What to do if the faucet is clogged and the water flow is small, what is the matter with the faucet

At the very top of the faucet, there is a small thing called a "foamer". The inside of the foamer is a multi-layer mesh structure, which is easily clogged by sediment and scale. The faucet can be removed and the filter can be removed to check for impuritiesIf so, clean it and then install the filter back.

Or the water flow of all the faucets in the house is very small, so we can only find the property or we can install a booster pump at the outlet of the water meter at the home, and the problem can be solved after the water pressure is restored.

The treatment of a clogged faucet with a small flow of water is as follows.

1. Unscrew the faucet outlet to check and clean it, and see if the water is restored after installation. Check the connection between the faucet and the hose, some faucets are equipped with filters to prevent sand from entering the sand, which intercepts a lot of debris and causes blockage.

2. Gently knock the filter screen in the pool, sand and other impurities will fall naturally, rinse and install it as it is. Do not use your hands to buckle it, as this will press the sand into the strainer and get stuck. Be careful not to wash the mat away.

3. After installation, if the water flow is still slow, this is blocked between the faucet and the water pipe, at this time, you have to close the main valve of the water meter outlet of your own water meter, and then, use a wrench or pipe wrench to unscrew the faucet, see if the water inlet of the faucet is blocked by small stones or other things, after clearing, it must be installed.

Causes and solutions for low flow of water in the faucet.

1. Insufficient water pressure

The water flow of all the faucets in the house is very small, so we can only find the property or we can install a booster pump at the outlet of the water meter at home, and the problem can be solved after the water pressure is restored.

2. The water pipe is connected to too many faucets

If the same inlet pipe is connected to multiple faucets and the water is discharged at the same time, it will also cause a small flow of water from the faucet, in which case you can turn off the other faucets and leave one place.

3. The water pipe is blocked

If the faucet has a small water flow, it may be because the water pipe is blocked, then you can close the main valve of the water pipe and the water meter, and then open the water pipe to see which piece is blocked, we only need to dredge the blocked place, and the flow of water in the faucet will become larger.

The reasons why the faucet has a small flow of water are water pressure problems, clogging problems, and aerator problems.

1. Water pressure problem

If the water in the faucet in the home is often smaller, accompanied by some noise, it may be caused by insufficient water pressure, which is more common in high-rise households. To solve this problem, you can seek the help of the property in the community, or install a booster pump at home, which can also effectively improve the problem of small water output.

2. Blockage problem

If the water quality is not clean, or there is some sand and gravel in the water, it is easy to cause the pipes or faucets to be blocked, which will make the water less available. In this case, we need to remove its spout and carefully check the strainer.

If there are large particles or stains on the filter screen, you need to put the filter screen in your hand and pat it gently, slowly let these impurities fall off, and then rinse with water.

3. Aerator problem

Usually, when cleaning the faucet, many friends simply clean the surface and do not clean the inside, but the amount of water in the Xunzi faucet becomes smaller, and it may also be caused by the internal aerator being blocked. If this is the case, take the faucet apart, remove the aerator, soak it in vinegar and clean it with a soft-bristled brush.

Precautions for the use of faucets:

Do not use too much force to open and close the faucet, just turn it gently, and do not use the handle as a handrail support or use. Try not to collide with hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the gloss of the surface coating.

When the room temperature is lower than zero degrees Celsius, if you find that the faucet handle feels abnormal, you must use hot water to scald the bathroom product until the feel is normal, so as not to affect the service life of the faucet spool.

Dear, the faucet is clogged and the water flow is small, we can solve it by the following methods: remove the scale: disassemble the faucet, soak it in vinegar or citric acid solution for a period of time, and clean the water with a brush.

Be careful not to scratch with hard objects to avoid damaging the surface of the faucet. Remove impurities: Take the faucet apart and use a fine needle or toothpick to remove impurities and dirt from the faucet holes.

Adjust the water pressure: If the water pressure is insufficient and the water flow is small, you can adjust the valve of the faucet or water pipe to increase the water pressure. Replace the filter:

The filter on the faucet may become clogged with limescale and impurities and need to be removed for cleaning or replacement. If none of the above methods can solve the problem, it is recommended to ask a professional for inspection and repair. At the same time, it is necessary to pay attention to keeping the faucet clean and hygienic, and cleaning and maintaining it regularly to prolong the service life.

The faucet is clogged and the water flow is small, and the water pressure can be checked.

It is recommended that the cleaning method is to remove the filter screen of the faucet for cleaning, insist on using it every day after it is difficult, and then install the filter screen of the faucet filter back after the water flow becomes larger.

