When will switches, sockets and lamps be installed during the renovation? Why?

Switches and sockets should be installed when the circuit is modified. This guarantees the quality of the construction and can also be sure that there are no problems with the wires.

Installation of sockets In principle, the correct sequence is to install switches and sockets first, and then install luminaires. This is because the light can only be lit properly after it is connected to the switch. Install the switch first to avoid unsuitable switches. And there is a situation where the lamps are replaced.

Before making the last coat of lacquer. This ensures the quality of the construction and also avoids the appearance of gaps.

I think it's possible to install socket switches and light fixtures after posting wallpaper, so that the floor and walls are not damaged, and the wires can be arranged in advance.

In general, it is more appropriate to install sockets and lamps at a later stage, that is, at the end of the installation.

The first is to pave the wallpaper, followed by the installation of radiators, and then the installation of switches and sockets and lamps.

Lights and switches are interdependent, install lights or switches first when decorating? Today, I will answer them one by one for you.

1. Considering the issue of safety, we have just started to decorate the house, and we must install the switch first and then the light. After the switch is connected, the power supply of the lamp can be temporarily turned off, and the lamp can be installed without closing the main power switch, which is convenient for testing and avoiding unnecessary troubles and problems.

2. You can find a special decoration company, which means that the decoration company must have a complete set of construction plans, and the switch and socket must be installed first. Lighting and household appliances are generally purchased by the landlord himself, and the merchant comes to install and debug, and it is not possible to do it without switches and sockets.

3. Install the socket in the kitchen, and pay attention to the socket of the stool must be far away from the stove to prevent the heat from damaging the socket; In bathrooms, balconies and other places near water, pay attention to the socket installation should not be too low, and should be equipped with splash-proof covers; In particularly humid, flammable, explosive gas and dust places, no socket should be equipped, otherwise it is easy to make the socket have oil and water vapor intrusion, causing a short circuit.

The decoration of a new house generally has decoration steps, and you can save a lot of trouble and time by following the decoration steps. So, when will the lights and switches be installed for the decoration of the new house? What is the order in which the lights are installed and switched?

The installation of switches, sockets and lights has its sequence, here follow us to understand the decoration process and precautions.

When will the lights and switches be installed for the decoration of the new house?

The process of installing the socket is basically arranged in the later stage of the decoration procedure, after the main project such as the ground and the wall are finished, it is installed together with the lamps and some electrical equipment, so that it is conducive to protecting the switch and socket from being damaged in the previous process, in addition, it is installed together with the lamps and lanterns belong to the work category of the electrician, and it is also more suitable for carrying out at the same time. Of course, some people consider that installing switches and sockets will cause slight damage to the wall, so it is okay to install it first and then treat the wall, so sometimes the specific situation also needs to be analyzed.

The installation of lights and switches is in chronological order

Considering the safety issue, when you first start to decorate the house, you must install the switch first and then install the light. The switch is connected to the back hall min, which can temporarily turn off the power supply of the lamp, and can install the lamp without turning off the main switch, which is convenient for testing and avoiding unnecessary troubles and problems.

Precautions for switch and socket installation

When installing switches and sockets, you should have a detailed understanding or record of the number and location of switches and sockets in each natural room at home, especially for wallpaper, sometimes wallpaper workers are not responsible, wallpaper hula is laid up at once, and he does not use a wallpaper knife to mark the hole in the position of your switch socket. So, you still need to know for yourself.

Decoration process reference:

1. Preliminary design - 2 main body demolition and modification - 3 water and electricity renovation - 4 carpentry - 5 tiling - 6 wall paint - 7 kitchen and bathroom ceiling - 8 cabinet installation - 9 wooden door installation - 10 floor installation - 11 wallpaper - 12 radiator installation - 13 switch and socket installation - 14 lamp installation - 15 hardware and sanitary ware installation - 16 curtain rod installation - 17 pioneer cleaning - 18 furniture entry - 19 household appliances installation - 20 home accessories.

The above is about when to install the lights and switches for the decoration of the new house, and the sequence of installing the lights and switches. When the lights and switches are installed, they can be painted on the wall, or they can be installed after the carpentry of the hydropower transformation, and the two should pay attention to the corresponding protective measures. For more details on the decoration steps, please stay tuned here.

As we all know, the installation of switches and sockets is a crucial part of the entire renovation project. Because if you don't pay attention to the installation of the switch, it will cause a series of troubles. So, when will the decoration switch be installed? Let's find out together!

1. When will the decoration switch be installed?

Under normal circumstances, when laying circuit wires and closing violently, it is necessary to reserve the socket embedded box, and wait until the woodworking project is completed to start installing the switch socket. However, it should be noted that protective measures must be taken when brushing the paint, so as to ensure the safety and cleanliness of the socket switch.

In addition, since the installation of the switch directly affects the quality of the living of every household in Qiaoshan, everyone must be meticulous when installing.

2. What should I pay attention to when installing the switch?

1.The location is too low.

When installing switches and sockets, many families feel that installing the switch too high will affect the aesthetics of the interior decoration, so they will choose to install the switch in a relatively hidden place. However, according to Dr. Xia Dong of the Institute of Electrical Engineering of the Chinese Academy of Sciences, such a practice can easily lead to owners splashing water into the socket when mopping the floor, resulting in leakage accidents.

Therefore, owners must not choose the position that is too low when installing the switch.

2.Feel free to install it.

When installing the switch, the power lead must use a copper wire cross-section. If you are buying a second-hand house, you must immediately replace the original aluminum wire with copper wire. Because aluminum wire is very easy to oxidize, it will eventually lead to dangerous accidents at the joint.

In addition, according to the survey of the car bridge, the probability of fire in houses using aluminum wire is dozens of times that of copper wire.

Summary: The above has introduced to you when to install the decoration switch and what to pay attention to when installing the switch, I hope to give you some small help. If you want to know more about the decoration switch, you can continue to lock our **, and the follow-up content will be more exciting!

No.

If the switch on the wall makes a sizzling sound after opening, then it is generally caused by the problem of poor contact in the wiring position on the back of the switch, so it is necessary to remove the switch cover and conduct a detailed inspection of the wiring position on the back of the switch to see what causes the poor contact, and then take the corresponding method to deal with it.

There are many reasons for poor contact at the wiring position on the back of the switch, and the processor is different depending on the reason. Some of them are caused by the aging of the reeds in the wiring position of the switch, which leads to the inability to connect the wiring position tightly. In this case, it is necessary to replace the reed or simply replace it with a new switch.

Precautions for light switches.

The light switch or socket is installed in a different place, and it should be installed according to the area of use. If the bathroom is a relatively humid place, try to install it above the meter, away from the wet area, and buy a waterproof or splash-proof box to ensure the safety of use and clear the cracks. The switch and socket in the kitchen should be kept away from gas pipes and open flames, away from high temperature areas, to ensure the safety of use.

According to the habit of installation, most people are used to using the right hand, the door is also to the right, the switch is best installed on the left side of the door, so that the switch light is much easier. It is best to install dual or multi-control switches to save the time of walking back and forth.