How long after installation does the toilet work properly

The toilet bowl can be used 1 to 2 days after it is filled.

The underside of the newly installed toilet bowl was glued with glass.

and sealant, you can wait until the glue is dry, 1 to 2 days is enough, because flushing will destroy the solidification of the sealant and cause water leakage. How long it takes for a toilet to be used after it is filled depends mainly on the bottom connection closure material, and if it is bonded with glass glue, it usually takes more than 24 hours for the glass glue to fully solidify.

Toilet purchase

1. When choosing a toilet, the color should be consistent with the overall tone of the washbasin and bathroom. In addition, the pit distance must be measured accurately, and the error cannot exceed 1 cm, otherwise it will not be installed. The styles and colors of toilets on the market are very diverse, and the variety of patterns, reliefs and strange shapes of toilets makes people feel dazzled, so you must know the general style and color of your bathroom before choosing a toilet.

In terms of color, the color of the toilet bowl should be consistent with that of the bathtub and washbasin, and should not be deeper than the floor tiles.

It is better to harmonize the color tone with the wall tiles.

2. Pay special attention to the choice of toilet without glaze and contact in the water tank, and low-temperature ceramic bargains. Ceramics have a high water absorption.

3. The choice of glaze is very critical, and it must be easy to wipe. Give everyone a trick, you will know whether it is good or bad, use the key to scratch the glaze, wipe it with a cloth to see if you can wipe it off, ballpoint pen.

It's also okay to use toilet cleaners.

Use toothpaste or laundry detergent.

It is easy to use the glaze that can be wiped off, 4. In terms of flushing, the toilets on the market can be divided into siphons.

There are two types: open punch down type (i.e., straight flush type), but at present, the siphon type is the main one. Generally, the old house is renovated, squatting to sit on the toilet or there is frequent constipation at home can choose the direct flush type, the pipe is thin and will not block the toilet, and the others can choose the siphon type, and the toilet does not have a direct flush siphon type now.

1-2 days.

The newly installed toilet bowl is covered with glass glue and sealant, and it can only be used until the glue is dry, which can be used for 1 to 2 days, because flushing will destroy the solidification of the sealant and cause water leakage. If cement mortar is used for bottom bonding, it will take about a week to use normally.

When buying a toilet, you need to pay attention to the size of the pit distance and the size of the toilet. Regarding the size of the pit spacing, we must first understand the distance between the center of the sewer and the wall before purchasing, and then choose the appropriate size, the domestic standard pit spacing size is generally 300mm and 400mm. The size of the toilet is very large, and when purchasing, we must first consider the size of the bathroom.

If the bathroom area is relatively large, you can choose a larger toilet.

At least 24 hours later, you can take a shower, but don't get the water on the glass glue under the toilet.

Generally, it is necessary to wait for the silicone to dry thoroughly, and it is better to wait for a day. Hope mine can help you, hope!

You can use it whenever you want.

The newly installed toilet is ready for use in about a day.

Once the new toilet is installed, you need to apply sealant to its base and wait a day or so for it to dry.

However, it should be noted that if the toilet base is pasted with cement mortar, it is necessary to wait for about seven days to allow it to dry thoroughly to avoid the loss of sealing effect.

The toilet bowl can be used 24 hours after it is filled.

Because the toilet is installed with glass glue at the connection with the ground, it takes 1 day for the glue to dry, and the toilet cannot be moved or shaken at will during this period, otherwise it will affect the firmness of the toilet.

In addition, before installing the toilet, it is best to check the sewage pipe to ensure that it is dredged. Toilet installation usually uses glass glue, which is initially set 1-2 hours after application, and can be completely set in 24 hours.

Advantages of the toilet:

Clause. 1. Rinsing with water is more clean and hygienic, saving paper resources.

Clause. Second, there is a seat ring, which improves the comfort of use.

Clause. 3. The self-cleaning function is powerful and liberates people's hands.

