When the bathroom is tiled, the mason says that you can t make floor tiles on the wall, what is the

When the bathroom is tiled, the mason said that the floor tiles cannot be used on the bridge, and the main reason is also because if the floor tiles are on the wall, the weight of the floor tiles will be heavier than the weight of the wall tiles. Therefore, the reason why the mason said this is only for safety reasons, and because the bathroom uses water for a long time, it will also easily cause the tiles to fall off. Therefore, when choosing tiles, try to focus on wall tiles, and do not choose to use floor tiles on the wall, when laying tiles in the living room, there are many people who choose floor tiles on the wall in order to make the living room floor tiles and wall tiles consistent.

Many people will want to put the bathroom tiles on the wall when designing bathroom tiles, but it is necessary to take into account the choice of bathroom floor tiles, which are generally 30 30. If you put 30 or 30 cm floor tiles in the bathroom, you will also feel that the overall effect is not particularly atmospheric. Therefore, when choosing bathroom tiles, the wall tiles must be 40 80 or 30 60, which will make the overall effect of the bathroom look more high-end and atmospheric.

In fact, there are many people who use floor tiles as wall tiles in the living room, mainly because they think that the quality of the floor tiles at home will be better, and they will be directly laid on the wall, and the life of use will be longer. At the same time, for the overall color matching of the room, in order to present a more consistent effect, the floor tiles will be considered on the wall. However, the floor tiles of the bathroom will be much heavier than the weight of the wall tiles due to the weight of the floor tiles, and the bathroom is often in a damp phenomenon, due to the comparison of floor tiles, it is usually easy to cause the wall tiles to fall off.

When tiling the bathroom, young people should realize that they should not only focus on aesthetics, but also consider quality and safety. Because water is often used in the bathroom, and there is water vapor in the process of bathing, it may be easy to cause the tiles to fall off due to regular use. When letting the masons lay the tiles, try to choose to buy a better tile adhesive, so as to reduce the tile falling off.

Bathroom renovation techniques are very important, because the bathroom is the wettest place in a family, and if the masons say so, you should respect their opinions because they are more experienced.

This is because if the floor tiles are on the wall, it is likely that the viscosity of the floor tiles will be bad due to moisture, and then there is also a high probability of water seepage from the tiles, so it is very unrecommended.

The reason is that the bathroom tiles may not be very smooth, and then it may be that the wall of the bathroom does not meet a requirement for tiling, so this worker will say so.

This is because the wall is relatively damp, and if some tiles are laid, it is likely to affect the effect and may cause the tiles to be not tightly attached.

Because the fluidity on it is particularly strong, if you go up to the wall, it is easy to fall, so you can't do this.

It's because it's more humid, and if you choose some bricks, it will affect the effect, and the effect is not good-looking.

Mainly because the floor tiles are not the same as the bricks on our walls, so some masons will say that the floor tiles cannot be on the wall.

The biggest difference between tile decoration, floor tiles and wall tiles is anti-slip, waterproof and wear-resistant. As you can imagine, in these three aspects, many people mistakenly believe that floor tiles are better than wall tiles, so they naturally put floor tiles on the walls.

From the point of view of the water absorption of wall tiles and floor tiles, due to the more pores of wall tiles, it is easy to bond, and the water absorption is also high, while the water absorption of wall tiles is relatively low. Floor tiles can easily fall off the wall and pose a danger to the home. For spaces with high humidity, bathrooms and kitchens, the floors of these two spaces should be covered with floor tiles with lower water absorption, which does not easily hide dirt, while the walls are usually glazed, which is not easy to clean, but firm.

Wall and floor tiles should not be mixed. It is difficult to put floor tiles on the wall, so the cost will be higher than wall tiles. Friends who are on a tight budget for renovation are advised not to do this.

Once there is a problem, it is a waste of money to rework again.

The water that flows from the wall flows directly onto the glazed surface of the floor tiles. Because the floor tile will not be flat, it must form a slope with the floor drain so that water does not deposit and eventually flow into the floor drain. Another advantage of wall tiles and floor tiles is that there is geothermal energy in the home.

In the process of pressing the wall tiles of the floor tiles, the floor tiles are on the wall tiles, and the bricks also have the expansion coefficient of thermal expansion and cold contraction. Due to the action of geothermal energy, the ground temperature can change a lot.

If there is no room for expansion due to long-term thermal expansion, the wall tiles will be squeezed for a long time, which will eventually affect the service life of the wall tiles and floor tiles; In the process of pressing the wall tiles, the floor tiles are not directly on the wall tiles, but have a certain expansion space with the cement wall behind the wall tiles, which can ensure that the tiles will not be squeezed in the process of thermal expansion and cold contraction. The wall tiles are laid first, but the bottom tiles are empty, then the floor tiles are laid, and finally the last row of wall tiles is filled to press the floor tiles. Hanging tiles on the wall is much more difficult than gluing them from the ground.

It is difficult to ensure complete bonding until the cement has dried. Throwing bricks is always inevitable. Another difficulty in hanging tiles is the need to hang line leveling to keep the tiles on the wall flat.

The thickness and material of floor tiles and wall tiles are not the same, and the bearing capacity of wall tiles is not as hard as that of floor tiles, since they are easy to fall off if they are laid on the wall.

There is no way to ensure the effect of decoration, it will affect the overall decoration area, and this decoration method does not meet the industry standard.

Because most of the floor tiles are relatively heavy, there will be problems with firmness, which can easily lead to falling off, which will be dangerous.

With the improvement of living standards, everyone has an understanding of the decoration of their homes, and they want to be different from others, so they will also put some bricks on their walls. Because the bathroom needs to be separated from dry and wet, if you don't choose waterproof wall tiles or better quality wall tiles at this time, it will easily have a certain impact on the overall shape. In addition, the floor tiles are attached to the ground, do not have the idea of the floor tiles sticking to the wall, once it is implemented, then the ultimate victim is yourself.

In general, it is true that the floor tiles are particularly heavy, and if they are on the wall, they will be prone to hollowing, which will also lead to falling off.

It's true, because the floor tiles are relatively small and spread on the wall, which looks particularly stingy, and the floor tiles are prone to hollowing when laid on the wall.

This is someone else's experience, if he said so, it's okay, I think you should buy wall tiles, or buy wall tiles wall tiles are lighter.