What to do with Junzilan without roots? What should I do if Junzilan has no roots

The orchid has no roots, because the roots are rotten, so it should be removed, and after the subtraction, it should be disinfected. In order to provide a suitable environment for gentleman boys, the soil should be as soft as possible. Monarch orchid should not have too much water during the rooting period.

The surface soil should be dried before watering.

Don't throw away the rootless junzi orchid, deal with it like this, 40 days to have white roots, plant one and live one tree.

The vitality of the orchid is very tenacious, and because it saves time and effort to raise, it is used as an indoor ornamental potted plant by many families. However, when the root of the orchid is rotten due to improper maintenance, all the rotten roots must be pruned off, and the cut orchid can still survive? You may wish to take a look at what the Mawang Encyclopedia says about Wu Hail.

In fact, after cutting the roots, Junzi Orchid can be rooted with a smile, so you don't have to worry too much. In order to make the rootless Gentleman's Orchid take root as soon as possible, the following points must be noted:

1. The root system should be thoroughly disinfected;

2. Loosen the soil in time, and it is best to use plain soil or pine needles to root;

3. Keep the temperature at 20-25;

4. Do not water more during the rooting period, and the potting soil is not conducive to rooting;

5. Place the plants in an environment with sufficient scattered light, avoiding direct sunlight;

6. Don't always pull up the plant to observe whether it is rooted, so it is easy to be infected with bacteria;

7. Properly remove some old leaves, save nutrient consumption, and make it easier to root.

When the orchid shows vigor again, and new leaves grow, it means that its root system has grown, and the parents can return to their normal watering and fertilization state.

If there is no root, you need to use carbendazim to soak and disinfect the roots, and after 30 to 40 minutes, place it in a ventilated place to dry, and then plant it in the soil prepared by sand and vermiculite to maintain soil porosity, which is conducive to the growth of plant roots, and the temperature can be controlled between 18 and 28 degrees during later maintenance. How to deal with the lack of roots?

1. Disinfection treatment What to do if the orchid has no roots, how to plant the orchid without roots The orchid needs to be disinfected, soak the bottom of the orchid in carbendazim or potassium permanganate dilution solution for 30 to 40 minutes, and then place it in a ventilated place to dry its roots, and then use sawdust to wrap the roots to avoid rotting.

2. Planting soil When planting the orchid, it is necessary to provide loose and breathable soil, which can be mixed with sand and vermiculite, and then use high temperature to disinfect the soil, and then plant the orchid, and then use clean water to spray the soil to keep it moist.

3. Temperature environment Junzi orchid is suitable for growing in a warm environment, and needs to provide a temperature environment of 18 to 28 degrees when breeding, and should be sprayed with water mist to cool down when the temperature is higher than 35 degrees in summer, and in winter, it can be placed in a warm indoor place for maintenance to prevent the plant from being damaged by frost.

4. Water conditions Junzi orchid belongs to the fleshy root system, the water requirements are not high, so it needs to be watered once a week when breeding, and it should be increased to 2 times a week when the temperature is high in summer.

1. The rootless Junzi Orchid needs to be rooted. Soak the bottom of it in carbendazim or potassium permanganate solution, take it out and dry it for 30-40 minutes. Using a mixture of vermiculite and sand as potting soil, this reed sample can provide good drainage.

Wrap the bottom of it with sawdust, plant it in potting soil and spray it with a little water. After that, put it in a cool place and do not receive light. Do not water the leaf core during daily watering, otherwise it will rot.

2. Disinfection treatment: The lack of roots of the Junzi orchid is often due to root rot, so it is cut off. After cutting, it needs to be disinfected first, and carbendazim or potassium permanganate can be mixed with water to make a disinfectant.

Then soak the trimmed place in it and go to the place to dry after 30-40 minutes. The disinfectant solution should not be too concentrated, the carbendazim content should be around the same, and the potassium permanganate solution should be diluted into pink.

3. Potting soil preparation: In order to make the orchid take root, it is necessary to provide a suitable environment, and the potting soil is the first step to help it take root. The soil should be as soft as possible and well drained.

Too sticky soil is not good for the growth of the root system, you can use sand, vermiculite, etc. to make potting soil, which is conducive to its roots.

4. Plant and pot: After preparing the potting soil, you can replant the orchid. In order to have enough space for the roots to grow, you can wrap the bottom with sawdust and then put it in a pot to fill the soil. Then spray it with a little water and place it in a cool, ventilated place.

5. Follow-up maintenance: During the rooting period of Junzi Orchid, the water should not be too much, and you can wait until the surface soil is dry and then watered. Do not pour water into the core of the leaf, as this will cause it to rot. You can't see light during the curing period, and wait until it takes root and then slowly increase the light.

If there is no root, you need to use carbendazim to soak and disinfect the roots, and after 30 to 40 minutes, place it in a ventilated place to dry, and then plant it in the soil prepared by sand and vermiculite to maintain soil porosity, which is conducive to the growth of plant roots, and the temperature can be controlled between 18 and 28 degrees during later maintenance.

1. Disinfection treatment

Soak the bottom of the orchid in carbendazim or potassium permanganate dilution solution for 30 to 40 minutes, then place it in a ventilated place to dry its roots, and then use sawdust to wrap the roots to avoid rotting.

2. Plant the soil

When planting the orchid, you need to provide it with loose and breathable soil, you can mix sand and vermiculite, and then use high temperature to disinfect the soil, and then plant the orchid, and then use clean water to spray the soil to keep it moist.

3. Temperature environment

Orchid is suitable for growing in a warm environment, it needs to be provided with a temperature of 18 to 28 degrees when cultivating, and when the temperature is higher than 35 degrees in summer, it should be sprayed with water mist to cool down, and in winter, it can be placed in a warm indoor place for maintenance to prevent the plant from being damaged by frost.

4. Moisture conditions

Orchid belongs to the fleshy root system, the water requirements are not high, so it needs to be watered once a week when breeding, and it should be increased to 2 times a week when the temperature is high in summer.

How to raise a gentleman's orchid without roots? Do these 4 points well, and the pot is full of big white roots.

Here's how:1. Light. There should be enough light, you can properly shade in summer, and you should ensure that there is light at ordinary times, and do not put it in a cool place.

2. Moisture. Don't water too much when raising roots, otherwise it is easy to rot the roots, just keep the potting soil moist.

3. Nourishment. Only with enough fertilizer can the roots of the orchid be absorbed and grow more robustly, so that the orchid can raise a lot of roots, and the nutrients can be sunflower seeds, hemp seeds, Suzi, castor beans and other substances.