How long does it take for a sink to be used after the glass glue is finished

If the environment is not humid, glass glue.

It will set completely in an hour, of course, the longer the time, the better the solidification effect, but don't use and shake it just after putting it on.

Glass glue is a tool often used in home decoration, such as when we install windows, bathtubs, basins, and bathroom glass, glass glue will be used, which can bond the surface of glass and other substrates, and has a certain waterproof and anti-corrosion effect. However, after playing glass glue, it is best to wait for it to dry and solidify before dipping and releasing water, otherwise the glass glue will be made in vain.

It is best to wait for the glass glue to dry thoroughly before using water. High-quality glass glue will not cause any problems if it is wetted after the surface is cured, but low-quality glass glue will become soft if it is exposed to water before it dries, which will affect the overall decoration, so it is best to buy good glass glue. The surface curing time of neutral glass glue is about 2 hours, the surface curing time of acid glass glue is about 30 minutes, and the surface curing time of neutral variegated glue is generally within 30 minutes; But if it is completely dry, the acid glass glue is fully cured within 24 hours; Neutral glass glue is usually a little slower, curing completely for about 48 hours.

It is possible to fall off, or it will become soft, in this case, you can only shovel off and re-apply a layer of glass glue, otherwise it will affect the adhesive performance of glass glue and prolong the curing time. Even after drying, problems such as degumming, mold, and blackening will occur, and the bonded ones will not be strong or even fall off. After beating the glass glue, in addition to not drying thoroughly and not wet, it cannot be moved arbitrarily, otherwise it can only be reworked and redone.

If you want the glass glue to dry quickly, you can use an electric fan to blow on the glass glue position for a few hours, and you must use cold air when blowing, and blow away from the glass glue position. When it feels a little hard, you can soak it in potassium permanganate for two hours, or soak it in salt water for three hours to remove the flavor, and blow it a few times with a hair dryer after the water has dried.

Glass glue can also be dried quickly by using sunlight or electric lights. The glass glue must be evenly beaten and not too thick.

1.Pay attention to the ventilation environment. Use glass glue in a well-ventilated area. After use, be sure to open windows and keep ventilation so that harmful gases can be quickly discharged.

2.Avoid contact**. In particular, to prevent glass glue from entering the eyes, when using, tools such as protective covers can be used to prevent glass glue from entering the eyes.

3.Wear a mask when using glass glue to prevent harmful gases from being inhaled into your body.

4.Place out of sight of your child. After using glass glue, pay attention to seal well and keep it out of the reach of children.

The edge of the sink needs to be glued with glass. If it is not sealed properly, water will seep into the cabinet, causing mold and blackening.

If it is just a few spots of mildew, or the area of mildew is not very large, you can use a toothbrush dipped in a little toilet cleaner to brush back and forth to remove the dark spots on the surface. The disinfectant is also suitable for the mildew parts that are not very large, cut a piece of cloth, soak it with 84 disinfectant, and apply it to the black and moldy glass glue.

If the first two methods do not work, or the area of mildew is larger, then you can only shovel off the glass glue again, if the original glass glue is used, then the new replacement should be used anti-mildew glass glue, but the anti-mildew reputation glass glue is not never moldy, but can be maintained for a few more years.

Precautions: 1. It cannot be used for structural bonding, and the anti-mildew glue cannot withstand very heavy force.

2. When gluing, you must pay attention not to get the glue to your eyes, if there is any contact, please rinse with water immediately and seek medical attention in time.

3. Avoid inhaling too much vapor and avoid contact with children.

1. Generally, wait for about 24 hours, do not use and mess with the water locust groove in the middle, and it can be used after the glass glue solidifies.

2. When gluing the edge of the sink, after putting the pool well, draw a circle along the four sides of the basin with a pen, and then take the pool up; Hit a circle of glass glue along the line next to the painting, put the basin down and press it after it is beaten, and scrape off the extra glue with a scraper.

3. In addition, the glass glue can be replaced with a sealing strip, and the sealing strip also has a waterproof operation for Mingfeng. The sealing strip is made of silicone, which is roughly the same as glass glue, and the waterproof effect is exactly the same.

It should be noted that the surrounding moisture must be blown dry before gluing.

So there is no need to play glass glue at all, there are many benefits of playing glass glue without sealing strips, and sealing strips can do it:

1. Waterproof. The sealing strip is made of silicone, which is roughly the same composition as glass glue, so the waterproof effect is exactly the same.

2. Mildew-proof and beautiful. We all know that no matter how good the glass glue is, there will be more or less signs of yellowing and mildew after a few years of use, and the sealing strip is inside the edge of the sink, which cannot be seen from the appearance at all, so the aesthetic performance is also very strong.

3. Shock absorption, protect the table and reduce noise. Playing glass glue is a direct force on the edge of the sink, and there will be friction on the edge of the quartz stone in the daily use of the sink. The stress on the strip will be different, and the soft contact will have no effect on the countertop, reducing vibration and noise accordingly.

4. Environmental protection. Glass glue is slightly toxic, the smell is acidic, and it is very unpleasant. Therefore, the rubber strip is much more environmentally friendly than the glass glue.

It is best to put glass glue on the edge of the sink, if it is not sealed well, the water will seep into the cabinet!

"It is said that if you play glass glue for a long time, it will become mildew" My house is indeed moldy for a long time, and I don't know if there is a way to suppress it.

You ask the people who sell you this, they are more professional.