Maintenance method of smart toilet:

When cleaning the toilet bowl daily, you can directly rinse the surface and back of the toilet bowl with water, and apply detergent to the surface and back of the toilet. Keep it clean and try to keep the restroom ventilated and dry.

The lid should be placed gently, otherwise the toilet lid will make a loud collision sound with the seat. The main purpose is to prevent the cover from falling too loudly, causing embarrassment or disturbing other people's rest. Don't be too violent when going to the toilet, and the lid will close slowly as soon as you put it lightly, so as to avoid using too much force to affect the function and life of the toilet seat.

It should be used after 24 hours, because it should be firm after the glass glue has dried thoroughly, otherwise, it will leak. It is recommended that you install the toilet with sand and cement for the best, strongest and more durable. That's how my house is installed.

After the toilet is installed, it should be flushed and debugged immediately, and all aspects are normal to be qualified. How long it can be used is for the base sealed with silicone glass glue, the temperature is different, the required time is also different, and the flushing is no problem.

Hello! Generally, the sealant is dry after the installation and water test, or the cement of the base can be used after you dry for 48 hours. During the period, pay attention to the water protection and maintenance of the base cement, and pour some water on the periphery of the base. It is best not to apply force to the toilet bowl during maintenance.

If it is fixed with expansion wire, it can be used at any time, and the glass glue can only be used after the glass glue is dry.

Generally installers will say 24 hours, or 48 hours. In fact, the workers are skilled. It can be used in 3-5 hours after loading.

As long as you sit down honestly!

If you apply glass glue, it is best to use it after 48 hours.

If it is not glass glue, it is generally fine for 24 hours.

If you look at the instructions for the sealant, you can see how long it dries, and it's usually 24 hours, but it's fine after eight hours.

This mainly depends on the brand, and the most important thing is the machine inside.

After a day, it was ready to use. Don't use it right away.

With the improvement of living standards, everyone likes to install toilets at home, but if you want to ensure that the toilet can be used normally, then you must install the toilet in strict accordance with the specifications, especially the toilet after installation, it needs to be placed for a period of time before it can be used. So, how long does it take for a toilet to function properly after installation? Do I have to leave the toilet for 24 hours after installation?

Let's answer them one by one.

How long after installation does the toilet work properly

1.How long can the toilet be used after the vertical stove is installed, if the rubber flange is installed and the slip seal is installed, it can usually be used immediately, but the base needs a certain amount of time to be fixed, and it is best to use it after 24 hours. How long does it take to use the toilet bowl after it is filled.

2.How long the toilet can be used after it is filled mainly depends on the bottom connection sealing material, if the glass glue is used to glue and paste, it usually needs to wait for more than 24 hours for the glass glue to completely solidify and the toilet can be used. If the bottom of the toilet bowl is made of cement mortar for bottom bonding, it will take at least 7 days to use it, and if it is forcibly used halfway, the waterproof and fixing effect will be greatly reduced, and it is easy to separate and fall off.

Do I have to leave the toilet for 24 hours after installation?

The toilet must be left out for 24 hours after installation.

The reason why the toilet is installed for 24 hours is because the glass glue is completely dry, if it is used, the glass glue may not be completely dry, and the toilet is not installed firmly.

Before installing the toilet, you should carefully read its instructions and construct according to the requirements. The "Code for Construction of Residential Decoration and Decoration Projects" stipulates that sanitary ware and water inlet pipes and sewage outlets must be tightly connected, and there shall be no leakage;

The toilet should be fixed and installed with expansion bolts, and sealed with lime or silicone glue, and the base should not be fixed with cement mortar. This not only avoids cracks in the toilet caused by dry cracking of cement, but also facilitates repairs in the event of a problem in the future.

To sum up, the toilet can only be used normally after 24 hours after installation, if the toilet is installed with a rubber flange seal, then you can use the toilet immediately, but the toilet base still needs to wait for 24 hours before using it will be the best. The reason why the toilet is installed 24 hours after installation is because you need to wait for the glass glue to dry completely, and I hope you can use the toilet according to the regulations.