What should I do if the software doesn t respond after the computer is turned on?

After a while, refresh it, or it's broken, and the professional needs to re-establish the account.

It's been a long time, it's probably stuck, and I won't get it, so I should take it to the repair shop to let the master see if there's a problem.

The computer has been used for a long time, and it is inevitable that various problems will occur, and my computer will strike a few days ago. It's strange to say.,The day before it was normal.,It's all normal shutdown operation.,And today there is no response when you turn it on again.。 At first, I thought the monitor was broken, and it didn't respond to the external connection of the TV, so I ruled out a piece of hardware.

So since it's not a monitor, it must be the reason for the main computer case.

If the monitor is broken, the problem will be found at once, but if the main chassis is broken, it will be difficult to judge. It just so happened that a friend of mine would repair the computer, so I quickly dialed ** to consult how to solve it. After connecting there, he only asked a few words briefly, and then asked me to try it according to his method.

Sure enough, this problem was solved very simply, so I also shared it with you, and you can also judge if you encounter the same problem.

There are two kinds of computer chassis that do not respond when they turn on, one is that the power supply is not powered on, and the other is that the power display does not respond when they are turned on. If the power is not turned on, the first thing to think about is whether the power cord is loose or damaged, and you can replace it to eliminate it. Most of the reasons for not powering on are that the power supply is broken, and of course, the possibility of the motherboard, or the failure of the case boot buttons, resulting in the failure to power on.

The power light on the main chassis is on after my computer is turned on, so the hardware mentioned above is excluded, and it was also used normally the day before, and there is no problem of key failure. In fact, it is still a very common problem to turn on the power on and not respond, most of the reasons are that it has been used for a long time, and there is dust in the chassis, resulting in poor hardware contact in the slot.

If there is a lot of dust, which hardware will be affected and will not be able to turn on? Here are two places to find why. The first is the memory module, if there is a buzzer on the motherboard of your computer, you will hear a tick alarm sound after turning on the power, and it is easy to judge the cause of the memory module.

Most of them are due to poor contact of memory modules, so the computer does not detect the presence of hardware, resulting in no response to boot. In this case, you can simply unplug the memory module, wipe the metal contacts, and install it again.

There is also a possibility that the discrete graphics card is in poor contact, which is the same as the principle of the memory module, and the processing method is also the same. It should be noted here that when plugging and unplugging memory modules or graphics cards, it must be done in a power-off state. Secondly, it is better to use an eraser to wipe the metal contacts, and not only to wipe the contacts, but also to use a brush or hair dryer to deal with the dust in the motherboard slot.

My computer's problem is with the memory module, because my computer itself has an onboard graphics card, which is an integrated graphics card. I wiped the metal contacts of the memory module, then turned to cold air mode with a hair dryer and dusted the memory slot. After installing it again, I clicked the power on button, and I saw a picture of normal boot on the monitor screen.

The computer clicks on the icon and the software does not respond, which is generally caused by the processHere's how to solve it.

2. Then in the running window that opens, enter cmd to open the cmd command box.

3. If the above operation cannot open the cmd command box, you can use the win + r shortcut keys on the keyboard to open it. Enter the following command: taskkill f im ; End the shutdown of this process.

4. Then re-enable this process, and solve the problem by entering the command: start, as shown in the figure below.

<> the computer does not open the software and does not respond, it is caused by system instability or software failure.

Solution 1:

1. Press Win+R to open and run, enter cmd, and press enter;

2. Enter the administrator command window, enter, enter;

3. Return to the desktop, and you can open the desktop icon.

Solution 2:

1. Find and open the Windows system folder in the start menu, right-click on the "Command Prompt" and select Run as administrator.

2. Press enter to confirm, and finally restart the computer!

Other reasons why the software cannot be opened:

1. The software itself is a problem: the software installation package is incomplete, or the system is not compatible, administrator permission is required, you can try a different version.

2. Computer environment problems: many software requires the computer itself to have a certain configuration environment, it is recommended to go to the official website of the software to check the installation conditions, if it does not meet the requirements, then follow the prompts to change the configuration of the computer.

3. The registry is not cleaned up after some software is uninstalled, which will affect the second installation. It is recommended to clean the registry thoroughly, clean the registry, and then go to the official website to **software,Then**open it after completion,It should be able to open at this time。

The computer cannot open the software and does not respond, which is usually caused by system instability or software failure. Press win+r to open the run, enter cmd, press enter, enter the administrator command window, enter, enter, exit the page, and you can open the desktop icon.

1. The computer program is opened too much, resulting in an increased burden on the processor, causing a reaction, in this case, we can check the proportion of CPU usage in the task manager to view, if it is more than 90%, then it is likely that the processor can not run, resulting in a general wait will be good. 2. Another reason for the computer program to be unresponsive may be program problems, such as the program due to the virus, causing the computer to run the program into a dead loop, then the computer will definitely be unresponsive, the most obvious symptom of this problem is that the computer does not respond when a program is opened many times, the solution is to uninstall the program and reinstall it 3, the reason why the engine computer program does not respond is that there is a problem with the network speed, when the computer network speed is problematic, the running program is related to the network, such as browsing dynamic web pages, Due to the poor network, the data signal is unstable, resulting in unstable data transmission, and the computer has been accepting requests like the network, but the signal obtained is slow, causing the computer to have no response. Solution; Increase your computer's internet speed.

Ask a question, the task manager is also stuck!

The mouse is movable.

It may be necessary to reinstall the system.

Is it because one program icon won't open or all the application icons won't open? This problem determines the solution to the failure, if a program can't be opened, the most serious outcome is to reinstall the software, here note that the worst outcome.

The software of the computer cannot be opened, the office software cannot be opened, and the successful solution is shared.

It should be the memory problem of the system disk, if the system disk has no free memory, it is impossible to open the softwareHere's how to solve it.

1. First of all, in the computer desktop, click "This Computer", as shown in the figure below.

2. Then check whether the system disk [C drive] is full. If the reading bar of the [C drive] is already red and is close to being full, it is necessary to clean the [C drive].

3. At this time, right-click the system disk and click Properties. You'll be taken to such an interface. It can be seen that the space of system disk 2 and 3 is gone. Click the [Disk Cleanup] option under [C drive: Properties panel].

4. Wait for a few minutes, after the scan is complete, you can select the items you want to clean. Nothing that comes out of the scan is built-in to the system, and after the cleaning is complete, the software can be opened.

The computer software cannot be opened, mostly because of the exe file association error.

Solution 1:

1. Double-click to open the "Computer" icon on the desktop, click "Tools" in the menu bar, and click "Folder Options" in the pop-up shortcut menu.

2. Switch to the "View" tab, remove the "Hide Protected OS Files (Recommended)" checkbox in the advanced settings list box, and select "Show all files and folders", and click the "OK" button after the settings are completed.

3. Then go to the root directory of each disk to see if there is a "hidden file, if there is, then right-click to delete."

4. Click "Start", enter "Command Prompt" and open it.

5. Type "Command" in the open command prompt window and press the Enter key to restore the association of the exe file.

Hello, what is the specific situation, can you take a screenshot to see?

Questions. <>

There's a virus in your computer, and the icons aren't shortcuts.

It's all opened with a browser.

Questions. <>

There's a fix desktop app in there, or it's time to reinstall the system.

Questions. How to reinstall the system, do you have to reinstall the above software?

The installation system needs to be reinstalled and reinstalled.

The system installation can be installed there by the maintenance computer, and it is a bit troublesome to install it yourself without a foundation.

Questions. QQ can't be logged in, and can't be controlled remotely.