What to do if the faucet drips repair steps for the faucet

Water leakage is a problem that every family can encounter. If it is not solved in time, it will not only waste water resources, but once it is discovered in time, the consequences will be unimaginable.

Faucet repair method: The first thing to do is to turn off the water supply. You can turn off the water supply by turning off one of the water valves near the faucet, but if every faucet is not fitted with a water valve, you will need to turn off the main water valve to turn off all the water in your home.

1.There is no water leak at the hose outlet: this occurs when the axial gasket in the faucet is worn out.

Solution: According to the size of the faucet, select the corresponding pliers to unscrew the faucet gland, take out the worn axial gasket with a clip, and then replace the new auxiliary gasket to solve the problem.

2.Leakage at the connection of the faucet connecting pipe: Check whether the nut of the lower connecting pipe is loose. Solution: Tighten the nut or replace it with a new U-washer.

3.The reason for the leakage in the gap under the faucet: it is caused by the wear of the triangular gasket in the gland. You can loosen the screws first, remove the bolt head, then loosen the gland, remove it, and then take out the triangular sealing shop inside the gland and replace it with a new one.

If the faucet at home has been used for a long time, it is inevitable that there will be dripping. The sound of ticking makes a lot of people feel disturbed. Actually, dripping from the faucet is the most common and easiest problem to fix, then,What to do with dripping water from the faucet

How can it be repaired? Let me explain it to you in detail."What to do with dripping water from the faucet"That's the question.

What to do if the faucet is dripping — the reason why the faucet is dripping

Actually,What to do with dripping water from the faucet?First of all, we need to find out what the reason is, and there are probably the following situations:

What to do if the faucet is dripping 1Leaking water at the water outlet.

It is caused by the wear and tear of the shaft gasket inside the faucet, at this time we only need to use pliers to turn the lid and take it off, use the clamp to take out the core gasket, and replace it with a new axle gasket to continue to use.

What to do if the faucet drips 2. The gap under the faucet bolt is leaking.

This phenomenon is caused by the wear of the triangle gasket inside the gland, at this time we only need to use screws to remove the bolt head, then loosen the gland, and then seal the triangle on the inside of the gland, and then replace it with a new one.

What to do if the faucet drips 3. Leaking water at the joint.

Mainly because the screw cap is loose, at this time we only need to re-tie the screw cap and replace it with a Y shape.

What to do with dripping water from the faucetRepair steps for faucets.

1. Prepare tools.

Before repairing, you should prepare the tools, mainly pliers, screwdrivers, wrenches and so on.

2. Close the water inlet valve.

Before the repair, the inlet valve should be closed to prevent water from spurting out during the repair process.

3. Check the parts of the faucet.

Remove the small screws from the faucet. Some screws are hidden in metal buttons and plastic buttons that are not easy to find, we just need to open the button and loosen the screws installed on the top of the mouth with lubricating oil.

4. Remove the screws that fix the washer.

Remove the old gasket and replace it with a new spool and install it in the spool.

5. Replace the valve core.

In the previous step, we talked about fixing the new gasket in the spool, and then we need to reinstall the part of the faucet and rotate it in a clockwise direction so that the wrench does not scratch the metal.

6. Check whether there is water leakage.

Once the above steps are over, you should use the handle to replace the button or disc, and then turn the water back on to see if there is any leakage.

My conclusion: That's rightWhat to do with dripping water from the faucetAnd the content of the maintenance method is introduced, I believe that you can deal with this kind of situation in your life in the future by learning the content I recommend, so that it is more cost-effective, and you don't need to spend money to hire a professional master to solve it. If you really can't do it yourself, then you can only ask for a master.

1.The faucet aerator is leaking.

Water leaks around the faucet aerator, mainly because the gasket of the faucet aerator is worn or aged. Generally, faucets have gaskets, and the quality of gaskets varies greatly from different brands. However, in this case, simply replace the gasket.

Remove the old gasket and replace it with a new one, taking care to choose a washer of the same size. Some faucets have washers that are fixed with nuts and screws, observe them before replacing them, and remove them after loosening them.

2.The gasket inside the faucet is damaged.

The faucet is not turned off well and dripping, probably because the gasket inside the faucet is damaged. There are plastic gaskets in the faucets, and the quality of the gaskets varies greatly between different brands. However, in this case, simply replace the gasket.

3.Axial gasket wear.

If the spout is leaking, it is possible that the axial gasket in the faucet is worn. You can first loosen and remove the gland with pliers, then remove the axial spacer and replace it with a new one.

4.The triangular gasket is damaged.

