Can I use floor tiles to stick to the bathroom wall?

Now in the decoration, the vitrified bricks are often put on the wall, and the standard construction process of vitrified bricks or full-body bricks on the wall is thin paste. In fact, it is really not recommended to put floor tiles on the wall, in the actual construction process, if there is non-standard construction, it is also a very troublesome thing to deal with thin stickers. Once the vitrified brick is puffed up on the wall, the gain outweighs the loss!

Solid color bricks are generally porcelain tiles, glazed matte or soft. The small white bricks that are popular in Nordic-style kitchens are one of them. The small brick itself is not too expensive, but it is troublesome to paste the brick, so the labor cost is high, and the cost of beauty sewing is also high.

If you have a limited budget, only use small bricks in the local area to have the finishing touch.

OK. However, it is best to find a seller designer to design it when buying floor tiles, which can generally be designed for free, and the overall planning will be better. Floor tiles have glazed tiles, matte bricks, and antique bricks, the bathroom wall can be a color can also be made into a color, a color is cheaper, the bathroom is best to buy a lighter color, brighter, greater sense of space.

Ah, it's perfectly fine to use floor tiles to stick to the wall. Because there are a lot of model rooms, in fact, this kind of use is already used. Methods and techniques.

But it is the emperor who pays more attention to it. It is different from the special wall tiles for the bathroom. Be sure to choose a thinner one, and.

The grip is better. Makeup. Carry out.

Combine. Be sure to pay attention when constructing. The ratio of cement and binder.

Yes, but you need to use brick wall glue, thinking that this kind of brick has poor water absorption, and it does not need blisters with ordinary wall tiles.

It's not good, because the floor tiles are all porcelain, they don't absorb water, and they need to be completed by professional and technical personnel, and they need to have a certain amount of technology.

In fact, there was a discussion about whether to paste tiles on the inner wall of the balcony, but in the end I chose not to paste it in order to save some money, and I felt that it didn't matter much whether it was pasted or not, but now I regret it very much when I see that the inner wall of the balcony is about to become moldy.

1. For the fashionable and environmentally friendly choice of the balcony wall, most people should still choose to lay some tiles on the balcony wall. In fact, ceramic tile is a very beautiful and practical wall decoration material, this material has good waterproofness. And it's a perfect match for the walls of the balcony.

If the balcony at home needs to be used to place the washing machine, dry clothes, etc., it is recommended to choose tiles on the wall, and it is recommended to choose non-slip tiles!

2. Three benefits of balcony wall tiling:

First, beautiful. There is a good-looking home, it is very comfortable to live in, and relatives and friends will also have face if they visit.

Second, the interior wall will not be moldy. In fact, many people are the same as my family, eat too much balcony inner wall does not stick to the loss of tiles, cloudy and sunny days are good to say, when it rains, it is really regrettable and want to cry. And the walls are very damp, and if it rains, the walls will definitely get moldy.

3. Health. Generally, families dry their clothes on the balcony, but if the inner wall of the balcony is moldy, bacteria and other germs will follow, and the clothes on the balcony will inevitably be infected with some bacteria.

3. The balcony also needs to dry clothes, so you must cherish it! Tile pasting, in fact, beautiful and trouble-free and once and for all, why wait until there is a problem with the painting and then regret it.

4.The disadvantages of not sticking are also obvious, the wall is very easy to get dirty, and there will be damp problems when the washing machine and faucet are installed. After a long time, it is easy to mold.

Therefore, if the balcony is sealed at home, it can actually be pasted or not, especially on high-rises, and it will not be very humid if it is not pasted. But if you don't seal the balcony, then it's better to put tiles.

It is not recommended to apply floor tiles for home use in the bathroom and kitchen.

The living room brick is generally 800 * 800 vitrified bricks, and the bathroom kitchen is generally 300 * 450 and 300 * 300 integrated bricks (you can also use 600 * 600 vitrified bricks to change the knife, chamfering and grinding into 300 * 600).

Floor tiles are easy to get dirty, which is caused by the uneven pores left by the polished tiles when polishing, which will hide dirt and dirt, and even some tea poured on the polished tiles will leave stains. Later, some of the best polished tiles were added with an anti-fouling layer when they left the factory, but this anti-fouling layer made the polished tiles lose the effect of all-over bricks.

The paste can be pasted, but with such specifications, the wall of the bathroom needs to be larger to look good.

Yes, the floor tiles are required to be higher than the wall, and it is not possible to stick to the wall and the ground.

Totally ok, it should be very beautiful.

I suggest you don't use bare bricks on the wall, polished bricks and cement will clutch after a long time. But if you want to paste 400*800 floor tiles, it is best to use tile glue instead of cement!

Yes, but the effect is not so good, and it is possible to slide very much, be careful, it is better not to use it.

Summary. Can I use floor tiles to stick to the bathroom wall?

FYI.

It is possible to attach the floor tiles to the floor tiles of the bathroom, but there are a few things to pay attention to:

1.Clean and prepare: Before applying new floor tiles, make sure that the restroom floor surface is clean, even, and free of oil, dust, or other debris. If there are old tiles, make sure they are firm and free of hollows.

2.Adhesive selection: Choose a water-resistant or water-repellent adhesive that is suitable for the wet environment of the restroom to ensure that the new tile will adhere durably to the old brick.

3.Tiling method: Use the appropriate tools and techniques to apply tiles correctly. Make sure the tiles are flat, secure, and free of voids to prevent moisture from penetrating under the floor.

4.Sealing treatment: After the tile is finished, it is recommended to seal the tile and tile joints to prevent moisture penetration. Waterproofing glues and sealants can be used to accomplish this.

Please note that although it is possible to attach floor tiles to the floor tiles in the bathroom, if the old tiles are severely damaged, hollow, or have other structural problems, it is recommended that they be repaired or re-installed before the new tiles are applied. In addition, if the floor height of the restroom increases significantly after the new bricks are installed, the height of the threshold may need to be adjusted to ensure smooth switching. For specific construction details and operation methods, it is best to consult a professional renovation master or construction engineer to ensure the quality and durability of construction.

<>1. The bathroom wall tiles can be attached to the ground, because the bathroom floor tiles need to be non-slip, it is recommended to use full-body tiles, glazed tiles, matte tiles, ceramic tiles, etc.; Wall tiles should be made of waterproof materials, and glazed tiles are recommended. Floor tiles and wall tiles are matched to ensure that the decorative effect is consistent in the same environment.

2. The water absorption rate of floor tiles and wall tiles is different: strictly speaking, wall tiles belong to ceramic products, while floor tiles belong to porcelain products, their essence and physical properties are different, whether it is from the selection of clay ingredients or to the firing process. Generally, the water absorption rate of wall tiles is about 10%, which is several times higher than that of floor tiles with a water absorption rate of only 1%.

3. Different places of use: Generally, floor tiles are laid on the floor of the bathroom and kitchen, because of its low water absorption, so that the bathroom and kitchen will not be affected by water vapor, and it is not easy to absorb stains next to Zen. The wall tiles are made of glazed pottery, with high moisture content, so its back is usually rougher, so it is conducive to using adhesive He Teaser to paste the wall tiles on the wall, and the floor tiles are not firmly pasted on the wall, and the wall tiles will be difficult to clean because of the water absorption on the ground, so the two can not be mixed.

4. Pay attention to the laying sequence: the floor tiles are pasted from the inside out, so if the ground has a slope or a floor drain, you should pay attention to arranging the water direction to find the slope; The wall tiles are paved from the bottom up, and for aesthetic reasons, the bottom bricks should be pasted last.