How to connect the network cable crystal head, how to connect the network cable crystal head

Prepare the tools, raw materials.

1. Crimping pliers with 8P slot.

2. Category 5 network cables.

3. Crystal head.

Then we use the peeling function of the network cable pliers to peel off the outer skin about 2cm, then we can see the colors of orange, blue, green, brown, white orange, white green, white blue, white brown. We place the order is: white orange, orange, white green, blue, white blue, green, white brown, brown, it is recommended to use this method, which is more versatile and suitable for computers and routers, dial-up modems, and switches.

After the position is placed, the network cable is laid flat and straight, and the tangent knife is used to cut it together, the usual network cable pliers of the tangential knife are available, be sure to cut neatly, and then put it flat into the crystal head, and push it forward, when the line is neatly arranged from the front of the crystal head, use the crystal head pressing module of the network cable pliers to squeeze it.

There are two ways to connect the network cable:

First, direct connection method (parallel wire connection method): the same equipment, use the direct connection method, that is: both ends are TIA EIA-568A standard or TIA EIA-568B standard.

The connection methods at both ends of the network cable are: white orange, orange, white green, blue, white blue, green, white brown, brown.

Second, cross-wired connection: the same equipment, use cross-wired connection, that is: one end is TIA EIA-568A standard, and the other end is TIA EIA-568B standard.

One termination method of the network cable is white-green, green, white-orange, blue, white-blue, orange, white-brown, brown. The other end is: white orange, orange, white-green, blue, white-blue, green, white-brown, brown.

Both methods are available, here I recommend using the direct connection method, because it is simple, the wiring method at both ends of the network cable is also the same, both are white orange, orange, white green, blue, white blue, green, white brown, brown.

There are two ways to connect the network cable crystal head:

One is the direct interconnection method, and the other is the cross-interconnection method.

The practice of crossing the line is: 568A standard at one end and 568B standard at the other end.

The method of direct connection is that both ends are 568A or 568B.

First, use crimping pliers to cut off the rubber of the network cable by about 2 cm, exposing 8 strands of inner wire. Then arrange the network cables according to the standard line sequence of 568a or 568b, then cut the end of the 8 strands of wire, turn the end of the crystal head with a plastic spring sheet down, and the end of the metal pins up, insert the neat 8 strands into the crystal head, and make it tightly top at the top, and finally insert the crystal head into the 8p slot, and hold the crimping pliers tightly.

Prepare materials and tools: network pliers, crystal heads, line testers.

1. Peel off the net wire skin, put the network cable into the network cable pliers and turn around.

2. Arrange the eight network cables in the order of B mark.

3. Cut the network cable half a centimeter away from the network cable.

4. Put the cut network cable into the crystal head (pay attention to the line sequence).

5. Put the network cable head into the network cable pliers for compaction (note that the network cable skin is put into the crystal head, if you don't put it in, it will not be firm).

6. Use a line tester to see if it works.

At present, the network is so popular, every household has used the network, so how to connect the network cable connector do you know, let me introduce it, there are two ways to connect the network cable crystal head, one is the direct connection interconnection method, and the other is the cross interconnection method. The practice of crossing the line is: 568A standard at one end, 568B standard at the other end The practice of parallel lines is:

Both ends are 568A standard or 568B standard, (generally used are 568B parallel lines) 568A standard: green and white, green, orange and white, blue, blue and white, orange, brown and white, brown. 568b Standard:

Orange white, orange, green-white, blue, blue-white, green, brown-white, brown. You can notice that the difference between the two methods is that the orange and green colors are swapped. Use parallel wires if the two connected parties are not equal, such as a computer connected to a router or switch, or if two connected devices are equal, use a crossover wire, such as a computer connected to a computer.

I hope mine can help you a little. The above is just a regular connection! But it's okay for you to have both of them!

Because the general network cable is only used for others, even if it is not connected, it can be used. You can try it yourself, I hope it will help you.

The connection of the crystal head of the network cable.