How to clean the internal oil stain of the integrated stove?

Clean the integrated stove.

Here's how:

1. Cut off the gas valve to ensure the safety of cleaning: cut off the gas valve before starting to clean the integrated stove, and wait for the gas cooker to cool before it can be used. During the cleaning process of the integrated cooker, it is strictly forbidden to disassemble the safety device and airtight parts of the gas cooker to avoid damaging the security system and sealing system and affecting the use.

2. Cleaning of the integrated cooker and pot rack: use a soft brush to clean the surface of the base of the pot rack, the ignition needle and the thermocouple.

Flame-out protection needle dirt. Avoid using granular cleaners, cleaning balls, etc. to remove stubborn stains left on the burner, as this may damage the ignition needle and thermocouple flameout protection pin.

3. Cleaning the surface of the integrated stove: After each use of the integrated stove, use a gentle rag with an appropriate detergent to gently wipe the surface of the integrated stove, and you can wipe it as new immediately. Do not use a cleaning ball to clean the integrated cooker, which will not only cause scratches on the surface of the integrated cooker, but also damage the performance of the integrated cooker.

4. Cleaning of the flue of the integrated stove: To clean the flue of the integrated stove, use appropriate degreasing agent to clean it. Start the low gear first, then spray the degreaser to suck it into the fume channel, and the dirt will be dissolved by the inhaled degreaser, decompose and flow into the external oil tank underneath.

For more information about integrated stoves, it is recommended to choose Nature Home. The Wellman integrated stove under Nature Home Furnishing adopts an integrated design, which saves space and is more beautiful, and the functions of the smoke machine, stove and motor are linked, and the operation is handy; All-in-one configuration, integrated range hood.

Stoves, sterilizers, steam ovens, etc., save space and are also more energy-saving, low-consumption and environmentally friendly. Constant temperature storage gimbal, super large and ultra-wide thermal insulation storage platform, seasoning is easy to take, up to.

The heating temperature is 70°, and the dishes do not need to be returned to the pot for long-term heat preservation, and the nutrients are not lost.

Hello, friend.

The grease inside the integrated stove can be sprayed directly to the smoking port with neutral detergent, the smoke opener runs in low speed for 2 minutes, wait for 5 minutes, and then replace the detergent with clean water and repeat the above steps to rinse the oil stain.

Because the integrated stove is a side-suction lower discharge structure, the detergent can be smoothed from top to bottom to the oil collection box, and then the oil and cleaning are on the line, the effect is still very good, thank you.

Hello, I am glad to answer for you, the grease of the hood of the integrated stove is mainly concentrated in the smoke baffle, oil net, and turbine. Easy to disassemble design, can easily remove the smoke shield and oil mesh cleaning, the unique coating set to accompany the tomb, as long as the rag dipped in warm water dissolved in neutral detergent to scrub the surface, repentance and rinse with water, you can easily remove the oil stain in front of the reed. For the grease inside the integrated stove, you can spray neutral detergent directly to the smoking port, run the smoke opener in low speed for 2 minutes, wait for 5 minutes, and then replace the detergent with clean water and repeat the above steps to rinse the oil stain.

Integrated stove is one of the common forms of stove in modern kitchens, which are loved by consumers because of their beautiful appearance and easy cleaning. However, after the integrated stove is used for a long time, a large amount of oil stains will often accumulate, which will affect its use effect and appearance. The following will introduce you to several ways to clean up the oil stain of the integrated stove.

1.Use specialist cleaner.

There are a number of professional integrated stove cleaners on the market that can quickly and effectively remove oily stains and stains. To use, wipe the surface of the cooktop clean, then pour in an appropriate amount of detergent spray and apply it evenly to the surface of the cooktop. After waiting for a while, wipe the dry pants with a damp cloth.

2.Use vinegar.

Vinegar is a very commonly used cleaning agent that can quickly remove oil from the surface of the integrated stove fiber. When using, mix an appropriate amount of vinegar and water, dip the liquid with a rag, and then evenly apply it to the surface of the stove. Wait a while and wipe it clean with a damp cloth.

3.Use dish soap.

Dish soap is also a common detergent that can easily remove oil and stains. Pour an appropriate amount of dish soap into the basin, add water and stir well, soak the rag into the solution, and then wipe it on the surface of the stove. Wait for a while and then wipe clean with water.

4.Use baking soda.

Baking soda is very effective in removing grease and dirt and can be used to remove grease from the surface of the integrated cooktop. Mix an appropriate amount of baking soda and water to form a paste-like substance, spread evenly on the surface of the stove, wait a while, and then wipe it off with a damp rag.

In short, there are various ways to clean up the oil stains of the integrated cooker, and choosing a suitable cleaning method can not only keep the surface of the integrated cooker clean, but also make it durable and prolong its service life.

The integrated stove is a common household appliance in modern kitchens, which is not only convenient and practical, but also can effectively save kitchen space. However, after using the integrated stove for a long time, oil smoke and oil stains will accumulate on it, which will affect its normal use and aesthetics. Below, I will explain how to deal with oil stains on integrated stoves.

1.Use a special detergent chamber solution.

There are many cleaners on the market that are specifically designed for integrated stoves, so you need to read the instructions carefully before using them and follow the instructions. These cleaners are effective in removing oil and fumes and protecting the integrated cooktop surface from damage.

2.Homemade detergent.

