How to make styrofoam in one day, how to make styrofoam once is successful

Styrofoam is a very common glue that is versatile and can be used to attach a variety of materials. There are a few things to pay attention to in order to do a good job of styrofoam for the day.

Temperature is an important factor that affects the effectiveness of styrofoam. As a rule of thumb, the suitable application temperature of styrofoam is generally between 18°C and 25°C. Temperatures that are too low may cause the foaming tape to be difficult to bond, while temperatures that are too high may make the glue flow more difficult to control.

Therefore, before starting to do styrofoam work, we need to make sure that the temperature of the construction environment is moderate.

When using, you need to pay attention to the stirring and dilution of styrofoam. Before construction, we should stir the styrofoam well to avoid sedimentation and delamination. In cases where dilution is required, we can dilute it by adding the right amount of water to the styrofoam according to specific needs.

However, it should be noted that it should not be over-diluted, so as not to affect the bonding effect.

Choosing the right coating tool is also key. Common coating tools are brushes, rollers, etc. For different materials, we can choose different tools for coating.

When applying, it is necessary to ensure that the coating is evenly applied to avoid missing or overlapping. It is necessary to choose the right tool size according to the brand and specifications of the styrofoam to get the best coating effect.

Pre-construction surface treatment is also one of the keys. To remember that foam adhesive has a good bonding effect, it is necessary to clean the bonding surface before construction and ensure that there are no impurities such as oil and dust. Surfaces can be wiped with detergent or alcohol to ensure that the glue adheres to the material adequately.

After styrofoam application, you need to wait enough time for it to dry completely. During the waiting process, avoid touching or applying pressure to the glue surface to avoid affecting the adhesive effect. Depending on the brand and specification of styrofoam, the drying time may vary, taking about a few hours to several days.

To do a good job in a day's styrofoam, we need to pay attention to temperature control, stirring and dilution, choosing the right coating tool, surface preparation before application, and drying time. Hope the above advice is helpful to you. If you have any other questions, please feel free to ask me.

In daily life, styrofoam is a kind of entertainment and entertainment products, which has the characteristics of softness and foaming. Not only that, the main raw material of styrofoam is glue, which is not toxic and will not cause harm to the body. Therefore, a lot of small children love to play with this.

How to make styrofoam How to make your own styrofoam.

How to make styrofoam.

First of all, prepare raw materials such as Chenguang glue (Deli glue), water, containers, shaving foam, borax water, glycerin, etc. Pour Deli glue and a small amount of glycerin into the container. It should be noted that it is best not to add too much glycerin.

Next, add shaving foam to the container and stir with water. Generally speaking, the best ratio of water to glue is 1:2, and water should not be added too much. Finally, add the borax water in small amounts and stirring as you go. So that the styrofoam is ready.

How to make styrofoam How to make your own styrofoam.

Borax water refers to the solution of borax after it is dissolved in water. Pour an appropriate amount of borax into clean water and stir well, you can get borax water. Borax, on the other hand, is a white powder containing colorless crystals that is easily soluble in water.

Borax has a wide range of uses and can be used as a cleaner, cosmetics, insecticide, etc.

If borax water is not available, it can also be made with clay, glue, starch, coloring and shaving foam. Put the ultra-light clay in a container, add a small amount of water to dissolve, and then add an appropriate amount of glue.

Then add the color pigment, a small amount of starch and a large amount of shaving foam and stir well, so that 1. First take a clean container with a lid (it is recommended to use a disposable box); Squeeze some of the dish soap into the container.

2. Squeeze some more toothpaste into it and add a little water.

3. Close the lid of the container and shake it vigorously until it bubbles.

4. Add a small half box of glue, squeeze in some hand cream, and mix well with a spoon. Because the hand cream is pink, we don't need to add any extra color here.

5. Add laundry detergent and mix well with a spoon until the styrofoam is formed.

6. The homemade styrofoam is ready, soft and smooth, and it can also make a crackling sound. It's starting to bubble. In other words, the styrofoam is finished.

