The decoration and installation of the new house The anti theft door has not been installed, can it

Do the math how much it will cost you to renovate your home

It can be removed and reinstalled, but it will be a little more troublesome. Once it is found that the security door is not installed, it is necessary to disassemble and reinstall the work as soon as possible, so that the mortar on the security door is not completely solidified, and the disassembly work will be easier, and wait until the concrete is completely solidified, which will increase the difficulty of construction. On the other hand, the door is not installed, but it will not affect the later use and overall aesthetic effect, so there is no need to reinstall it.

In order to avoid unnecessary trouble, the installation of security doors needs to do the following:

1. The installation time needs to be disassembled and installed before the tile is completed. When the security door is removed, it will inevitably cause damage to the wall, and the wall can be repaired and leveled after the tile is completed.

2. Before installing the anti-theft door, check whether the surface of the anti-theft door is intact and whether the accessories are complete. The surface of the security door purchased on the market may be damaged during the transportation process due to long delivery time and improper packaging. Therefore, when you receive the goods, you must open the carton to inspect the goods, and then install it after confirming that there is no problem.

3. After checking the quality of the anti-theft door, install the anti-theft door. If the size of the security door does not match, the wall should be cut first, and then the construction should be carried out. In addition, during installation, it is necessary to pay attention to the fixed state of the anti-theft door and the wall, which is directly related to the safety of later use.

Enter the area and get the decoration for free**].

Enter the area and get the decoration for free**].

OK.

It can be reinstalled once, if the amplitude of the inclination is not very large, first loosen the expansion tube, and then do a fine adjustment. If the gap is relatively large, it is necessary to put the expansion bolt.

Remove it with a tool, then punch a hole, and finally reinstall the security door.

Tips for installing security doors:

1. First of all, you need to measure the size of the door frame, and then choose the corresponding size of the anti-theft door. When installing the door, there must be no gap between the wall and the door frame, otherwise it will not be stable and will collapse after a long time.

2. Fix the door frame on the wall with a punching machine, and then put the anti-theft door at the position of the hole.

3. Then use a socket wrench.

Secure the expansion bolt and tighten the nut.

4. Next, use cement or glue to fill the gap between the door frame and the wall, and then install the lock of the anti-theft door. At the same time, it should be noted that the size of the door frame and the size of the security door must be measured first.

It can be replaced, but the work is more cumbersome. After the decoration is over, it is also possible to change the anti-theft door, you can directly buy a new anti-theft door, and then there will be a special master to install it, and after the installation, you can use it normally. When installing the anti-theft door, it is mainly to have the corresponding installation tools, and to ensure that the installed anti-theft door is very firm, so as to play a very good anti-theft role.

Now there are indeed a lot of brands of anti-theft doors on the market, and we still have to choose well-known brands of anti-theft doors when buying, so that the quality is relatively high, and the cost performance is also very high.

Summary. Yes, this situation requires some changes to the wall, because the door is fixed, and the wall needs to be slightly changed according to the size of the door.

Hello, this question will be answered by Xiaodi's answerer, it will take about five minutes to help you sort out the reply, please wait, thank you.

Hello, I am happy to answer your question, about your question, the anti-theft door can be removed and reinstalled, as long as you pay attention to the corresponding protection of the wall and door in the process of demolition, you can reinstall it. I hope mine can help you, I wish you a happy life, thank you. 

Does it affect if I reinstall?

If there is no impact, just pay attention to the appearance of the protective door.

What is the reason why the edge of the door sleeve and the wall are not next to each other? Is it the reason why the door cover is smaller?

There is a centimeter distance between the edge of the door sleeve and the wall, can it be dismantled and reinstalled?

Yes, this situation requires some changes to the wall, because the door is fixed, and the wall needs to be slightly changed according to the size of the door.

Installation of the dismantling. The installation time should be selected before the bricklayer is completed, because the previous installation bricklayer and mason can be well repaired and calmed. The installed anti-theft door will have a protective film, and you can also add another layer of protection by yourself, if it is not a human collision, it will not cause damage.

The door frame of the anti-theft door should be tightly connected with the wall, and filled with expansion glue or cement or other fillers, if the gap is too large, it is best to use additional steel bars. If the door opening is not square or the size does not match the security door, the wall should be chiseled first. If the security door is installed before the ground is treated, be sure to ask the worker what is the height of the ground after treatment, so as not to cause the ground to be too high during installation.

The anti-theft level of the anti-theft door is divided into: A, B, C, D four levels. Generally, household security doors are mainly C, D, the higher the level, the higher the anti-theft performance.

Of course, it is installed and dismantled, if you have to do everything yourself, then it is not exhausting to death Answer supplement It is best to make it clear to the seller of the security door when you buy it, you just say that I now have an old one, you are responsible for dismantling it or not, and if you are not responsible for dismantling it, I will go to another house to buy, and the merchant will agree.

When you buy a new door, you can tell the people there to say yes, and it's usually the people who press the door to open it.

In general, it is the person who installs the demolition.