A complete list of common car light language, how to play car light language?

Flashing headlights. Waiting for a car at an intersection and when the green light is on, sometimes the car in front of you does not move at all. It may be that the novice, nervous, slow start, or the driver in front of him did not pay attention to the change of the indicator light and was distracted when waiting for the red light.

At this time, the car behind usually takes some measures to give the other party a hint. Some people will honk wildly, but this impatient urge is not only **, but can also be counterproductive. Therefore, in such a situation, it is more appropriate to have the headlights flashing to alert the driver of the car in front.

If there's no movement, you can flash it again, but don't do it too often.

The headlights remind twice, and the double jump light indicates dissatisfaction. When driving at night, the biggest headache for everyone is to meet a guy with high beams on. This kind of behavior of not turning on the lights in a car is not uncommon in night driving.

In fact, when driving at night in urban areas, in most cases, the road surface is well lit and there is no need to turn on the headlights. In sections where road lighting is not ideal, turning on the headlights is an important factor in inducing a car accident. The headlights flicker to agree, and the headlights flicker to refuse.

On elevated or highways and some ordinary roads, lane merging is often encountered.

The headlights flash "Agree" and the headlights flash "Decline". On elevated or highways, as well as some ordinary roads, lane merging is often encountered. On elevated ramps, traffic flows alternately.

In this case, if the communication between the vehicles is not ideal, it is likely to cause a vehicle collision. In a confluence lane or a section of road where traffic meets, it is very dangerous to grab lanes with each other. Vehicles that need to merge lanes are not allowed to change lanes directly.

When a car prompts you to change lanes, do you agree to the lane change or refuse to do so? It is required that the car behind must give the other party a clear cue.

The correct use of light language can make it better and easier to communicate with other drivers on the road, avoid unnecessary friction, reduce accidents, and make the car environment on the road more harmonious. After becoming proficient in using several light languages introduced in this article, you will find that the probability of using a car horn is reduced; You will also get an inexplicable sense of accomplishment because others respond to your light words.

If you are driving at night and the distance between the car in front is relatively close, you should choose the low beam, if it is an open road, you should choose the high beam, if you want to remind the other party that you want to change lanes or overtake, you should turn on the double flash, if you find that the car in front is in danger, you should flash the headlights three times, and the other party will flash three times after discovering your signal.

If you want to overtake, the headlights flash, if the other party has been turning on the high beams at night, the headlights can flash twice, if the car behind is too close, you can intermittently turn on the brake lights, if you want to brake urgently, you should turn on the double flash, if you express gratitude, you can double flash for three seconds.

The headlights flash, urge the front car to drive, the headlights flash once or twice, agree to the front car to change lanes, the headlights flash, refuse the front car to change lanes, the headlights flash three times, kindly remind the neighboring car that there is an abnormality, intermittently step on the brake lights, and tell the rear car not to be too close to the car.

When the headlights flash, the car in front can usually realize it, which is disrespectful to people and easy to cause disgust among the drivers in front of them. There is also a preference for using the car on the road, sometimes you will find that there is a problem with the car in front, such as the trunk is not closed, the brake light is not on, the tire pressure is obviously insufficient, etc., it is difficult to tell the other party during the driving process, at this time, even if the headlights flash 3 times can remind the driver. What else is the point of headlights when driving?

Maybe it's a novice, waving nervously, starting slowly, or maybe the driver of the car in front doesn't pay attention to the change in the indicator light, such as being distracted when the light is red. To this end, we will introduce several commonly used car lights for you to use during driving. Waiting for a car at an intersection, when the green light is on, sometimes the car in front does not move.

At this time, the car behind will generally take some measures to give the other party a hint. Some people honk their horns, but this kind of frivolous approach is not only rude, but can also have the opposite effect. Some riders were angry and simply drove the car very slowly, deliberately pressing back, and the result was that everyone suffered.

In this case, honking is obviously not right, and we can use flashing headlights instead.