Add white glue, the amount of white glue 90% determines the size of the finished product after that, and it cannot be poured more or less.

Add an appropriate amount of aloe vera gel, which replaces the traditional shower gel and hand soap.

Styrofoam formula - high temperature resistance, aging resistance, stable performance. Ad.

Add an appropriate amount of borax water, add too much, it will make the final product too hard, too little will make the mud too thin, add a small amount and more, and add borax water little by little.

How to choose high-quality fish maw and fish maw tells you a few to identify fish maw. Ad.

Summary. Usually between 10 minutes and 1 hour. Mainly according to the construction environment, if the construction environment temperature is high and ventilated in summer, the foam glue can dry in only 10 minutes.

On the other hand, if the construction environment temperature is low in winter, it may take 1 hour for the foam glue to dry.

Usually between 10 minutes and 1 hour. Mainly according to the construction environment, if in summer, the temperature of the construction ring excavation is high and the ventilation is not left, the foam glue only takes 10 minutes to dry. On the other hand, if the temperature of the construction environment is low in winter, the foam glue may need 1 small vertical to dry.

So why does styrofoam always not form.

The styrofoam is not formed, and the temperature and time interval are also leaking, and the order before and after putting things has a relationship with the return of the child. The most critical raw material formula must be selected in accordance with the regulations. Through the following steps, the styrofoam gum can be formed, one first add white glue, the amount of white glue 90% can not be poured more or less, two add an appropriate amount of aloe vera gel, three add an appropriate amount of borax water, you can add a small amount many times, and then slowly according to your own feeling like a little harder mud can add a little more, a little thinner round line of mud can be a little less.

What materials do you need to make mud, please send it.

The main ingredients needed to make the mud are: flour: 2 cups, salt: 1 cup, water: 2 cups, tartar powder: 4 teaspoons, oil: 4 tablespoons, and pigments.

Prepare materials: toothpaste, toilet paper, water, glue, dish soap, coloring, molding water.

2. Prepare a clean container and squeeze in an appropriate amount of toothpaste.

3. Take two sections of toilet paper, tear them apart, and put them in a container.

4. Pour in a little water.

5. Stir with a spoon until the toilet paper melts.

6. After the toilet paper melts, pour in an appropriate amount of glue.

7. Pour in the dish soap again.

8. After the dish soap is poured, drop in a few drops of pigment, and the color of the pigment is free to choose.

9. Stir all the ingredients with a spoon evenly. 10. After stirring evenly, add a small amount of molding water many times, and stir while adding molding water.

11. Stir the styrofoam into shape.

Styrofoam can be successfully made with the following cavity excitation method:

Tools Materials: bowl, glue, white glue, shaving foam, laundry detergent, glycerin.

Method Steps:

1. First of all, in the bowl, pour a certain amount of glue and white glue.

2. Stir the glue and white glue evenly, then take out the shaving bubbles commonly used in the lead banquet at home, and squeeze out some bubbles into the stirred glue.

3. Then add a little laundry detergent and stir to shape.

4. In the process of stirring, if Wu Muguo feels that it is more wet, you can add some glycerin at this time, and then continue to stir until you finally feel that it is not very wet.

5. Styrofoam.

Styrofoam is a very interesting thing, especially for many children, they are very happy to dress up and sell fun, and the production method of styrofoam is also very simple, now I will teach you how to make styrofoam. The specific steps are as follows:

Step 1:

First of all, prepare the following materials: transparent glue, glycerin, washing and washing liquid, and molding water.

Step 2:

Pour a small amount of laundry detergent (shampoo or shower gel can be substituted if you don't have one) into a clean container, and then pour in another 100 or 200 ml of liquid glue.

Step 3:

After that, pour an appropriate amount of glycerin into it, and if there is no condition, you can use water instead of glycerin.

Step 4:

In the process of adding materials, we must keep stirring, how to make the raw materials mix together.

The first hall teases six steps:

Finally, we add a large amount of foam and stir well, adding a small amount of molding water but several times until it is formed.

Therefore, as long as you follow the above methods and steps, you will be able to easily make fun styrofoam.