove is embedded in the cabinet, and the cabinet has no holes, or the air circulation is not enough, it will cause the gas to mix with the air for the first time and the oxygen is not enough to burn and extinguish.

2. The general cooker adopts the mode of full air intake, and the mode of up and down air intake not only has the firepower of the lower air intake, but also has the characteristics of full combustion of the upper air intake.

3. If the air in the cabinet is insufficient, it will not be able to burn. It is common for the stove to burn for a few minutes and then turn off, one side is normal, and both sides are used to turn off. The stove can be used normally when it comes out of the cupboard.

When encountering this kind of problem, it is possible that one side of the ignition needle is dirty, or the ignition needle is deviated, which will cause one side to not catch fire. Solution: We can clean the burner and the area around the ignition needle ,..

If you find that one side cannot be ignited, no sparks can be seen, and no clicking sound can be heard, it means that the thread on one side is not in good contact or has fallen off. Solution: It is best to ask a professional to come to your door.

If it still can't be opened, you should consider that the micro switch may be damaged, or the solenoid valve is broken. Solution: You can find a professional to replace it.

There are many reasons why the gas stove can be lit while not being lit, such as the ignition needle of the gas stove that cannot be turned on is dirty, or the ignition needle is off. At this time, you can clean the ignition needle and readjust the position of the ignition needle before trying to open it. Another example is that the stove switch of the gas stove is broken, and it needs to be replaced.

If the above methods can not solve the problem, it may be a tempering failure, for example, its regulator has a nozzle, if the nozzle is blocked, you need to disassemble the internal machine, and a professional will come to check and repair.

Precautions for the use of gas stoves

1. In the use of the stove, if it is found that the fire is out, immediately turn off the switch to open the doors and windows for ventilation, when there is no gas smell, find out the reason for the flameout, and open the doors and windows for ventilation, when there is no gas smell, find out the reason for the flameout, and properly deal with it before re-igniting.

2. Before stopping the use of gas or going to bed, check whether the gas appliance switches are all turned off. It is safer to turn off the main valve on the gas meter, open the kitchen window, and close the kitchen door to the bedroom.

3. If the hose connection method is used between the gas stove and the pipeline, it is necessary to check whether the hose is damaged and aged and whether there is air leakage.

The above content refers to Encyclopedia - Gas Stove.

Summary. 1. Reason: The gas stove does not open the gas valve.

Solution: Sometimes this situation will also be encountered, generally encountered in this situation of the elderly forgot to open the gas valve, want to open the gas stove but can not catch fire, this solution is very simple, as long as the gas is turned on, that is, open the gas valve to naturally turn on the gas can be ignited normally.

2. Reason: Dirt from the fire extinguishing hole.

Solution: When there are a lot of dirty things in the fire extinguishing hole of the gas stove, especially for friends who often cook and do not pay attention to cleaning the gas stove, the gas stove at home is dirty, and it is said that the gas stove in your home suddenly can't catch fire, you can try to clean the fire extinguishing hole of the gas stove, because the fire extinguishing hole is blocked, it will hinder the burner mixed gas to leave a natural fire.

3. Reason: The nozzle of the gas stove is blocked.

Solution: The nozzle of the gas stove is the fire of the spray fire, if the nozzle is blocked, affecting the nozzle to ignite the gas, this naturally can not catch fire, the light is a little bit of the sound of the fire needle, but it just can't catch fire, you are the nozzle is blocked, you have to clean the nozzle.

One of the gas stoves can catch fire, and the other can't.

1. Reason: The gas stove does not open the gas valve solution: sometimes this situation will also be encountered, generally the elderly who encounter this situation forget to open the gas valve, want to open the gas stove but can not catch fire, this solution is very simple, as long as the gas is connected, that is, open the gas valve and naturally turn on the gas can be ignited normally.

2. Reason: Dirt solution for fire extinguishing holes: When the fire extinguishing hole of the gas stove has a lot of dirty things, especially for friends who often cook and do not pay attention to cleaning the gas stove, the gas stove at home is dirty, and they say that why their gas stove suddenly can't catch fire, you can try to clean the fire extinguishing hole of the gas stove, because the fire extinguishing hole is blocked, it will hinder the burner gas mixture to leave a natural fire.

3. Reason: Gas stove nozzle blockage solution: The nozzle of the gas stove is the fire of the spray fire, if the nozzle is blocked, affecting the nozzle to ignite the gas, this naturally can not catch fire, the light is a fire needle click, but it just can't catch fire, you are the nozzle is blocked, you have to clean the nozzle.