Similarly, if we flash the rear car 3 times in a row while driving, we should pay attention to whether there is a problem with our vehicle and check it in time. When encountering a vehicle alternating with the road or traffic section, others call the turn signal to indicate that they have the need for the road, if they agree, flash the headlights, if it is inconvenient to give way, continue to flash the headlights several times to refuse. Sometimes in a hurry, the car in front is moving slowly, you can flash your headlights to tell the driver that you want to overtake, and remind the driver to give way.

In the process of driving, some rear cars are too close to each other, and it is easy to scratch if you don't pay attention to them, so gently press the brakes to remind the rear car to keep a safe distance. Indeed, sometimes if we can understand these car words, the key moment can bring us a lot of driving convenience.

The owners of the car friends group, playing off-road, playing drifting, using the rest time to code words in person, using easy-to-understand text The owner's various questions, please like and pay attention to what you find useful, and the questions you want to send private messages can also be one-on-one!

<> "Some common car light words.

In the process of driving a car, a certain amount of information exchange is required between vehicles, which derives a special information expression method of car light language. So, what do we do when we encounter someone flashing their lights on the road? Or do we need to remind other vehicles of something, what to do?

Flash a green light to alert the vehicle in front to depart or prepare to overtake.

When waiting for the traffic light, it is already green, but sometimes the car in front is delayed. Maybe because the driver in front of us is distracted, at this time, if we regret being behind, we can kindly flash the headlights to remind the driver of the car in front. In addition, when overtaking, you can flash to remind the car in front that you want to overtake, attract the attention of the car in front and reduce the risk of accidents.

Flash twice to remind you to turn off the high beams for oncoming cars.

When driving at night, the most headache for everyone is to encounter the "little cutie" who turns on the high beams to the end, and this behavior of not switching the lights when driving at night is not uncommon. When we encounter these uncivilized behaviors, then you can use the light language, flash the headlights twice, and tell the other party that you are flashing me, please switch the low beam.

Flash three times: Alert the vehicle in front of you that there is an abnormality.

When following the car, if you find that the front car is abnormal, such as the tire pressure of the front car is obviously insufficient, the trunk is not closed properly, ......, we can use the headlights to flash three times in a row to alert the car in front. Of course, if someone flashes their headlights at you three times, you should also pay attention, maybe something is wrong with your car, the car behind you is giving you a kind reminder, you should pull over and check in a safe place as soon as possible.

Flash: Refuses the request of the vehicle next to you to merge in the lane.

When we need to merge in scenarios such as changing lanes to overtake or exiting the main road on a highway ramp, if we find that the rear car in the next lane has flashing its headlights, it means that the other party refuses to give way. At this time, do not force overtaking or merging, you should slow down and wait for the next opportunity to avoid causing traffic accidents.

Intermittent brake light: Remind the rear car to pay attention to the following distance.

Keeping a proper safe distance is an effective way to avoid accidents when driving on the highway, but sometimes there are people who like to drive at high speed and keep a relatively close distance. If this happens, we can lightly press the brakes and intermittently turn on the brake backcrack light to remind the rear car to pay attention to the following distance!

Constant double flashing lights: poor vision or vehicle malfunction.

In rainy and foggy weather, the visibility is less than 100 meters, or when your own vehicle breaks down, you can turn on the double flashing lights to remind other vehicles to avoid; When the vehicle is parked on the side of the road due to a fault, it is also necessary to turn on the double flashing lights and place a warning triangle at the specified distance behind the vehicle to remind other vehicles to pay attention to avoidance.

Car light language: 1. After the green light is on, the front car can flash the headlights if it does not go. At night, when the strong lights flash, you can flash the headlights twice to remind, and the bright double jump shows dissatisfaction; 2. When merging, the headlights flashed "agree", and the headlights flashed "refuse".

If you find that there is a problem with the neighboring car, you can flash the headlights three times to remind you; 3. If the rear car is too close to the car, the brake light can be turned on in stages. When the projection distance of the car light changes from far to near, it means that the car is approaching or entering the uphill slope; 4. When the projection distance of the car lights changes from near to far, it means that the car has entered a gentle slope on a downhill or from a steep slope. When the vehicle lights leave the road, it means that there is a sharp bend ahead or the vehicle has reached the top of the slope; 5. When the lights are moved from the middle of the road to the side of the road, it means that there is a general curve ahead.