Homemade cleaners can effectively remove oil from integrated stoves and are inexpensive. You can mix baking soda and white vinegar to make a detergent, spray the mixture evenly on the surface of the integrated stove, scrub it evenly with a brush, and then wipe it off with a damp cloth.

3.Bring boiling water to clean.

Bringing a pot of water to a boil and then slowly pouring the whole pot of water onto the integrated stove can effectively soften the oil stains and make it easy to wipe. In the process of adding water, note that this circle simply does not pour water into the control panel, socket and other parts to avoid damage to the electrical appliances.

4.Clean frequently.

Clean the integrated stove frequently and remove grease and stains after each use. This prevents oil and stains from accumulating on it, which not only affects the aesthetics, but also the service life of the integrated cooktop.

In short, the correct disposal of grease stains on the integrated stove can ensure smooth use and a long service life, as well as maintain a good kitchen hygiene.

1. The gas valve must be cut off before cleaning and integrating the environmental protection stove, and the gas stove has been cooled. During the cleaning process, it is strictly forbidden to disassemble the safety device and airtight parts of the gas cooker to avoid damaging the security system and sealing system of the integrated cooker and affecting the use of the integrated cooker.

2. Clean the pot rack of the integrated stove: use a soft brush to remove the dirt on the surface of the burner base, the ignition needle and the surface of the thermocouple protection needle. Avoid using granular cleaners (detergents), steel wool or knives to remove stubborn stains left on the burner, as this may damage the ignition needle and thermocouple flameout protection pin, resulting in a malfunction of the safety device of the integrated eco-hob or wear and tear on the surface of the components, which will directly affect the service life of the integrated hob.

3. Clean the surface of the integrated stove: after using the integrated stove every day, wipe the cooktop clean, and use neutral detergent to clean the panel, cover and cavity of the integrated stove to prevent a large amount of oil from accumulating on the surface of the integrated stove, which is difficult to clean after a long time. If it is difficult to wipe off the stubborn oil stain on the cooktop for a long time, you can use 50g of baking soda to press it into powder, sprinkle it on the cooktop, and then wipe it with a rag, or you can use coarse salt, so that it is easy to clean up the dirt on the stainless steel and glass cooktop, but then you have to clean it up, otherwise the stainless steel cooktop will be blackened.

4. Clean the smoke duct: dirt is easy to produce on the surface of the smoke duct, so it is necessary to use a suitable degreaser to remove the dirt. When cleaning, start the low speed of the range hood first, and then spray the degreaser to make it suck into the oil smoke channel, and the dirt is broken down by the degreaser and flows into the oil tray.

5. Clean the fire hole of the burner fire cover: In the process of use, if you find that the flame is uneven or there is no flame in the individual fire hole, it must be the situation that the fire cover is blocked. In such a situation, it is necessary to dredge and clean the fire hole of the fire cover in time.

After the burner is cooled, remove the fire cover in time and use a steel needle to remove the dirt and carbon deposits in the fire hole. Do not rinse the fire lid directly with water (as blisters can temporarily block the fire hole) and do not wipe the burner surface with a hard object, as this will cause irreparable damage to the black surface enamel.

6. Clean the inside of the integrated stove disinfection cabinet: wipe the stagnant water on the chassis and the dirt on the food rack in time, and maintain the disinfection cabinet regularly.

7. Generally every 1 to 3 months, clean up appropriately, when cleaning, pay attention to press and hold the oil box panel with your fingers, push it to the end, and then slowly let go, the oil collection box slowly pops out, be careful because the oil tank is too full of overflow.

Like the previous integrated stove to clean the interior must be disassembled, the current integrated stove has a one-key cleaning function, like our home integrated stove is this function, the interior can also be cleaned clean

Before cleaning the integrated stove, the valve should be closed, and the safety device and airtight parts of the integrated stove should not be disassembled, nor should it be dismantled with water to make a flushing fire cover. Choose a soft cloth and a mild detergent to wipe down the cooktop and other oily orange squares. The oil cartridge should be cleaned regularly, and the waste oil should be avoided when removed, and it is recommended to pour the waste oil into the garbage bag and seal it before throwing it into the garbage bin.

Balance. <>

The integrated stove is a common kitchenware in Fengyin kitchen, which can provide a variety of functions such as a stove, gas stove, and range hood at the same time. As a common kitchenware in the kitchen, the cleaning of the integrated stove is very important. The following is an introduction to the treatment of the integrated stove after cleaning.

1.After cleaning the integrated stove, the stove should be wiped clean and kept dry to avoid rust and damage to the stove caused by long-term moisture.

2.The smoke exhaust pipes in the integrated stove should be kept unobstructed and should be cleaned and dredged regularly to keep them in normal working condition.

3.Do not use too strong detergents during the cleaning of the integrated cooktop, so as not to damage the surface of the cooktop.

4.After cleaning the integrated stove, the cleaning utensils should be thoroughly cleaned, and the surface of the cooktop and cooktop should be wiped clean to prevent detergent residue.

5.If the surface of the integrated stove is scratched or worn, consider treating it with a professional repair tool.

6.Regular maintenance of the integrated cooker, such as replacing the parts of the gas cooker and cleaning the smoke exhaust pipe, can prolong the service life of the integrated cooker and maintain the performance of the cooker.

In general, it is necessary to pay attention to the above points after cleaning the integrated stove, and we should also pay attention to maintenance and maintenance in the process of daily use, so as to make the integrated stove have a more perfect use effect.