How can I connect to my school s wireless router?

Broken yarn. That man really knows how to blow. Copying someone else's IP is called breaking?

First of all, you have to figure out its router IP. Generally, yes.

The computer connected to it is usually the last bit to be changed. But I guess your student union isn't the most primitive anymore.

Just ask them.

There is another way, go to the computer city to buy an antenna, you can have a 70% chance of cracking other people's wifi. Then go online.

I've seen it. However, the internet speed is very poor... Look at the web page all card.

Try using a static IP address, manually set your IP to the last three digits, you can choose between 2 254) Subnet Mask Router (Gateway) Address You can try several more IP addresses.

The dlink network may have blocked your IP address in the route. It's useless to use anything. Understand?

The route of the student union may be the assigned IP specified. Of course you can't get to it. Your classmate is connected. It was he who got the designated IP segment.

As soon as the original owner went online. Definitely IP conflicts.

Having access to the router will solve the problem.

Here's how to connect the campus network router:Tools Raw materials: Redmi K40, TL-R402 wireless router, network cable.

1. First, connect the router and the broadband modem with a network cable, and the connection method is to connect the LAN port of the broadband modem with the WAN port of the router through the network cable. After the hardware is connected, use your mobile phone to connect to the wireless signal of this router, then open the mobile phone browser, enter the login address and login password of the router, log in to the background and select Quick Settings.

2. Then fill in the broadband account number and password as required.

3. Then set the wireless name and password to save and then the router can be used normally.

How to set the router login address?

The login address and login password of the router are generally admin, but not all routers have this login address and password, and some router login passwords do not have a default password.

The specific router login address and password can be flipped through the small label on the back of the router, or directly consult the router's manual.

How to use the TL-R402 wireless router to connect to the campus network:

1. First of all, prepare two network cables, one is the router to link the wall port, and the other is the router to connect to the computer.

2. The line connecting the router to the wall port, one end of the router must be connected to the LAN port (1-4), any port can be!

3. First of all, manually configure the IP address of your computer through the local connection, and the gateway is.

4. Then enter it in the browser, log in with the default username and password on the wireless router, add a password to your wireless router, prevent others from logging in, and turn off the DHCP function.

5. After configuring the wireless router, configure the IP address of the local connection to automatically obtain, search for the wireless network, find the wireless network covered by your router and connect it, connect to the wireless network and use the authentication client to authenticate, and you can use the Internet after the authentication is passed.

Principle: The devices in the network communicate with each other mainly with their IP addresses, and the router can only use the specific IP address to ** data. An IP address consists of two parts: a network address and a host address.

In the Internet, subnet masks are used to determine the network address and host address. The subnet mask is 32 bits like the IP address, and the two are one-to-one correspondence, the "1" in the subnet mask corresponds to the network address in the IP address, and the "0" corresponds to the host address, and the network address and the host address constitute a complete IP address.

In the same network, the IP addresses must be the same. Communication between computers can only be done between IP addresses with the same network address, and if you want to communicate with computers in other network segments, you must go through the router**. IP addresses of different network addresses cannot communicate directly, even if they are very close together.

Multiple ports of a router can be connected to multiple network segments, and the network address of the IP address of each port must be the same as the network address of the connected network segment. The network address of different ports is different, and the corresponding network segment is also different, so that the host in each network segment can send data to the router through the IP address of its own network segment.

Here's how to do it:Tool: magicbook.

Operating system: Windows 10.

1. First of all, you need to open your computer to find the network, and then go to the network and sharing center.

2. After entering, the following page will appear, then select Set up a new connection or network, and click to enter.

3. After clicking Enter, select Connect to Internet on the page that appears.

4. Create a new connection without a link after entering.

5. Once you have created a new link, select Broadband Connections to establish a new broadband connection.

6. Enter the user name and corresponding password, and click "Connect" to use the campus network.

Enable the wireless function of the wireless router, and then set the connection method, you can choose the WPA2 method with higher security.

You use a wired connection to the router to go in, first turn on the wireless function of the router in the wireless connection.