When the lights move from one side of the road to the other, it indicates that there is a continuous curve ahead.

1. If you are about to turn at the intersection, please use the correct lights (alternate high and low beams no less than 2 times).

2. If you are driving on a low-visibility road, please use the correct lights (turn on the high beams).

3. If you are about to pass through a sharp bend, please use the correct light (alternate high and low beams no less than 2 times).

4. If you are going to pass through the slope, please use the correct lights (alternate high and low beams no less than 2 times).

5. If you are going to cross the arch bridge, please use the correct lights (alternate high and low beams no less than 2 times).

6. If you are going to cross a pedestrian crossing, please use the correct lights (alternate high and low beams no less than 2 times).

7. If you are going to pass through an intersection that is not controlled by a traffic light, please use the correct lights (alternate high and low beams no less than 2 times).

8. If you are about to overtake, please use the correct lights (turn on the left turn signal first, then alternately use the high and low beams no less than 2 times, and then turn on the right turn signal).

9. If you are going to meet other vehicles, please use the correct lights (turn on the low beams) The "Regulations for the Implementation of the Road Traffic Safety Law" have the following clear provisions on the use of lights, and those who do not use the lights in accordance with the regulations will be fined 1 point, so please use your lights correctly. 1. When the street lights are turned on at night, or when driving in low visibility conditions such as fog, rain, snow, dust, hail, etc., the headlights, marker lights and rear position lights should be turned on. 2. Turn on the turn signal 100 meters to 50 meters in advance when turning, changing lanes, overtaking, making a U-turn, and pulling over.

3. When a motor vehicle passes through an intersection controlled by a traffic signal and turns left, turn on the turn signal, and turn on the low beam when driving at night. 4. When the rear car and the front car driving in the same direction are driving in close proximity, high beams shall not be used. 5. On roads without central isolation facilities or without a central line, low-beam headlights should be used at night when meeting vehicles in the opposite direction 150 meters away, and low-beam lights should be used when meeting non-motorized vehicles on narrow roads, narrow bridges, and non-motorized vehicles.

6. When a motor vehicle passes through a sharp bend, slope, arch bridge, pedestrian crossing or an intersection without traffic signal control at night, it shall alternately use high and low beam lights.

Hello, there are a lot of this, it's hard to finish, I suggest you, there is a comprehensive tutorial inside, I hope mine can help you, if you have any questions, please continue to ask me!

The car light language is as follows:

One: Overtaking or the front car does not go after the green light is on: The headlights flash.

Two: found that there is a problem with the neighboring car, the light language: the headlight flashes three times.

Four: driving should be combined with the light language: the headlights flashed "agree", and the headlights flashed "refuse".

Five: the rear car is too close to the car, and the light language: intermittently turn on the brake light.

Seven: Emergency braking: turn on double flash in time.

Eight: Thanks: double flash for three seconds.

By using the light language correctly, it is possible to prevent traffic accidents and drive safely.

Emergency call for help, three high beams, three double flashes.

Be aware of your behavior by pressing and holding the high beam for three seconds.

If there is a problem with the car, please stop and check the high beam with a whistle and three times.

I'm in a hurry, so please let me let a whistle blow the high beam.

Bless you with two whistles and two high beams.

Sorry for the triple double flash.

It's okay to have three high beams.

Thank you for the triple double flash.

You're welcome three high beams.

The light language is a communication tool, which should make different signals of different lengths to transmit information according to the intermittent light on and off. In ancient times, the language of lights played a great role in communication between people.

2What do you know about car lights?

The details of the steam vertical royal car lights are as follows:

One: Overtaking or the front car does not go after the green light is on: The headlights flash.

Two: found that there is a problem with the neighboring car, the light language: the headlight flashes three times.

Four: driving should be combined with the light language: the headlights flashed "agree", and the headlights flashed "refuse".

Five: the rear car is too close to the car, and the light language: intermittently turn on the brake light.

Seven: Emergency braking: turn on double flash in time.

Eight: Thanks: double flash for three seconds.

Through the correct use of lamp language, the purpose of preventing traffic accidents and driving safely can be achieved.