How to fix a leak under the toilet, how to fix a leak at the bottom of the toilet

The reason for the leakage under the toilet bowl should be investigated, mainly divided into the bottom sealing is not tight, the bottom is damaged, the bottom sealing is not tight, the original glue needs to be removed and stained with new glass glue, to be constructed in a dry situation, and to wait for the glass glue to dry before it can be used, and the bottom of the toilet is damaged and leakage, you can only change the toilet.

Choose which toilet is good to use:

1. Flush toilet.

The straight-flush toilet is the use of water flow impulse to defecate, its pool wall is steep, the water storage area is small, the hydraulic concentration has a high flushing efficiency, and the flushing pipeline is simple, the path is short, there is no back-flush bend design, the gravity of the water can accelerate the flushing, and it is not easy to block the problem in the flushing process, and the water-saving effect is also very good, but the straight-flush toilet has one point that is very unfavorable, that is, the flushing sound is loud, and it is easy to affect others when used at night.

2. Siphon toilet.

The drain pipe structure of the siphon toilet is S-type, so there will be a certain water level difference after water injection, and when flushing, it will let the suction power generated in the sewage pipe and defecate, its flushing noise is small, and the selectivity is more, there are mainly two styles of vortex siphon and jet siphon, and the water flow will form a vortex along the pool wall when the vortex siphon flushes the water, which can increase the flushing intensity of the water flow on the pool wall, and a jet auxiliary channel is added at the bottom of the jet siphon, which is aimed at the center of the sewage outlet and quickly flushes away the dirt.

The reason for the leakage under the toilet is most likely that the flange ring is broken, remove the toilet, replace the flange ring and install it, put it back in place and play sealant, and the toilet should not leak.

If the bottom of the toilet is buried in the middle of the cong and the problem of water seepage, you first need to close the water inlet valve, and then completely remove the glass glue that touches the bottom of the toilet and the ground. After water seepage, the glass glue may be affected, and the problem of yellowing and blackening may appear.

The glass glue is all removed, and then the toilet bowl is lifted up to a certain angle, check whether the flange ring connected to the sewage pipe mouth has been damaged or aged, and replace it with a new flange ring. Put it on the sewage outlet, and then put it vertically in the sewer pipe. Clean the area that comes into contact with the ground and reapply the glass glue.

Enter the area and get the decoration for free**].

The toilet is used very frequently in life, so it is prone to some problems, among which the water leakage problem and blockage problem are more common, especially the water leakage problem is more difficult to solve, which is usually manifested as toilet drainage, toilet bottom leakage, toilet water flow, toilet tank leakage, etc., so how to repair the leakage under the toilet? Let's take a look. First, how to repair the leakage under the toilet, the cause of the leakage under the toilet must be investigated, mainly divided into the bottom sealing is not tight, the bottom is damaged, the bottom of the two reasons, the bottom sealing is not tight, the original glue needs to be removed and stained with new glass glue, to be constructed in a dry situation, and to wait for the glass glue to dry before it can be used, and the bottom of the toilet is damaged and leakage, you can only change the toilet.

Second, choose which toilet is easy to use 1, the direct flush toilet is the use of water flow to defecate, its pool wall is steep, the water storage area is small, the hydraulic collection has a high flushing efficiency, and the flushing pipeline is simple, the path is short, there is no backflow bend design, the gravity of the water can accelerate the flushing, and it is not easy to block in the flushing process, and the water-saving effect is also very good, but the direct flush toilet has one point that is very unfavorable and combustible, that is, the flushing sound is loud, and it is easy to affect others when used at night. 2. The drainage pipe structure of the siphon toilet is S-shaped, so there will be a certain water level difference after water injection, and when flushing, it will let the suction generated in the sewage pipe and defecate, the flushing noise is small, and the selectivity is more, there are mainly two styles of vortex siphon and jet siphon, and the water flow will form a vortex along the pool wall when the vortex siphon is flushed, which can increase the flushing intensity of the water flow on the pool wall, and a jet secondary channel is added to the bottom of the jet siphon, which is aimed at the center of the sewage outlet and quickly flushes away the dirt. Summary:

The above is an introduction to how to repair the leakage under the toilet, I hope the content shared can give you some reference, if you want to know more about related knowledge, you can **** Qijia information.

Do the math how much it will cost you to renovate your home

Why is there water leaking out of the place where the toilet is connected to the floor? Bathroom toilet is a product with high frequency of use, and many families only have one toilet, if there is a problem that can not be used, it will greatly affect the quality of daily life, so as such an important household object it is necessary to understand the knowledge of toilet maintenance. So today, I will mainly share the causes and maintenance plans of the bottom of the toilet, and then let's find out together!

1. There is a crack at the bottom of the toilet bowl caused by the toilet leakage, this situation is mainly caused by the poor quality of the toilet, and even the toilet has cracks when it is fired, and the water leaks out along the crack when it is used.

2. The toilet and the ground are generally bonded with glass glue, if the glass glue is too little or the glue is too thin, in the cumulative use, it is easy to appear between the glass glue and the toilet or the ground, in this case, you can see whether there is an obvious gap between the glass glue and the ground, if so, you can shovel the existing glass glue clean, and then buy the relevant glass glue for re-bonding, under normal circumstances, try not to use the toilet in 24-48 hours after smearing.

3. The quality of the water parts in the toilet is not up to par, the toilet parts are aging after being used for a long time, the buoyancy of the float in the toilet tank is not enough, the float is mainly to control the water valve in the water tank, if there is a problem, the water valve can not be automatically closed, and the water will always enter the water, and it is easier to seep out of the base of the toilet when the amount of water is relatively large.

