-
The installation of the gate is very important, if it is not installed well, it is nothing more than a lot of effort, but it is necessary to remove it and reinstall it.
Judging from the situation you reflected, the mortar has been poured for three days, which is basically condensation, but this is also a matter of no way, if you delay for a month or two because of this matter, the condensation will be stronger, but when you are uncomfortable because of the installation of the door, you still have to disassemble and reinstall, it will be more difficult.
Of course, there is another situation that can not be dismantled, that is, the installation of the problem is not big, does not affect the appearance or does not affect the use, in this case you feel that it can be dismantled or not, then you have to combine the cost of reinstallation, demolition may cause damage to the door and other factors to actually consider comprehensively.
-
Since it has not been installed, although it is said that the mortar has been filled, it should also be removed again and installed from scratch, after all, this is the gate, this is a guarantee of safety, and there can be no sloppiness.
-
Yes, the mortar may not be completely solidified for only three days, at this time it is relatively easy to remove and rework, first remove the mortar, then remove the gate, re-measure the size, calibrate the installation size, fix the position of the gate, pour the mortar, and wait for solidification.
-
Since it is not installed, it can be removed and reinstalled.
-
The embedded parts are filled with mortar, and when they are removed, they have to be re-chiseled and re-poured after the mortar is removed.
-
Anti-theft door pouring cement method:
1. Open the holes on both sides of the door first, and pour the cement mortar from both sides of the door, which can make the anti-theft door more firm. 2. Because the merchants will punch expansion nails on the side of the door during installation, if the cement slurry cannot flow in, the cement mortar can be stirred up with strip steel bars or wood to leave it at the bottom of the door.
3. The cavity is too large, and there are common things on the seams after the door is installed, and the joints are plugged tightly with local materials when the cement mortar is poured into to prevent the cement mortar from flowing out.
4. When the poured cement mortar is left to the bottom hole of the door frame, the hole can be temporarily sealed so that the mortar can continue to be filled. The inside of the security door should also be filled with cement slurry until it is full, so that the door is more strong.
5. When installing the anti-theft security door, it should be straightened and hung upright, and the wooden wedge should be used to temporarily fix it after the size is appropriate, and adjust and correct.
6. The door frame of some anti-theft security doors needs to be filled with cement in the frame to improve the anti-prying effect of the anti-theft door.
7. The push-pull anti-theft door should be flexible after installation; The swing door should be easy to open and close tightly and firmly.
8. The handles, door locks, observation holes and other hardware accessories of the anti-theft door must be complete; The multi-functional anti-theft door on the password lock, electronic password alarm system, doorbell paging and other devices must be effective and perfect.
-
When the door is installed, it is considered firm, there are expansion screws fixed inside, and the tank is in the cement slurry, if you disassemble it now, the door frame will definitely be damaged, or it will not be removed - unless the wall on the left and right sides of the door and above is smashed, but this is impossible. Therefore, it is not necessary to consider that the door frame can still be intact, and the door frame must be cut several times with a cutting machine, so as to avoid damage to the wall next to it.
-
Buy a larger expansion nail and replace it with a stable stuck.
-
Find a security door repair point to repair it.
-
The anti-theft door grouting is cement-filled.
The role of anti-theft door grouting:
1. If the anti-theft door is not grouted, the sound of closing the door will be very brittle, and the bolts will be loose. The door frame will be tilted and deformed. The bearing force of the door frame is reduced, and the anti-theft performance is reduced.
2. The grouting of the anti-theft door can effectively combine the door frame with the door body. Improved anti-theft performance. On the other hand, the door and the door body maintain a reasonable fit, and the long-term use will not change.
-
If you install it in your own home, you must choose cement If you have a small gap in styrofoam, you can use it If it is large, it will definitely not work No, you can order a non-standard door, so how good It is to do it according to the size of your hole You don't need to fill anything Besides, Panpan's door is notoriously expensive There is no need to spend money in vain.
-
The anti-theft doors are filled with cement slurry, so that the door frame will be more stable, and the foaming agent is generally used for interior doors.
-
I am a decoration material, if the seam is relatively large or easy to construct, I recommend using cement.
-
Decoration method. For this aspect, it is recommended that you choose a large company like Tianjin Xingyi Decoration, which is guaranteed.
2. Choose half a package or a full package according to your personal time.
A company like Tianjin Xingyi Decoration can improve the quality of design, construction, and materials. As for whether to choose half a package or a full package, if you have time to supervise the work, it is recommended to choose half a package, so that the tiles, floors, wooden doors, wardrobes and cabinet lamps are more selective, and the quality of the project can be guaranteed; If time does not allow, all-inclusive is also possible, worry-free.
3. Design style.
As for the design style of decoration, it is recommended to be concise and atmospheric, which can be determined according to personal preferences and specific budgets, if the budget is limited, choose a simpler Nordic, modern, etc., if the budget is sufficient, you can consider the relatively complex process of new Chinese, European, French and so on.
4. Decoration materials.
After choosing a decoration company such as Tianjin Xingyi Decoration, the construction is generally a standard process, do not worry too much, focus on the selection of decoration materials, if conditions permit, try to choose environmentally friendly and safe decoration materials, especially for families with children and the elderly, health and environmental protection are particularly important.
Finally, in fact, in the final analysis, the most critical thing is design, construction and materials, every detail is in place, home decoration can ensure quality and effect, I hope the above can help you!
-
To put it simply, renovation is divided into the following steps:
1. Preliminary design; 2. Demolition and alteration of the main body; 3. Hydropower transformation; 4. Carpentry; 5. tiling; 6. Brush wall paint; 7. a kitchen and bathroom ceiling; 8. Cabinet installation; 9. Wooden door installation; 10. Floor installation; 11. paving wallpaper; 12. radiator installation; 13. Switch and socket installation; 14. Lamp installation; 15. Hardware sanitary ware installation; 16. a curtain rod is installed; 17. Pioneer cleaning; 18. Furniture entry; 19. Household appliance installation; 20. Home accessories decoration. Roughly follow these 20 steps.
Try to wring out the mop before use, before cleaning should be used to vacuum the dust and so on, to avoid sand scratching the surface, after cleaning you need to wait for the surface to dry before waxing, to dry the wax to wipe along the wood grain. Find the installation position of the skirting on the wall along the bulging floor, pry the skirting apart, see if the expansion joint has been attached to the wall, and re-lay the warping part. Mop the floor with a wet mop every day to increase the humidity of the floor, no need to shake it too dry, no dripping, put some 84 disinfectant in the mop water, don't worry about dampness and mold. >>>More
Generally, air conditioning dealers have their own installation team, and when the factory gives it to the dealer, it shows who is responsible for the installation, so the installer of Suning Electric is also considered the installer of Haier. You must not find someone to install and relocate the machine yourself, otherwise the factory will not be responsible for the three guarantees, I hope to help you.
Tool materials required: electric fan, screwdriver.
1. Disassemble the express and place the parts neatly. >>>More
Oh, big brother, if you really want to pretend to be vista, you can re-divide the area! Because you can't even do 10g at all! Because the version you're going to install is huge. >>>More
Tell me what kind of Shenma plane you are flying on? (Asking these questions later is troublesome to make it clear). >>>More