How to Break My Computer, How to Break a Computer

Tell you a way that you won't be responsible, you can block the exhaust with something, so that the computer burns back and you take it away, so you just have to say that the computer exhaust is not good, and that's it, I used to work as a network administrator

That's a simple question!! What do you mean, I understand, that is, to avoid trauma and numbness? It can't be seen with the naked eye.

Let's get started. Method 1: Prepare 1 battery with electricity, No. 1, No. 5, No. 7, and then prepare 2 conductive wires.

Connect two ends of the wire to the plus or minus stage of the battery, and then the other two ends will slide freely on the line exposed outside next to the chip which hosts! By the time you see the spark, then your master is dead!! It's better to make a few more strokes.

You know what I mean, right? Method 2: Connect the adjacent wires on the chip directly with 1 conductive wire.

Then power on! Hey. The main version is burned, right?

Method 3: Use a magnet directly under the hard disk (that is, the side of many chips). The greater the magnetic force of the magnet, the better, and of course the bigger the magnet, the bigger the magnet.

Then turn it on. After a few seconds, does the computer get pregnant? Of course, there are so many ways to adapt to the problem, and they are absolutely invisible to the naked eye.

Absolutely enough, right? These means are generally the whole manufacturer, after buying a computer, the first 3 months to replace new things hemp. That's it!!

Haha, that's an interesting question. Throw the host down from the upper floor, it's definitely bad, it's not bad, you look for me.

Isn't it easy to rectify the bad? Crazy overclocking is fine, or just smash it with a hammer.

**Just crash? This is enough to determine that the computer is broken, so you can tell your parents so.

On hackers, engage in several rogue software, deliberately poison the computer, and generally paralyze; Cut one or several wires with a knife in the subtle places of the motherboard, basically paralyzed, generally the motherboard or CPU is broken, there is no need to repair, and those who repair the computer will also be recommended to buy a new one.

On the hacker**, engage in several rogue software, so that the computer is deliberately poisoned.

1. It is recommended to break the motherboard, the motherboard is damaged, and if the platform is old, it will lose the value of replacement; Like the multiple devices on the motherboard, get rid of two, or warp the BGA with things, or cut off a few wires in the motherboard with a knife; Try to be in a place close to the CPU.

2. Hard disk: plug and unplug the power supply repeatedly; Find a universal low-level software to repeatedly low-level; Motherboards, graphics cards, sound cards, network cards: the most feared is high power and static electricity; Overclocking is also fine, but it needs to be turned on 24 hours a day.

Did they go to a certain place to repair? 、？You can conspire with the repair shop owner, hehe.

It is recommended that the landlord find some viruses to go down to the computer、Let him card unbearable。。。 Hahaha.

It's very simple, the mechanical disc is removed and wrapped in a few towels, and it is held with both hands to ensure that there is a problem.

This asked, get some water and turn on the machine and it burned. It's broken.

Just take off the hard drive cable.

1: If you don't turn the host fan, it will definitely be damaged for a while.

2: When you go to buy a memory module, it must not be a brand of garbage, and then plug it in, and run it with more.

3: Connect the power cord in the main chassis to other hardware, then turn on the computer, and finally restore after bypassing, OK.

4: Reverse the positive and negative poles of the hardware, and finally restore it.

5: Find a soldering iron, remove a few resistors from the motherboard and burn them on the solder.

6: Put the connector of the total power supply, positive and negative reverse connection and finally restore.

Hello. To break the computer, just pour some water on the motherboard.

It depends on what you need to break it, if you just want to get into the system or the hard disk is broken, then turn on the machine, when the big data is copied, give the hard disk a few slaps, if you want to break the CPU, then find a wire, the front foot of the CPU power supply pole directly to the back foot, if you want to damage the bridge chip, then on the bridge chip side, it is also to find the pole, directly short it, it is very easy, don't worry about electric shock, 12V on the motherboard, the electricity does not die.

Turn on the BIOS, turn up all the parameters (such as voltage, overclocking, etc.), restart (if you can still turn on), start the game, and after a while, there will be a significant effect such as a blue screen. (However, the motherboard may be burned out).

It's your computer that you can do whatever you want, but if it's someone else's, you may have to bear it.

Legal responsibility, think twice.

Ordinary people can't get it unless they put water in it.

When you turn on the machine and soak it in water, it will break.

This feeling is good

First of all, I will teach you how to destroy a hard drive: first. You can kick the case or lift it up a little while you copy a file, and then put it down freely, in short, to create a strong vibration. Second. The same is the copy of the file is power off, and the hard disk will be scrapped a few times.

Then it's time to burn the CPU and graphics card: open the side panel of the case and find something to jam the CPU fan and graphics card fan, and then turn on the computer and play for a while until the high temperature blue screen. After cooling down, it can be turned on again, so let's do it again.

Two or three times would be fine. Then remove the foreign object and close the side panel.

Finally, the motherboard: this is not simple, the electronic lighter of the lighter is a method, and you can short-circuit it anywhere, and the weak current can not see the traces.

Wearing a nylon suit can be vigorous, and you can use the static electricity on your body to pierce the motherboard at once. It's pretty easy to make. (discharging at a small element).

Turn on the main unit, get some water on the motherboard, and you're done.

Please use 220V wires for household electricity, and each part is directly connected with 220V to ensure that no one can see it

Electrical products are most afraid of high temperatures! Continuous use in high temperature environments and play large-scale online games!

I can only say one thing, for the sake of the old not to go, the new not to come, you are ruthless enough.

Or if you buy a bad CPU and replace it, then you will say that you don't know how to break it, and the screen will go black when you use it.

Remove the cooling fan or plug the heat vent, hehe, and see if it still breaks.