4. It may be that the sealing ring at the bottom of the toilet is not tightly sealed during installation, and the sewage outlet at the bottom of the toilet bowl and the diameter of the toilet are not aligned when the toilet is installed, resulting in the liquid overflowing from the connected place when the toilet is draining or discharging.

There are generally two situations of toilet leakage, one is the leakage of the toilet tank, and the other is the leakage of the bottom edge of the toilet.

Check whether the rubber gasket of the drain under the ball valve is aged and not tightly sealed, and replace it immediately if a water leak is found.

2.Water tank leakage, basically a drain valve problem, check the water tank outlet rubber plug, if the water outlet rubber plug is damaged or there is a foreign body blockage resulting in the rubber plug is not tightly sealed, it will also cause the toilet to flow more than once.

3.Check whether the connection between the spherical float of the water tank and the water inlet switch is loose, whether the float is in place and the switch is not closed, resulting in the water inlet does not stop, and the water flows out from the upright discharge pipe after the water is full, as long as the connection between the float and the water valve switch is tightened. If the rubber ball valve is damaged, the seal is not tight, and there is a water leak, it needs to be replaced immediately.

It is necessary to find the cause of the leak first, and if the toilet is of poor quality and causes the leak, replace it with a new one. If the connection between the toilet bowl and the sewer pipe is leaking, the connection should be sealed with glass glue and sealed with glue, and it can only be used after 48 hours of drying.

Hit ** to find the property. The property staff repairs these things professionally, quickly and conveniently.

It should be repaired by a professional maintenance personnel, which is the safest and most effective method, and will not cause hidden dangers.

After the toilet is used for a long time, it will inevitably age, crack, leak and other phenomena, and water leakage is the most serious, which will not only affect daily use, cause potential safety hazards, but also affect the relationship between neighbors, so it should be repaired in time and not sloppy. So how to fix a leak at the bottom of the toilet? What causes a leaky toilet bottom?

To find the cause of the leakage first, if the quality of the toilet is too poor and the leakage is caused, then replace the toilet with a new one. If the connection between the toilet bowl and the sewer pipe is leaking, it is necessary to seal the connection with glass glue and seal the slow connection, and it can only be used after 48 hours of drying.

What is the cause of a leak at the bottom of the toilet:

1. The installation is not professional, and the flange ring is not installed, because the flange ring has the function of fixing and preventing overflow.

2. Long-term use of the toilet, the toilet and the ground are loose, resulting in the inconsistency between the ground sewage outlet and the drainage hole. Cracks in the toilet bowl itself, if not installed properly, can lead to water leakage.

3. When installing the toilet, many workers do not use expansion bolts to fix it, but use silicone resin with a strong adhesive for sealing. After a long period of use, the putty will harden and cause cracking and leakage. Or it is installed with adhesive silicone, which is also prone to localized leakage before it is completely cleaned.

4. The quality of the water parts in the toilet is not good, the parts in the toilet will be aging after being used for a long time, the buoyancy of the float in the toilet tank is too sufficient, and the float is to control the water valve in the water tank, if there is a problem, the water valve can not be automatically closed, it will always be water, and it is easy to seep out of the base of the toilet when the amount of water is large.

Article summary: Well, the relevant knowledge about how to repair the leakage at the bottom of the toilet and what is the cause of the leakage at the bottom of the toilet is introduced here, if you need more information, please continue to pay attention to Qeeka Home, and we will have better and more exciting content for you in the future.

If there is a leak at the bottom of the toilet, one of the ways is to reinstall the toilet, but this is generally more applicable to the new toilet, which may be that the connecting parts at the bottom of the toilet are not connected, or it may be that the sealing ring is not installed, resulting in the leakage of the base of the toilet. But you must pay attention to tightening it when reinstalling, so that you won't install it again.

If it is not the first case, then there are also its own reasons for the leakage under the toilet, and some are because the toilet itself has cracks, and it will also leak at this time. We had no choice but to ask a professional for help.

If the first two cases are not repaired, then the only way to find a professional master to repair the toilet, so that it does not leak, if it is really not repaired, then everyone can only go to a new one.

If the bottom of the toilet is leaking, you can clean the bottom of the toilet bowl first, and then use glass glue. Seal the bottom of the toilet bowl all around, and if it still leaks, then you need to replace the toilet.

The bottom of the toilet is leaking. It is better not to repair. Just buy a new one. There are toilets to throw at you. Once installed, it won't leak. If you find someone to fix the same leakage is not good, it is very troublesome, it is not as good. A new one is the most cost-effective.

This has a kind of leakage glue that is very good, but it is recommended that you find a professional maintenance master to find out the cause of the leakage first, and then take corresponding measures, otherwise it will not be good, and the bathroom will be very smelly.

If the internal parts of the water tank are aging, you need to replace the parts as soon as possible, and if the connection between the toilet and the sewer pipe is leaking, you need to reinstall the toilet and re-seal. If there is a problem with the water inlet group and the water outlet group of the toilet, you need to open the water tank and see that the water tank is overflowing, and the water flowing out of a water pipe indicates that the water inlet group is broken, and if there is a sound of water ingress, the water outlet group is broken. If the water tank is leaking, you can take off the drain core and clean the scale.

After the above problems are eliminated, it is due to water seepage caused by improper installation:

This is the flange of the base is broken, and it has to be replaced with a new one.