Tools on how to prevent ADSL timeouts

Pacific Software.

ADSL Super Wireline Timing Software.

This software has the unique function of timing Enternet 300 and Enternet 500. Unique Internet classification function. It has the functions of ADSL, ISDN and dial-up Internet timing.

Provide a detailed record of daily surfing. Internet access records can be stored for up to one year. Automatic dialing and hanging up of connections.

Monthly time-limited internet access. You can sort the records. You can calculate the total time for the selected record.

600 yuan is only 800 hours??? 800 hours is equivalent to a few days a month.

It's not a good deal, isn't it?

The cap of 1200 yuan is, of course, that after you exceed 800 hours, you may start to charge according to the time, and when the excess time should be charged to 1200 yuan, no matter how you go up, you don't have to pay again.

We have 600 pieces of bags here for 14 months.

After the cap of 1200 yuan, you can continue to surf the Internet but do not charge money, that is, no matter how long you go on, you will only charge 1200 yuan, and the network will not be interrupted.

After the timeout of the subscription hour, you will not be able to access the Internet.

More than 800 hours will be counted separately.

The cap of 1200 yuan is regardless of time, and it is on casually.

Hello! Solving your requirements is very simple. In your router's settings, select "Connect on Demand" for broadband connections. The disconnection time is set to 60 seconds. Then save the settings.

When the router restarts, you give it a try.

Hope that solves your problem.

Good luck! If you have to "manually", I can only advise you to unplug the router or the cat. Remind you that such a device is constantly switching on and off the power supply, and the life will be drastically shortened.

I see what you mean. If you want to disconnect the network "manually", you can only use a few ways you say.

1. Either you don't connect the router.

2. Either you connect your cat to the LAN port of your router and continue to use dial-up to surf the Internet. But I warn you, you won't be able to access both computers at the same time.

You can set up automatic connection, taking TPLink WR886N as an example, the following methods are used:

1. Open the browser, enter the router IP address, press Enter, default is;

2. Enter the router password, click to log in, the default is admin;

3. Click Network Parameters - WAN Port Setting;

4. Click Auto Connect on the right side, it will be automatically connected after booting and disconnection, and click Save.

Directly turning off the cat's switch button is the most effective and does not harm the hardware of the router, the power of the router and the cat is turned on normally, and the line connection is normal, it has been in the dial-up state, and it is not very useful when the operator server is still accounting.

Open the router settings interface, set the connection mode to on-demand connection in the WAN port settings, and set how many minutes to wait for no data transmission to automatically disconnect.

Then you can select "Connect Manually" and then save the exit. In this way, only when you log in to the router management interface and click the "Connect" button will dial up to access the network, and when you log out, you can also enter the management interface and click "Disconnect", which is more troublesome, but you can click to save the password when entering the route management interface, which is slightly more convenient.

Generally, your ** expenses are averaged out.

For example, you have a monthly subscription of 120

The cost should be 120 30 24, so it will be the cost per hour, at most a little more.

For details, please ask the telecom customer service.

Dear Telecom users, Hello!

According to your description, due to the different business acceptance procedures and tariffs in different cities, it is recommended that you can contact the customer service of the 10000 telecom company where the number belongs or go to the local business hall for on-site consultation. Hope it helps.

If you need to buy a machine, you can go to Anhui Telecom Tianyi store (hundreds of mobile phones are low on the whole network.

Hello, you can directly link the network cable to the computer.

Dial-up can go online normally is a problem with your router settings.

Could it be that there is a problem with your connection, I am the computer to the telecom line.

None of the best ways to restore the system are available.

What people are asking is like being brain-dead, and it turns out that it doesn't work for people.

Log in to the online business hall to inquire.

You can see the time spent online.

Someone steals your net, changes a complex password, and reinstalls the system.