What's going on without a dada.

Whether its fire separator is malfunctioning, and the fire separator must be aligned with the bayonet, if it is displaced, it will also cause it to fail to fire when firing.

1. It may be that the ignition needle on one side is dirty, or it may be that the ignition needle has deviated, which will cause one side to not catch fire. At this time, we can clean the burner and the area around the ignition needle, and at the same time pay attention to readjusting the position of the ignition needle.

2. If we find that one side cannot be ignited, but we can't see the spark, and we don't hear the sound of dada, it means that the line on one side is in poor contact or has fallen off. It is best to ask a professional to come to the door to adjust, and the position of the ignition needle should be about 5 mm away from the fire cover, and it should be aimed at the fire hole.

3. It may be that the micro switch is damaged, or the solenoid valve is broken, so you should find a professional.

4. There is no gas. Usually everyone will have a bottom about this gas situation, but some people may be more careless, or they may be busy with homework and often forget, so when the stove does not catch fire, the first thing to check is whether there is still gas. Workaround:

If the bottled gas is out of gas, it must be refilled; If it is piped gas, make sure that the valve switch is turned on.

5. The battery is dead. This is a question that is usually encountered briefly, and it is also a question that everyone attaches more importance to, and if you find that the light is not on fire and there is no sound of clicking, you must check whether the battery is charged.

6. Poor circuit touch. This is a very simple and negligent question, but it is often encountered in many old users, mainly to check whether the positive and negative poles of the battery box are rusty, and whether the line is not badly touched.

Causes and solutions: 1. Reason: The gas stove does not open the gas valve.

Solution: Sometimes this situation will also be encountered, generally encountered in this situation of the elderly forgot to open the gas valve, want to open the gas stove but can not catch fire, this solution is very simple, as long as the gas is turned on, that is, open the gas valve to naturally turn on the gas can be ignited normally. Other causes and solutions are as follows:

2. Reason: Dirt from the fire extinguishing hole.

Solution: When the fire extinguishing hole of the gas stove has a lot of dirty things, especially for friends who often cook and don't pay attention to cleaning the gas stove, the gas stove at home is dirty and can't be seen, and you can try to clean the fire extinguishing hole of the gas stove, because the fire extinguishing hole is blocked, it will hinder the burner gas mixture to leave a natural fire.

3. Reason: The nozzle of the gas stove is blocked.

Solution Cracking: The nozzle of the gas stove is the fire of the spray fire, if the mouth of the spray is blocked, affecting the nozzle to ignite the gas, this naturally can not catch fire, the light is a little fire needle clattering sound, but it just can't catch fire, you are the nozzle is blocked, you have to clean the nozzle.

4. Reason: The hose is folded.

Solution: Generally, the gas pipe of the gas stove is of the hose type, and then it is folded very seriously, resulting in the gas cannot flow to the gas stove normally, and the natural gas stove cannot be ignited, and there is no normal gas input, and there must be a problem with the ignition device.

5. Reason: There is no clattering sound of the ignition needle.

Solution: If the ignition needle does not have a clattering sound, it is likely that the ignition needle is damaged, the battery under the ignition needle ignition is out of power, and the ignition needle cannot be ignited, this is the most common reason why the gas stove cannot be ignited, under normal circumstances, the battery needs to be replaced, especially some gas stove batteries that have been used for a long time are out of power and naturally cannot ignite.

Causes and solutions: 1. Reason: The gas stove does not open the gas valve Solution:

Sometimes this situation will also be encountered, generally encountered in this situation of the elderly forgot to open the gas valve, want to open the gas stove but can not catch fire, this solution is very simple, as long as the gas is turned on, that is, open the gas valve to naturally turn on the gas can be ignited normally. Other causes and solutions are as follows: 2. Causes:

Fire extinguishing hole dirt solution: When the fire extinguishing hole of the gas stove has a lot of dirty things, especially for friends who often cook and do not pay attention to cleaning the gas stove, the gas stove at home is dirty and can not be seen, and say that why the gas stove in your home suddenly can't catch fire, you can try to clean the fire extinguishing hole of the gas stove, because the fire extinguishing hole is blocked, it will hinder the burner gas mixture to leave a natural fire. 3. Reason:

