Why does the Apple 6S keep getting call alerts?

This is because the phone has turned on the voice reminder function for incoming calls, and you can turn it off.

iphone 6s

First, click "Settings" on the desktop of your phone.

2. After entering the settings interface, drop down the menu and select the "**" option.

3. After entering the ** interface, turn on the "voice prompt when calling" to enter.

Fourth, finally check the "never" item.

Signal problem, if the signal is too weak, you may not be able to receive ** but call reminders.

The mobile phone is set up with secretarial services, and all incoming calls are converted into SMS reminders.

If there is a problem with the phone itself, you can only go to Apple's after-sales office to maintain the motherboard and hardware.

The main thing is that these three possibilities can be solved by checking them all.

The investigation method is as follows:

You can solve the problem by turning off the phone first, and then use the card pin to take out the small card in the card slot and put it in, and then restart the phone in another place.

Please click "Settings" on the home screen first

Go to an Apple repair shop to check and help you see if there is any problem with the motherboard and hardware, and the clerk will help you solve it.

Turn off the phone first, and then use the card pin to take out the small card in the card slot before putting it in.

Then restart the phone in a different place, if this is still the case after booting; Please first tap "Settings" on the home screen, and then turn "Carrier" to automatic mode.

If it has nothing to do with **, it is a problem with the mobile phone itself; You can only go to Apple's after-sales office to maintain the motherboard and hardware.

Method steps.

2. After entering the page, click Settings in the upper right corner.

3. You can see that there is a floating window prompt for coming and going, and you can choose to close or open it. After it is closed, there is no longer a reminder of the floating window of the coming and going calls.

1. This does not need to be set, because you only need to turn on the function of waiting for incoming calls, and now it is turned on by default.

2. On September 10, 2015, Beijing time, Apple released the iPhone 6S. The iPhone 6S comes in gold, silver, space gray, and rose gold. The screen is made of high-strength ION-X glass, the processor is Apple A9 processor, the CPU performance is 70% higher than that of A8, the graphics performance is increased by 90%, the rear camera is 12 million pixels, and the front camera is 5 million pixels.

The camera focuses more accurately, and the CMOS uses "deep slot isolation" technology to reduce noise, and supports 4K** recording. In terms of data connection, it supports 23 frequency bands of LTE network, and 2 times the speed of wifi connection, which needs to be turned on the call waiting function, the specific setting method of slipping and swimming: setting**, select call waiting in the menu, find the switch open, after turning on the function, you will be notified when you call** call in.

1. This does not need to be set, because the noisy code only needs to be turned on to wait for the call to wait for this function, and now it is turned on by default.

2. On September 10, 2015, Beijing time, Apple Inc. released the iPhone 6S in gold, silver, space gray, and rose gold. The screen is made of high-strength ION-X glass, the processor Changna uses the Apple A9 processor, the CPU performance is 70% higher than the A8, the graphics performance is increased by 90%, the rear camera is 12 million pixels, and the front camera is 5 million pixels. The camera focuses more accurately, and the CMOS uses "deep slot isolation" technology to reduce noise, and supports 4K** recording.

In terms of data connection, it supports 23 frequency bands of LTE network, and 2 times the speed of wifi connection, which needs to be turned on call waiting function, specific setting method: touch the setting**, select call waiting in the menu, find the switch open, after turning on the function, you will be notified if you have **call in the call.

Method.

1. Use SMS to send instead.

2. Sometimes when the mobile network is not good outside, or the wireless network is not good, there will be a situation where iMessage cannot be sent. At this point we can press and hold our finger on the text message being sent, and then select the option "Send with SMS Service" in the tool menu. In this case, the text message that was originally sent via iMessage will be sent instead of the normal text message.

Method. 2. Reset network settings.

If you find it inconvenient to do something like the one above, you can try resetting your iPhone's network settings. Find the "Settings" icon on your iPhone's home screen, tap to open it, as shown in the image:

5. Finally, try sending an iMessage.

Method. 3. Turn off and start again.

If the second method still can't solve the problem that iMessage can't be sent, and others can send it normally, then it may be a temporary failure of the mobile phone system. We can turn off and on again to let the system re-initialize all functions and let the phone return to normal.

1. Then slide the slider to power off, and then press the power button to restart your iPhone.

2. Wait for the iPhone to boot up, and then try to send text messages with iMessage again, and it should work normally.

iMessage isn't it just a free thing to send text messages between iPhones and iPhones, why should you go with them?

1. Open Settings on your phone.

2. Find "Notifications" and turn it on.

3. Open SMS and set it up.

4. Scroll to the bottom to open the Repeat Reminder option.

5. Select the number of times you want to repeat the reminder.

Caller ID display We can also call it caller ID, this display function is mainly divided into two states, one is the on-hook state, the other is the off-hook state. In modern life, if we want to contact relatives and friends, the most convenient way is to dial**, when you call someone**, if others do not store your number, there may be an unknown number display.

What's going on with the caller ID unknown number.

The common reason is that if the caller ID function is not activated, an unknown number will be displayed when the call comes. Another reason is that if you have turned on the display function, and the display still shows an unknown number, then the other party is likely to call you through unconventional channels such as through the network.

1. Display unknown number, which may have been the case in previous years, mainly because some people have not turned on the caller ID, so it will be like this, but this is a normal situation, and this situation almost does not exist now.

2. In fact, if you want your phone to display an unknown number, it's very simple, if you want to display your own number, you can show your own, and if you want to display an unknown number, you can also achieve it. How to achieve this effect, generally, as long as the mobile phone frequency band is not within the scope of operation of China Telecom, Mobile, Unicom or other international mobile phone operators, the location number is displayed.

3. At present, all types of mobile phone calling software are not in the operator's mobile phone frequency band, so as long as the mobile phone is installed with the call software, the default dial ** will display the unknown number.

My phone keeps showing that unknown has been remarked, and his name is still written unknown.