If there is a leak in the gap between the bolts of the faucet, it should be that the triangular gasket of the gland is damaged. First, loosen the screws and remove the bolt heads, then loosen the pressure closure and remove the lid of the rental car. Remove the triangular gasket inside the gland and replace it with a new one.

It's good to change it, it's not good to fix it.

The faucet is essential in every household, and we need it for water. And faucet dripping is relatively common, and there are many reasons for this phenomenon, thatHow to fix the dripping faucetand related knowledge introduction!

How to fix a dripping faucet

1. First turn off the sluice, and then remove the small screws. There are screws hidden underneath plastic buttons or pieces of plastic, etc., that snap into or screw into the handle.

2. After removing the handle, check the parts in the faucet. With pliers or a wrench, remove the fill nut. Turn the spool or shaft in the same direction you rotated when you turned on the faucet to unscrew them.

3. Remove the screws that fix the washer, and if necessary, you can use penetrating lubricating oil to loosen the screws. Inspect the screws and spool and replace them with new ones if damaged.

4. Change a new gasket, change a new gasket, and the faucet will not drip normally. You can see if the old gasket is beveled or flat, and remember to replace it with the same new gasket. Gaskets designed for cold water only expand violently when hot water flows through them, clogging the outlet and slowing down the flow of hot water.

Some gaskets will work in both hot and cold water, but you want to make sure that the gasket you buy for replacement is exactly the same as the original.

5. The new gasket has been fixed to the valve core, and the faucet can be reinstalled. Rotate the spool in a clockwise direction. Once the spool is in place, reattach the fill nut. Be careful not to leave scratches on the metal with the wrench.

6. Reinstall the handle and put the button or disc back on, turn on the water supply again, and check if there is any leakage.

The reason why the faucet is dripping

1. The cause of water leakage at the water outlet.

That is due to the wear and tear of the shaft gasket inside the faucet. Use pliers to loosen the gland and remove it, take out the shaft gasket with a clip, and replace it with a new shaft spacer.

2. The reason for the leakage of the lower part of the faucet.

That's caused by the wear of the triangular gasket inside the gland. You can loosen the screws and remove the tie head, then loosen the gland and remove it, and then take out the triangular seal shop on the inside of the gland and replace it with a new one.

3. Water leakage at the joint of the pipe.

Roughly the cap nut is loosened, at which point you can re-tighten the cap nut or replace it with a new U-shaped gasket.

That's all I have to offerHow to fix a dripping faucetAnd what are the reasons, do you have a better understanding of this aspect after reading it? I hope the above can help you, if you want to know other related information, please continue to pay attention to this**, more exciting stay tuned!

Faucets are common hardware in life, and they are essential for every household. However, after a long period of use, the faucet often does not close tightly, drips, the water output becomes smaller, and there is noise. Today, I will teach you some maintenance methods taught by the master, which is very simple!

First, the solution of dripping water from the faucet

There is a plastic gasket inside the faucet, if the faucet is always dripping, it may be that the gasket inside is broken, we need to buy a new gasket, and then replace it with it.

Of course, there are different types of faucets, and the methods of maintenance are also different, so let's take the left and right switch faucets as an example.

1. First of all, we prepare some tools, mainly including pliers, screwdrivers, etc.

2. Remove the screw cap on the faucet, and then use a screwdriver (screwdriver) to disassemble it.

3. Then we remove the swivel handle on the faucet to expose the valve core combination.

4. We use pliers to unscrew the valve core.

Then we unscrewed the spool off:

5. Disassemble the valve core, we will see the composition of the valve core, there is a red sealing ring inside, we add a gasket to the sealing ring, it can play a good effect, if there is no gasket accessories, you can take the tire inner tube according to the size of the sealing ring, cut a round gasket, it is also possible.

6. Then assemble it together and reinstall it to see if it still drips.

Second, the amount of water in the faucet becomes smaller

If it is not moved, the amount of water is getting smaller and smaller, it may be that there is a blockage in the water pipe, and there is a filter head at the outlet of some household faucets, we can check this filter head to see if there are many water holes that are blocked.

We can use a movable wrench to remove the filter head, clean it and install it again.

3. There is noise in the faucet

Noise may occur due to high water pressure, or if the faucet handle closes too quickly, or if there is an obstruction in the inlet pipe or limescale in the inlet pipe. If the water pressure is too high, we can adjust the switch of the main valve of the home immersion; If there is debris in the water pipe, we can first close the main water inlet valve of the home, and then check and disassemble the faucet to check whether there is debris inside.