The socket does not control the light, why when the socket is plugged into the electrical appliance,

This is because of the wrong wiring, and the socket is connected in series with the wires of the light.

Summary. Why when using an outlet. The light bulb will flash one by one, which means that the plug and socket are not well inspected, and it is easy to cause ignition when plugging and unplugging.

You can clamp the opening of the socket with pliers, and remember to operate with the power off to avoid short circuit accidents. 1. The voltage is unstable, and this reason is relatively common. When the capacitance of the home is at a low value, and there are more electrical appliances used, then the voltage will be unstable, and the lights will flicker at this time.

2. The power supply is loose, some lights need to be plugged in, and if the plug is loose, the lights will also flicker. Just unplug it and plug it back in. 3. The control switch of the lamp has an indicator light, and the indicator light is repeatedly charged and discharged, resulting in flashing.

The solution is very simple, just remove the indicator light. 4. When wiring, the zero line is misconnected, and the lamp body is charged and causes flickering. If that's the reason, just reconnect the live wire correctly.

Why when using an outlet. The light bulb will flash one by one.

Why when using an outlet. The light bulb will flash one by one, which means that the plug and socket are not well inspected, and it is easy to cause ignition when plugging and unplugging. You can clamp the opening of the socket with pliers, and remember to operate with the power off to avoid short circuit accidents.

1. The voltage is unstable, and this reason is relatively common. When the capacitance of the home is at a low value, and there are more electrical appliances used, then the voltage will be unstable, and the lights will flicker at this time. 2. The power supply is loose, some lights need to be plugged in, and if the plug is loose, the lights will also flicker.

Just unplug it and plug it back in. 3. The control switch of the lamp has an indicator light, and the indicator light is repeatedly charged and discharged, resulting in flashing. The solution is very simple, just remove the indicator light.

4. When wiring, the zero line is misconnected, and the lamp body is charged and causes flickering. If that's the reason, just reconnect the live wire correctly.

The lights are turned off, the socket is plugged in, and the electrical appliances cannot be used normally, and the voltage is not right.

The voltage is unstable, and maintenance is recommended.

If the socket is not plugged in, the light can be used normally.

caused by excessive voltage.

It is possible that the voltage in your home will be unstable.

If this happens often, there may be a problem with the electric light, or there is a problem with the interface, or the electric light is often soaked in a humid environment. To investigate the causes one by one, and then find the reasons to solve them, ordinary people have no way to solve it, you can find a professional to solve it. If the light is broken, go buy the light, and if there is a problem with the line, you need to change the line.

Precautions for using outlets.

1. When using the socket, avoid pulling the plug with wet hands, because water is a conductor and can easily lead to electric shock accidents.

2. When some people pull the plug, they will pull the power cord hard, so that the power cord and the plug connection part will be pulled off, resulting in the electrical appliances can not be supplied normally.

3. If the socket is found to be abnormal, it must be replaced in time, and the danger must be found.

4. If the socket is often loose, it means that the reed is not elastic enough, and the socket has reached the age of scrapping.

The bulb will flash when using the socket, which means that the power cord of the bulb is terminated from the socket, and the wiring of the bulb may have loose and poor contact, so the bulb will flash when using the socket.

When using a socket bulb, the bulb will flicker and flicker, I think this problem will occur if you are using a power tool or something, and the power supply of your bulb should be the same as the socket.

The lead wire of the socket may be the same as the power supply line of the lamp, which is not connected firmly, and the power connected is smaller.

The contact is not enough, it is very dangerous, so change the socket to use.

Why does the socket use electricity and the light flashes?

Why does the socket use electricity and the light flashes? Kiss! Hello, glad to answer for you.

Socket electricity, the light will flash for the following reasons: the spring in the socket is not correct 1, the socket can control the light, it is said that your socket is equipped with an indicator light, when you plug the power of the lamp into the socket, because the wire diameter is small, and the power of the lamp is large, the voltage drop, so that the voltage is lower than 5, the original indicator light on the socket is designed according to the calculation of 220V, its step-down current limiting resistor, is just equipped, when the voltage drops, the neon tube fluorescent lamp inside will produce a flash, this phenomenon, The same goes for my indicator light, which is normal, but it is durable and difficult to break. 2. The second kind is if you say that the socket can control the light, but after plugging in the lamp, it flashes and flashes, which means that your socket is equivalent to installing a thyristor in it, and the potentiometer twist is used to adjust the brightness of the lamp, when the power supply is turned on, the voltage is in the lowest state, only a few tens of volts, once you connect the bulb, the voltage and current are not enough, at this time, it can also be due to the poor contact of the carbon film resistance of the potentiometer, and there will be a flickering unstable state.

This is also the case with my thyristor desk lamp. I sometimes have to do a spin to get normal. 3. It may also be that the screw of the wire pile in the socket is not tightened, or the spring in the socket is not correct and loose, in short, its problem is that the contact is poor, when there is a certain current, the contact can be flashed when there is a fire.

4. There is also a possibility that the socket is equipped with a switch, when the elasticity of the switch is abnormal, the contact is poor, and the ignition will flash and flash. Hope mine can help you! Do you have any other questions?

Hello dear, I'm happy to answer your questions The reasons for the flashing of the light when the socket is plugged in may be the following aspects:1Voltage instability:

When the circuit voltage of the socket is unstable, it can cause the bulb to turn on and off. Voltage instability can be caused by circuit overload, circuit failure, insufficient power supply, etc. 2.

Poor plug contact: Poor plug contact with the socket may also cause the bulb to turn on and off. If there is poor contact between the plug and the socket, the current will be unstable and the bulb will turn on and off.

3.Problems with the bulb itself: The quality of the bulb can also cause the bulb to turn on and off.

For example, poor contact of the bulb, loose filament and other problems can cause the bulb to turn on and off. 4.Switch Issues:

Poor contact of the switch can also cause the bulb to turn on and off. If the contact of the switch is poor, the current will be unstable and the bulb will turn on and off. In order to solve the problem of flashing lights when plugged in to the socket, you can check whether the circuit where the socket is located is stable, check whether the contact between the plug and the socket is good, replace the bulb, etc.

If the problem cannot be solved, it may be necessary to seek the help of a professional for overhauling. At the same time, in order to ensure the safety of household electricity, it is recommended to install electrical protection equipment such as overload protection switches.