The lights don t turn on but the socket has electricity?

If the light is not on and the socket is electrified, it is recommended to focus on checking the control circuit of the lamp, including whether the switch is normal, whether the control wire of the lamp is reliable, whether there is any possibility of disconnection, and focus on checking the quality of the bulb! If you have poor do-it-yourself ability, please find a professional electrician to deal with it to avoid the risk of electric shock!

The light and socket are not necessarily controlled by the same live wire, so the situation that the light is not lit and the socket has electricity cannot say anything, but it can only prove that the three-phase home electricity in your home should be no problem. First of all, check whether there is an empty trip on the distribution box of the home, if there is, it means that the corresponding line has a short circuit or overload. If there is no empty trip, check whether the lighting circuit is broken, or it is possible that the bulb is broken, in short, there are many possibilities for failure, which need to be eliminated one by one.

It could be a problem with the light bulb, or it could be a problem with the wires. There may also be a problem with the lamp head. There may also be problems, so check it slowly and use the elimination method to check it.

Check whether the electric switch has jumped all the way first, and it may be good to send it up. The socket and the lighting are controlled separately, if the lights are on in other places, but the lights in this room are not on, it is certain that there is a problem with the lamp, or it may be a problem with the wiring or switch.

It means that there is a problem with the power supply circuit of the lamp, or the contact is poor due to the ablation of the switch contact, or the bulb is broken.

There may be a problem with the wiring of the electric light, or the bulb is faulty, it is recommended to find a professional electrician to repair it, and it will be dangerous to do it blindly!

The light is not on, but if there is electricity in the socket, it is because the light is broken, so this problem occurs.

Is the light broken, try to replace it with a new one, if it is on, it means that the light is broken.

Because it is generally controlled "separately"! The lights don't turn on, but it's normal for the socket to have power!

First go to the distribution box to see if the air opening of the light circuit has tripped, close it and try it.

Nowadays, the socket and the lamp are basically separated, and the socket is a bipolar air switch, and the lamp is a unipolar air switch.

So first determine whether all the lights are not on or if only one light is not on.

I'm sorry, we can't solve this problem, I can't solve this problem, I don't dare to give you easy methods and suggestions, please consult the relevant personnel to give you the correct answer, I wish you a happy life.

Do the math how much it will cost you to renovate your home

Everyone has a socket in their home, and when various electrical appliances are connected to the socket, as long as there is no problem with the circuit in the home, they can basically conduct electricity. But the socket has a light that does not turn on, what is the reason? 1. What should I do if the socket has electricity but the light is not on?

1. Check whether there is a problem with the circuit at home, you can use a multimeter to detect the fierce pin, especially the live wire and neutral wire of the socket, if you find a problem, you can replace the wire. 2. If the contact between the wire and the junction box is loose, it can be solved by tightening it directly. 3. There is a problem with the internal components of the lamp, and a new lamp needs to be replaced.

2. What are the reasons why the lights in the socket are not lit?

1. The most likely thing is that the circuit in the home is faulty, resulting in the socket having electricity, but the light is not on, especially the section of the line connected to the lamp.

2. It is also possible that the zero wire and the live wire on the terminal post of the lamp holder are faulty, sometimes if the two wires are in contact with each other, it will directly cause a short circuit, and the socket is electrified, but the lamp is useless, and this situation should be solved in time, because it is likely to lead to a fire.

3. It is also possible that the contact between the switch and the junction box is loose, and we need to check it.

4. It is also possible that the fuse contact is poor, which will also cause the lamp to be on for a while and not on for a while.

5. It is also possible that there is a problem with the lamp, such as the filament has been aged, or the lamp beads and light source drivers, these accessories have failed, which will cause the lights to be bright without destroying them.

Summary: What to do if the socket has electricity but the light is not on, if there is a problem with the socket, it needs to be checked and repaired in time to ensure that it can be used normally in the future. After reading it, I hope it will be helpful to everyone, if you want to know more about relevant knowledge, you can note the information of Qijia.com.

Enter the area and get the decoration for free**].

Enter the area and get the decoration for free**].

Reasons why there is electricity in the socket at home but all the lights are not lit: circuit breaker problems, open circuits, tripping of sub-switches or poor contact of the pile heads of incoming and outgoing switches, etc.

1. Circuit breaker problem

Check whether the circuit breaker trips or trips, and if there is a problem with the circuit breaker, replace it as soon as possible.

2. Break the circuit

To break the circuit, you need to find the breaking point, you can use the feeling of the empty envy pen, starting with the nearest lamp from the distribution box.

3. The branch switch trips or the contact between the pile head of the inlet and outlet switch is not high

Pull down all the branch switches, and then close them, you can solve it, if it is a switch with leakage protection tripping, pay attention to press the reset button to close.

Precautions for installing sockets

1. Pay attention to the location of the installation socket

When installing the socket, it is necessary to stay away from some more dangerous places, and pay attention not to install it around the gas meter, faucet, bedside, stove and equipped with a waterproof box, otherwise it will not only affect the normal use of the socket, but also easily occur gas **, circuit failure, human electric shock and other problems.

2. Make safety preparations

Before installing the socket, it is necessary to pay attention to disconnect all the dangerous power supplies in the room, and clean up the debris and dust in the socket base slot, otherwise it will bring certain danger to the builder during the installation process, harm to human health, and cause people to have the problem of electric shock.

3. Select the socket type according to the installation location

When installing sockets, it is necessary to choose different kinds of socket products for use according to the characteristics of different places of use. For example, in places with a lot of water consumption, such as bathrooms and balconies, where water is easily exposed, the sockets used should be splash-proof.