How can the dirt on the surface of the tile be removed, and how to remove the dirt on the tile?

1.Floor tile cleaner.

There are products in the market that specialize in selling tile cleaners, which are also very helpful for cleaning bathroom floor tiles. And this bathroom floor tile cleaning method is also one of the most commonly used methods by people.

2.Wipe with a dry cloth.

No matter what kind of bathroom tiles, you must master some specific bathroom tile cleaning methods, for general stains, wiping with a rag is much better than wiping with a damp cloth. Wet cloth wiping will leave some stains on some tiles, but if you wipe them with a dry cloth, they will get brighter and brighter. Therefore, different tiles are cleaned with different bathroom tiles, and the effect will often be doubled.

For stains such as ink, beer, coffee, etc., you may wish to wash them with laundry detergent or dish soap, and then wipe them with a dry cloth.

3.Mop wipe.

For added convenience, you can also use a clean mop for bathroom tile cleaning. In fact, when buying and choosing tiles, professional brand tiles are often equipped with special cleaners, if you want to use a mop to wipe, first of all, you must determine whether the mop has wiped the waxed floor, if so, you must not use it for bathroom tile cleaning, because dirt or stains, once stained with wax, it will be difficult to remove, otherwise it will be treated with professional cleaners.

4.Stain remover.

If there are stains in the bathroom, either rust, scale, soap stains, and black scale, for this kind of bathroom tile cleaning method, you can use a special stain removal paste.

Wipe with a soft cloth and Clean.

To remove dirt from the tiles, you need to prepare: a small bowl, sandpaper, white vinegar, salt, and a drinking glass.

1. First pour an appropriate amount of salt into a water cup, as shown in the figure below.

3. Next, mix the white vinegar and salt into a small bowl at a ratio of 2:1, as shown in the figure below.

4. Then heat the small bowl and boil the contents into a paste, as shown in the figure below.

6. Next, you can wipe off the dirt on the tiles with sandpaper as shown in the figure below.

7. Finally, you can see that the dirt on the tile is cleared, as shown in the figure below.

How do you remove stains from tiles?

1. Use dish soap, soap and water for daily cleaning.

2. Clean the tiles with a mixture of soapy water and a little ammonia and turpentine, which can make the tiles cleaner and brighter.

3. If there are tea, coffee, beer, ice cream, grease and other pollutants attached to the surface of the tile, it should be scrubbed in time, and sodium hydroxide or potassium bicarbonate solution can be used to decontaminate if necessary. Ink, cement and other pollutants can use diluted solutions of hydrochloric acid and nitric acid, while paints, coatings and other pollutants can use special cleaning agents.

4. If there are a few slight scratches on the brick surface, you can apply toothpaste to the scratches and wipe them vigorously with a soft dry cloth to repair them. If the damage is serious, it should be replaced in time or repaired by professionals to avoid personal injury.

5. Polished tiles should be waxed regularly, and it is advisable to wax once every 2 or 3 months. The gaps between the bricks can be cleaned with stain remover from time to time, and then brush a layer of waterproofing agent on the gaps with a brush to prevent mold growth.

Skillfully remove tile stains:

Will. Clean the toilet. Or. Hydrochloric acid.

20% slowly pour into 80% water to dilute. Soak to scrub stains. (Be careful to pour slowly to avoid burns**).

Use. Hydrogen peroxide.

20% and diluted with 80% water. Soak to scrub stains.

It is recommended that the ground be waxed once every six months, which will have a better anti-fouling effect.

Skillfully remove marble stains:Marble is a kind of stone with strong water permeability, so any stain is stained with the faster the cleaning effect is better, first cover the stain with salt, wipe it repeatedly with a soft cloth, let the salt fully penetrate into the inside of the stain, for stubborn stains, you can use a mixture of hydrogen peroxide and four parts of water to wipe the required parts, for general stains, you can use general soap to clean, rinse with water and then dry with a dry towel. You can also use a special marble polish wax regularly to keep your countertops shiny and new.

Skillfully remove granite stains:Granite needs to be repaired frequently because it is porous and requires a non-permanent surface sealant to prevent stains. Granite is difficult to clean, and it is not easy to keep small cracks and pits on the surface free of mold and bacteria.

Mix the cola with baking soda and vinegar and rub it with a brush.

1. Daily tile cleaning can be done with detergent and soap.

2. Add a certain amount of ammonia to soapy water, and add a little turpentine, a solution mixed together with these three substances, used to clean tiles, and the luster of porcelain bucket bricks will be brighter.

3. If the tile is stained with oil stains, rust and soap stains, it can be cleaned with multi-functional stain remover. Especially in the gap between the ceramic tiles and the ceramic tiles, it is particularly easy to get stained and very difficult to remove, you can first use a stain remover to remove the dirt, and then brush a layer of waterproofing agent to avoid the growth of mold.

4. If the stains on the tiles are caused by coffee, beer, tea, ice cream, etc., they should be removed with sodium hydroxide or potassium bicarbonate solution.

5. If the stain on the tile is caused by ink and cement, remove it with dilute solutions such as hydrochloric acid and nitric acid.

In addition, if it is a polished brick, it should be waxed regularly, generally once every 2-3 months. If there are scratches on the tiles, you can choose to apply the marks with toothpaste, and then wipe them clean with a dry rag, and the scratches will disappear.