How to connect the Honor wireless router, and how to connect the Honor mobile phone through the rout

Connect a router wireless connection, which can be bridged.

2. Set up your own router, set the SSID of your own route to be exactly the same as other routes, and the encryption method and channel should also be exactly the same;

3. Set the IP address of your route in the same network segment as the previous route, and finally disable the DHCP function.

4. Turn on the WDS function of your own route, and enter the MAC address of the neighbor route in the MAC address option;

5. Save and restart the route, and you can access the Internet wirelessly.

6. You can also connect two routers with network cables, and the setting method can be "routed to router".

Other. This one is the primary router and the other is the secondary router.

There are two options:

1: The secondary router is connected to the WAN port.

The two routers are set to different network segments, i.e.:

The IP address of the primary router is if.

The IP address of the secondary router can be set to:

You can enable the DHCP service of the secondary router.

The two ends of the network cable are connected to the LAN port of the primary router and the WAN port of the secondary router.

2: Connect to the LAN port of the secondary router.

The two routers are set to different IP addresses in the same network segment, for example:

Primary router IP:

Secondary Router IP:

The secondary router turns off DHCP

The two ends of the network cable are connected to the LAN port of the primary router and the LAN port of the secondary router.

Dear, hello, I am glad to answer for you how to connect your Honor mobile phone through the router with one clickA1, set the router to surf the Internet, and make sure that the router indicator light is solid green (or white blue is always on). 2. Go to your phone settings > Wi-Fi. When Wi-Fi is turned on, the phone will automatically recognize the Wi-Fi of the router with the H (or Hi) button (the Wi-Fi with the logo to the right of the Wi-Fi name is the Wi-Fi of the router with the H or Hi button).

3. Tap the Wi-Fi name. 4. Keep your phone close to the router (within 1 meter). Observe the router's indicator light, wait for about 1 minute, it will automatically change to red slow flashing (or orange years no slow flashing green slow flashing blue slow flashing breathing state flashing), indicating that the router has discovered the phone.

5. At this time, press the H (or Hi) button of the router and release it, the router indicator will flash faster, indicating that the router is establishing a connection with the mobile phone. 6. When the router indicator stops flashing, it means that the phone is connected to the router's Wi-Fi. How to use one-click connection of Huawei router:

HUAWEI Box (or Honor Box)1、Set the router to surf the Internet,Make sure the router indicator is solid green (or white and blue)。 2. Place the box (not connected to Wi-Fi) within 1 meter of the router and turn on the power supply. 3. Go to the box to set up > network.

Bluetooth > Wi-Fi. The box will automatically recognize the router Wi-Fi with the H (or Hi) button. Tap the Wi-Fi signal.

4. Observe the indicator light of the router, and after waiting for about 1 minute, it will automatically change to red and slow flash (or orange slow flash, green slow flash, blue slow flash, breathing and clever state flashing), indicating that the router has found the box. 5. At this time, press the h (or hi) button of the router and release it, the router indicator will flash faster, indicating that the router is establishing a connection with the box. 6. When the router indicator stops flashing, it means that the box is connected to the router's Wi-Fi.

Take the Honor FlyPods wireless earbuds as an example, the connection method is as follows:

1. Put 2 earphones into the charging case, with the lid of the charging case open, press and hold the function button of the charging case for 2 6 seconds until the white light in the box flashes and releases, and the earbuds enter the pairable state.

3. If the pairing is successful within 3 minutes, the indicator light of the travel circle in the box will be extinguished; Please repeat step 1 and press and hold the button for 2 to 6 seconds to re-enter the pairing state.

Pay attention to the stove chain: due to the characteristics of Bluetooth headsets, such as the presence of electromagnetic waves in your area.

If the Bluetooth connection is interfered with, the earbuds may be silent or disconnected.