mate30ProCan I still repair it if I can t get into the water? Approximate how much it costs to repai

It can be fixed. Charges are based on damaged parts. Ranging from a hundred dollars to hundreds of dollars.

The test results of the Huawei Customer Service Center shall prevail.

After the mobile phone is injected, there may be abnormal function, in order to reduce the loss, it is recommended to deal with it as follows:

1.If the phone is powered on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

2.Remove the SIM card and memory card.

3.Try to place your phone in a dry and ventilated place, and use a paper towel to blot the liquid on the surface of your phone.

4.Take your phone to a nearby Huawei customer service center for maintenance as soon as possible to avoid unnecessary losses. If you don't have a backup of your data, there may be a risk of data loss when repairing.

Notes:1Do not move or shake your phone frequently after the liquid is ingested to avoid the spread of liquid inside the phone.

2.Mobile phones are made of delicate electronic components, and there is a hidden risk after liquid ingress, so it is recommended not to try to turn them on.

3.Do not blow with a hair dryer or bake at high temperature after liquid intake, so as to avoid the liquid being blown into the inside of the phone and the high temperature damaging the phone.

When the phone falls into the water, first take out the phone as soon as possible, and remember not to turn it on directly. If the all-in-one machine can not be disassembled, it is recommended to shake the water dry, and then you can use a hair dryer to blow the phone for a while, confirm that the phone has not had a lot of water, and then put the phone into the rice, the rice will absorb the residual water in the mobile phone, and then try to turn on the phone after making sure that the phone is relatively dry, if you don't know how to operate, it is recommended to take the mobile phone repair shop for the first time.

Try not to turn on and charge. It can be blown by a hair dryer. It doesn't cost much. Master maintenance is also.

1. Drop into clean water when the power is on, this situation generally does not need to be disassembled.

1 Power off as soon as possible.

2 Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3 Place under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry.

After these three steps of processing, the power supply can basically work normally.

2. Drop into non-corrosive liquid in the case of power failure. In this case, it can be assumed that the machine is not damaged. But maybe the LCD screen will be more ugly.

1 Shake dry vigorously, but don't shake the machine off.

2 If there is no trace on the LCD screen, treat it according to Article 3 of the first point.

3 If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not.

This situation is the most troublesome. However, there is also a good chance that the machine will recover after proper treatment.

1 Power off as soon as possible.

2 If it falls into corrosive liquid (e.g. seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

3 Disassemble the machine as soon as possible. But take your time when disassembling the machine.

4 Clean with alcohol or professional washing water.

5 Assemble. Or take the whole pile of what you took apart and hand it over to the repair point. Let the repair point clean and assemble it again for you.

Hello, it depends on whether the components of the motherboard in the mobile phone are damaged by the water in your mobile phone, if it is damaged, you have to go to the after-sales maintenance of the mobile phone, you will not get it yourself!