What are the classifications of bathroom tiles? How to choose bathroom tiles?

Siamese bricks are one of our most common anti-slip bricks, and it is also the most widely used kind of anti-slip bricks, its wear resistance is the best among all anti-slip bricks, correspondingly, the calculation has gone through a long time, and its anti-slip performance is as good as before, which is one of the most popular non-slip bricks. There are actually two types of glazed tiles, one is made of terracotta and the other is made of china clay. The former has been washed off due to excessive ambiguity, while the latter has good stain resistance in addition to good anti-slip properties and is currently widely used in the living rooms of stores.

Polished tile is the least non-slip brick, but its appearance is very good-looking, the surface is bright, the decorative pattern is exquisite, the full use of the decorative environment is the best, it is often used as a floor tile for the living room, this kind of brick is not suitable for kitchen and toilet floor paving.

<> Bo change brick, it is the highest grade of non-slip floor tiles, it is not famous for its good anti-slip performance, but because of its good hardness and good mirror reflection effect by people. This kind of brick is very expensive, ordinary families will not use it, and it is also used for floor paving in toilets, kitchens, and bathrooms. Look at the reflective effect and observe the color and flatness of the tile surface.

Generally speaking, the clearer the color and the stronger the reflective tile, it is the best, and at the same time, it depends on whether there are pinholes, which are easy to accumulate swag. You can also look at the quality from the imprint, check the surface quality of the ceramic brick, and judge the glaze on the surface of the ceramic brick, so as to use a hard object.

Measured at the site of the purchase of tiles. Measure the edges and diagonals of the tiles with a ruler or tape measure to check the dimensions. Look at the glaze without pinholes and spots, the glaze is simple, and there is no color difference.

Basically, it is necessary to see whether there are black spots, bubbles, pinholes, cracks, scratches, color spots, missing edges, missing corners, etc. Knock on the tiles, listen to the sound, and discern the density. The most important thing in choosing tiles is to consider the quality, there are many criteria for distinguishing the standing or upside-down tiles, you can knock it, whether the sound is clear or not, the porcelain change density of the tile is high, and the quality is good.

Full-body bricks, glazed bricks, polished tiles, vitrified tiles, etc. The bathroom wall should choose waterproof and mildew-resistant tiles, and the floor should be preferably patterned and non-slip tiles. When we choose a tile, we can see from the side whether it is flat and whether there are pinholes of uneven thickness, so that the construction personnel can repair them in time.

There are all-over tiles, glazed tiles, polished tiles. Vitrified bricks, you can choose the whole body brick according to the production process, because the bathroom is a wet place, so the choice of this is more moisture-proof and cost-effective.

First, glossy, second, with concave and convex design, third, non-slip, fourth, colorful, fifth, waterproof. Tiles of waterproof and non-slip design should be chosen.

First, the classification of bathroom tiles

1. Bathroom tiles are divided into enamel interior wall tiles. Commonly referred to as a tile, it is known as a glazed tile because it has a layer of enamel on a fine ceramic surface. The glazed tiles are smooth and glazed with colorful patterns such as monochrome, patterns and high-quality art patterns.

Enameled tiles have the characteristics of no pollution, corrosion resistance, and easy cleaning, and are mainly used in kitchens and bathrooms. Enameled tiles have a high water absorption.

2. Color enamel ceramic coating. Referring to enamel tiles, the surface is decorated with beautiful glazes and designs. The state stipulates that the water absorption rate of such products is not higher than 10%, because the fine ceramic body has a small hygroscopic expansion, which can be well combined with the enamel surface, so it has a high resistance.

It can be used both for flooring and for walls.

3. The bathroom is made of ceramic tiles. Also known as homogeneous bricks, full-body bricks and glass bricks. Bricks have a high sintering temperature and good porcelain quality.

The water absorption rate is less than and the wet expansion is minimal. Therefore, bricks have high bending resistance, wear resistance, acid and alkali resistance, do not change the color of the mountain cover, and have a long service life. There were no visible defects in the freeze and thaw cycles at -15 and 20 for 20 times.

Second, how to buy bathroom tiles1. The special environment requirements of the toilet must be non-slip and waterproof for its sheet metal decoration, so it also has good performance in a long-term wet state. Therefore, bathroom tiles must have good slip resistance and wear resistance. The bathroom is easy to accumulate dirt, so the dirt capacity of the wall is better, decorative, and there are some requirements than the wall, then you can choose enamel tiles with rich colors and rich patterns and good anti-fouling ability.

2. The size of the bathroom is narrower than the other areas of the house, so the size of the tiles should not be too large. You can choose between 300 400 mm, 300 300 mm or 250 330 mm, glazed tiles, mosaics, etc. To sum up, the choice of bathroom tiles is mainly divided into tiles.

The surface of the wall has high requirements for water resistance, corrosion resistance and mildew resistance. Soils have high requirements for anti-fouling and anti-slip properties.

Summary: Here, we have introduced the information about stuffy filial pietyBathroom tile classificationand knowledge such as shopping. Bathrooms can also easily accumulate dirt, so the tiles on the walls should be good to resist dirt.

You can get it for free

The bathroom is the most frequent use of a place, we all know, sometimes there will be some water in the bathroom, so when choosing tiles, it has an anti-slip effect, so as to avoid slipping, therefore, the quality of the tile is waterproof is very critical. SoTypes of bathroom tilesWhat are they? Which ones are better, today, will give you some information on how to choose bathroom tiles.

Types of bathroom tiles-1. Glazed bricks.