The principle is that there are a small amount of tiny solid impurities in the water pipe, especially the iron pipe, after a long period of use, the tiny solid impurities are piled up in the faucet by the faucet filter, so that the faucet is partially blocked, after removing the faucet filter, the blockage will be slowly washed away by the water flow, and the water flow head will become smooth.

The water shop is clogged. First, if you do not pay attention to the installation of pipe joints, there are large residues left at the joints, and it is recommended to hire professionals to reinstall pipe joints. Second, the pipeline is aging, or there is a large amount of sediment in the pipeline that has not been used for a long time, so it is recommended that the pipeline be used frequently, and plastic pipes or gold-plastic composite pipes should be used.

Maintenance tips

1. Clean the surface and inside of the faucet regularly. After using the faucet, the surface of the faucet should be cleaned, especially if there is oil stains on it. However, it should be noted that you can not use a wire ball when cleaning, otherwise it will scratch the surface of the faucet, and you can use a scouring pad or a soft rag to wipe it.

At the same time, you should not use highly acidic detergents to clean the faucet to avoid corrosion of the faucet surface.

2. Daily care of the faucet. It is best to regularly spray the surface of the faucet with car wax to wax. Let it sit for 5 minutes before wiping it off to maintain the finish of the faucet.

In addition, you can't touch the faucet with dirty hands or oil stains on your hands, which is not only not easy to clean, but also affects its finish.

3. Use the faucet correctly. Finally, when opening and closing the faucet, it should be lighter, not to twist the faucet very hard, and not to use a hard object to collide with the faucet.

Hello dear, happy to answer for you. Solution to the small flow of clogged faucet: The reason why the faucet is clogged and the water flow becomes small may be that the water outlet is blocked by scale, sediment, foreign objects, etc., or the valve or filter in the faucet is blocked.

This can be solved by pouring white vinegar or acidic detergent into the inside of the faucet, soaking for a period of time and then brushing to make limescale and debris pine oranges noisy. Use a toothbrush or other small stiff brush to remove limescale and debris from the faucet outlet.

Remove the faucet core for cleaning, clean the valve or filter and then assemble it. If the problem still cannot be solved, it is recommended to contact professional maintenance personnel for maintenance and maintenance. It should be reminded that in the cleaning process, it is necessary to pay attention to the safety of the collision, pay attention to the water cut-off switch, avoid damage to the pipeline and appliances, and ensure the quality and safety of domestic water.

Hello dear, if the faucet is clogged and the water flow is small, you can try to clean the faucet filter or nozzle. The specific steps are as follows:1

Turn off the water source: Please turn off the water source before operation to avoid wasting water. 2.

Disassemble the faucet: Use a Hezheng wrench or pliers to remove the water faucet and remove the filter or nozzle. 3.

Wash the filter or nozzle: Place the filter or nozzle under the faucet to rinse and use a toothbrush or brush to clean the impurities and dirt on the filter or nozzle. 4.

Install the faucet: Put the cleaned filter or nozzle back in place and reinstall the faucet. 5.

Turn on the water source: Turn on the water source and check whether the water flow has returned to normal. If the above methods cannot solve the problem, it may be that there is a fault inside the faucet, and it is recommended to contact a professional maintenance personnel for inspection and repair.

When the faucet is clogged, you can use vinegar to clean it.

Prepare a container first, pour in an appropriate amount of vinegar, then put the cotton ball into the container and soak it for about five minutes, then take it out and put it at the outlet of the faucet, wait for about 15 minutes before pulling it out, and wipe the edge of it clean with a rag, and the blockage problem can be solved.

In addition, if the faucet is seriously blocked, you can remove the filter screen, use a toothpick to clean up the impurities inside, and rinse it with clean water. Then install it back as it is, and it will work normally.

What to do if the faucet is leaking

1. The most obvious impact of the faucet after loosening is the phenomenon of faucet leakage, in this case, in addition to the need to tighten the faucet to congratulate the faucet, it is also necessary to check whether the faucet has signs of aging and broken local seals.

2. The first step after finding the faucet leakage is to close the main valve of the water source in your home, and the second step is to use waterproof tape with good waterproof performance to wrap around the leakage to play a role in preventing leakage.

3. If the leakage area of the faucet is relatively large, it is best to replace the faucet with a new one, if it is not because of the damage to the hand and hail faucet and the water leakage problem, you also need to find a professional master to check the main source of the water leakage, so that you can solve the problem from the root.