What should I do if e ROUTE Airlines can t turn on, e ROUTE Airlines boot stuck on the e ROUTE Airli

Many people will have the following minor problems due to quality or handling errors after purchase.

1. System restart problem: the screen switching process is delayed and stuck; Pressing the power button cannot perform the shutdown action; If you click on the function, the execution time is too long to start.

3. Unable to locate.

4. Screen problem: the screen has no picture; The screen is difficult to read.

Solution: 1. The common way to restart the system problem: press the reset button of the fuselage with a slender object or stylus to restart the system, and then the boot screen will appear on the home screen. When the system still won't boot after resetting, you need to perform the following actions to clear the memory and restart the system.

Note: Clearing the memory will clear both the design made in the navigation software and the system. ）

1) Unplug all cables, including the power cord.

2) Manually press the power switch on the top of the fuselage.

3) Insert the SD card.

4) Wait a minute and press the power switch button again.

2. The host cannot use the files or data of the **. The file format is not right, if you say ** or updated data, the file is not a format supported by this system, even if ** is successful, it cannot be used normally. For example, the system formats supported by GPS Basic are:

If your format is not one of the above supported by this system, the data you arrive in will not be available. If the file or data that needs to be copied or stored in the SD card is not the right path, the system cannot read the multi-** function of the SD card normally.

3. Unable to locate and confirm whether the position of the GPS receiver is appropriate. Check whether the poor reception of the affected signal is caused by the thermal insulation sticker. However, GPS is not available in all places, and the reception of the signal is limited by the location.

The following locations may not receive GPS signals or may not receive the signal properly.

1) If you are located in a tunnel, under a viaduct or in a building, you may not be able to receive a satellite signal.

2) Located in the urban area, there are too many buildings or shelters, which will also affect the quality of signal reception.

3) Located in the woods, there is too much shelter, which will affect the quality of signal reception.

4. Screen problemWhen you press the power button and the system does not respond, please try to charge the GPS first; Then confirm the following 3 questions:

1) Confirm that the power of the built-in battery is sufficient;

2) Make sure the brightness of the screen backlight setting is bright enough;

3) Practical use of the device in a well-lit area;

4) Please calibrate the screen. The most important thing is to look at the brand when buying, the best ones in China are Zhongheng, Newman, etc., according to the manual provided by the manufacturer to operate, try to avoid these problems.

It may be that the battery voltage is not enough...

What's the weather like for you?

If your e-ROUTE start-up card is stuck on the e-ROUTE page, you can try the following operations to solve the problem. The first way is to try pressing the "Reset" button once and see if it can be back to normal. If that doesn't work, you can consider doing a "factory reset" operation.

Press and hold the power and volume plus keys when you turn on the phone, select "Factory Reset to Factory Settings" after entering recovery mode, and wait for the system to erase and reset all data. If it still doesn't work, it is recommended to contact after-sales customer service or go to a professional mobile phone repair shop for inspection and repair.

To send to the factory to search Qiaola for maintenance, the current Qizheng E road course does not turn on, the boot stops on the interface of the E road airline, there are more than 100 units, at least 50 machines, and now this kind of world slip problem.