This type of tile has a glazed surface because it will give you a better effect. The enamel surface of glazed tiles is smooth and flat, and the patterns are rich, with various patterns such as monochrome, printing and art. At the same time, glazed tiles with low pollution, corrosion resistance and easy to clean are often used in kitchens and bathrooms.

Glazed bricks have a high rate of water absorption expansion is a small water absorption, and deformation, but in the state of freezing and thawing for a long time, from the phenomenon of **, so it can not be used outdoors.

Types of bathroom tiles-2. Ceramic tiles.

The surface of this floor tile is colorful, and there are very beautiful and exquisite glazes and patterns on the surface. According to the relevant national regulations, the water absorption rate of the product can not be higher than 10%. At the same time, because the ceramic body of the ceramic plate absorbs moisture, and the pants have a small expansion and deformation can be combined well with enamel, so they are often used for floors and bathroom walls.

Types of bathroom tiles-3. Porcelain tiles.

Tiles have a relatively high temperature during the manufacturing process and the porcelain grade is very good. The water absorption rate is usually less, and the deformation caused by hygroscopic expansion is small. As a result, the tiles have high flexural strength, resistance to abrasion, resistance to acids and alkalis, are not prone to discoloration and have a long lifespan, and have no visible defects 20 times, thaw in freezing cycles and at minus 15 °C to 20 °C.

The above is about how to choose tiles andTypes of bathroom tilesI hope to help you choose the type of tile so that everyone can find a clean and comfortable way to decorate their bathroom.

You can get it for free

The bathroom in the family is a more humid place in the home, and at the same time, there is more water, so the decoration materials used in these places should be more waterproof and non-slip. So what tiles to use in the bathroom and in the choiceToilet tiles

1.Moisture-proof bricks: The bathroom is moisture-proof, and the tiles are moisture-proof, and they should be selected with good water absorption and will not cause the bathroom to be wet.

2.Non-slip bricks: Tiles are non-slip, more waterproof and moisture-proof, and it is important to have good tiles to ensure your safety.

3.Bright bricks: Bathroom tiles are the best choice because they have little space in the bathroom. Brightly colored tiles provide a visual effect of extending the space.

1.The overall tone of the bathroom.

Toilet tilesIt should match the overall decoration of the bathroom, and the color of the tiles should take into account the color of hygiene products such as sinks, toilets, and bathtubs. AbsolutelyToilet tilesand the color of the floor tiles must be consistent.

2.Consider bathroom lighting.

Secondly, bathroom tiles should also consider bathroom lighting, if the bathroom area is small and there are no windows, the lighting will be dimmed, so choosing bright tiles will illuminate the bathroom lighting.

3.Consider slip resistance.

In order to ensure the safety of passengers, such as toilet tiles, anti-slip properties should be considered: so there are rough matte tiles, tile surfaces, various patterns, and good anti-slip effects.

4.Consider absorption.

Bathroom steam, floor tiles can completely prevent bacteria from breeding, bacteria absorb moisture, the wall is often relatively large, especially in the bathroom shower area, water, steam droplets, so choose tiles with good water absorption.

5.Consider easy to clean.

So you should consider choosing a good clean tile, such as should be cleaned frequently, we all know that the bathroom is the most receptive to dirty and dirty places, and the toilet is often bathed: glass brick tiles are very common in the bathroom.

6.Consider the quality of the tiles.

When buying tiles for the bathroom, because you can choose high-quality brand tiles, big-brand tiles are durable, non-slip, and try to absorb moisture. Don't try to buy cheap tiles to avoid future maintenance problems.

The bricks of the bathroom must first be waterproof and non-slip. This is the most basic condition, as the bathroom is very damp and often comes into contact with water, and there is more water on the floor. If the slip is not good and it is easy to fall, then when buying bathroom tiles, it is best to know a few things first.

It's even better if you master some shopping skills. Here is a detailed explanation of what bricks to choose and how to buy bathroom tiles.

What kind of bricks are good for the bathroom?

First, moisture-proof bricks.

When it comes to moisture-resistant bathrooms, you can choose tiles with low water absorption. Since the bathroom is a relatively damp place, it is essential to use it when choosing a bathroom tile. The water absorption rate is extremely low.

Second, non-slip bricks.

Because the bathroom is more humid, it is particularly easy to fall, so it is important to consider the non-slip performance when choosing a bathroom tile. It is better to choose full-body bricks or glazed tiles. Both bricks have strong anti-slip properties.

Three, hard and dirty bricks.

The bathroom is a relatively easy place to get dirty, so we have to consider hard-loading and dustproofing. It can be seen that when buying bathroom tiles, it can be judged by the appearance glaze. The thickness of the layer should distinguish the quality of the tile, the appearance of the tile can be scraped with a hard object, and if there are scratches, it indicates that the tile is not hard-mounted.

How to buy bathroom tiles.

First, the degree of glazing on the brick surface.

How to judge the glaze degree on the brick surface, you can scrape the appearance of the brick with a hard object. If there are no scratches, then if it is not hard-mounted, pay attention to some unglazed floor tiles, these floors are usually not suitable for laying in a damp, closed environment. This is because the holes above the bricks absorb moisture and cannot disperse, which will lead to mold growth.

Second, water absorption.

How to see the water absorption, you can use a few drops of water to test, the specific method is to drop the water on the back of the tile, wait for a few minutes, and then observe the dispersion of the water droplets, if it does not absorb water, it means that the water absorption rate of the tile is low, and the quality is very good.

Third, texture density.

How can I observe the density of the texture? You can manually tap the tile and listen to the sound. If the sound is crisp, the texture density of the tile is high and the hardness is good. You can also look at the flatness of the tiles from the side to see if there are any unevenness. Pinhole.