Gas stove nozzle blockage solution: The nozzle of the gas stove is the fire of the spray fire, if the nozzle is blocked, affecting the nozzle to ignite the gas, this naturally can not catch fire, the light is a little fire needle clattering sound, but it just can't catch fire, you are the nozzle is blocked, you have to clean the nozzle. 4. Potato pants are quiet:

Hose folding solution: Generally, the gas pipe of the gas stove is of the hose type, and then it is folded very seriously, resulting in the gas cannot be circulated to the gas stove normally, and the natural gas stove cannot be ignited, and there is no normal gas input, and there must be a problem with the ignition device. 5. Reason:

Ignition needle does not have a sound solution: If the ignition needle does not have a clicking sound, it is likely that the ignition needle is damaged, the battery under the ignition needle ignition is out of power, and the ignition needle cannot be ignited, this is the most common reason why the gas stove cannot be ignited, under normal circumstances, the battery needs to be replaced, especially some gas stove batteries that have been used for a long time are out of power and naturally cannot ignite.

The six main reasons are: First, the ignition needle is dirty, which causes the ignition to not catch fire. Second, the position of the fire cover is incorrect, and the ignition is not aimed at the fire hole.

Third, the fire cover fire hole is blocked. Fourth, the wire of the igniter is not in good contact or falls off. Fifth, the micro switch of the gas stove is faulty.

Sixth, the solenoid valve of the gas stove is faulty. These are common faults of gas stoves.

The solution to the gas stove that can catch fire and not catch fire:

1. There are stains on the ignition needle of the gas stove.

When the gas stove can be ignited while not igniting, it may be because the ignition needle of the gas stove is covered with stains and rust on the side that cannot ignite.

Solution: Use sandpaper or towels to clean the stains and rust.

2. The inner fire cover is not placed in place.

There is an electric spark on the side of the gas stove that cannot ignite and the sound of gas release can be heard, because the inner fire cover is placed obliquely and is not in place, so the ignition is not aimed at the fire hole and cannot catch fire.

Solution: Readjust the position of the inner fire cover so that the fire cover hole is aligned with the ignition needle.

3. The hole of the inner fire cover is blocked by dirt.

The side of the gas stove that cannot catch fire is blocked by dirt, and the overflowing phenomenon or incomplete cleaning when using the gas stove will cause the inner fire cover to be blocked, and the flame cannot come out of the fire hole, so it cannot catch fire.

Solution: You can clean the hole of the fire cover with the help of a toothpick and a thin wire.

4. The ignition disturbs the connecting line and falls off.

If one side of the ignition is normal, and the other side of the ignition cannot see the spark, but you can hear the "click" sound, it is possible that the wire of the igniter is not in good contact or has fallen off, and the detached wire head needs to be reconnected.

5. Micro switch failure.

There is no ignition sound on the side of the gas stove that does not catch fire, the situation is that the micro switch of the gas stove is faulty, and it is recommended to contact the maintenance personnel to replace it with a new micro switch.

6. Solenoid valve failure.

If it still can't be done, you need to consider that the solenoid valve may be damaged, and it is recommended to contact the maintenance personnel to replace it.

1. The lever of the piezoelectric igniter is damaged or deviated; The spring that supported the paddle broke. Solution: Replace two accessories, up to 1 yuan. However, there are very few technicians who can repair or are willing to repair this area.

2. If the main switch of the air source is not opened, turn on the main switch of the air source; If the battery is insufficient, replace the battery; There is a lot of ignition needle oil scale, clean the ignition needle oil scale; If the ignition needle is not in proper position, adjust the distance between the ignition needle and the fire cover by 4-6mm, and align it with the fire hole; Micro switch bad professional replacement; There is no gas or the pressure reducing valve is faulty, resulting in low air pressure.

Solution: Since the electronic ignition is composed of piezoelectric ceramics and metals, the food that is usually burned should not be spilled on the stove, and the electrode part should be kept clean. The situation of blocking the burner should be cleaned up in time.

When ignition is difficult, it should be checked whether the distance between the electrode and the stove is too large, whether the ignition hole is unblocked, whether the piezoelectric ceramics fail (fire is weak), and whether the metal components fall off. Otherwise, you should report to your office for repair in time.

3. It's not the problem of the battery, nor the calcium carbide, then the problem is in the stove. Solution: Ask a maintenance worker to come to the door, and after inspection, no parts were replaced, but the two stoves were all disassembled, which is the problem of the stove.

When cooking, there are often slags or overflowing soup accumulation on the stove, which causes poor contact, so it cannot catch fire. After washing, the stove worked very well.