What are the interior decoration wall treatment methods? What to look out for?

The so-called wall scraping putty is for the wall surface of our indoor wall that is coated with cream and wallpaper in the later stage. Before these surface layers are decorated, the putty must be scraped in batches. There are two main advantages of water flushing before batch scraping of surface formation.

Some of the material on the wall can be removed. The adhesion material here refers to the material that we did not scrape clean when we scraped the wall skin. For example, if there is putty on the wall, you can rinse it with water before cleaning it up.

This makes it easy to scrape putty from behind us, and also ensures quality.

The wall is painted in the same order as the latex paint above, but special attention should be taken. 1. Grassroots treatment is the key to ensure the quality of work, and it is the most basic condition to ensure that the wall is completely dry and cracked. The drying time varies depending on the climatic conditions, and it should generally be left to dry for more than 10 days.

2. The coating operation method of latex paint can be hand-sanded, roller-sanded, and spray-sanded. It must be sanded in one direction, the joints are set up, and the brush surface is completed one at a time. The manual grinding material has less loss and the quality is relatively high, but the manual grinding time is long, and it can be combined with the roller brush.

Some of the rough houses are cement walls when they are handed over to the owners, and some are putty walls. When the cement wall is covered, it is necessary to fully check whether the cement wall is firm and flat. If the mortar is not strong, or cracks or cavities appear, it is advisable to ask the developer to remake it.

Each hole can be filled with plaster by repairing it itself. When the flatness of the wall is poor and the error is greater than plus or minus 5mm, plaster leveling should be considered. When the house is a putty wall.

Don't forget to be sure to check if the wall putty is qualified water-resistant putty.

Otherwise, the water-resistant putty must be removed and redone. After the first treatment of the wall, scrape putty and plaster. Be sure to be prepared before scraping putty and plaster.

First of all, make sure that the wall is firm and flat, clean the wall with steel brushes and other tools, and try to avoid the cement wall floating and sinking; Next, use the wall rollers to pass through the concrete interface agent once. I still remember maybe I had to put a patch on the various walls haha. Try to be as homogeneous, and after drying, you can scrape putty or plaster.

The interior wall is basically scraped before decoration, and a lot of dust will be left after scraping the wall skin. For example, scrape putty on the wall, but there is a lot of powder on the wall. At this time, it is difficult for us to clean with a vacuum cleaner, so the best way to dispose of it is to flush it with water.

This will basically clean up the remaining powder on the wall. It is very beneficial for us to scrape putty in the later stage.

The method of wall decoration: there are laying plates, brushing paint, making stone walls, and pasting wallpaper. It should be noted that ventilation should be paid attention to during construction, it should be volatilized for a period of time before it can be moved in, and it should be treated with mildew, and the overlapping layer must be reserved to do a good job of waterproof protective layer.

The wall needs to be inspected first, then the excess needs to be removed, the leveling needs to be carried out, and then the decoration is carried out, and you must pay attention to the choice of materials.

The treatment method is to brush evenly when brushing the interface agent, and in general, kraft paper should be used to stick to the cracks, and when the wall is uneven, it must be leveled; When decorating, we should pay attention to the primer, and be sure to brush it very evenly, so as to ensure that every side of the wall can be brushed, and do not add too much water when brushing the topcoat, which will affect the thickness, feel and hardness.

In the decoration process, the treatment of the wall is a very critical step, and the following are several issues that need to be paid attention to in the wall treatment:

Base treatment: Before painting or pasting wallpaper, the wall needs to be treated with a base layer. This includes operations such as cleaning, filling cracks, and applying plaster. If the wall surface is uneven or damaged, it needs to be sanded with a sander to ensure that the wall surface is smooth.

Paint selection: When choosing wall coatings, you need to consider factors such as material quality, environmental performance, and decorative effects. It is recommended to choose high-quality products to ensure long-term stable aesthetic and environmental results.

Prevention of cracking: When applying wall paint, it is necessary to pay attention to prevent cracking of the wall. In general, the walls should be painted in at least 2-3 layers to achieve the desired effect, and the interval between each layer needs to be dry enough.

At the same time, before construction, you can use professional sealing glue or paste anti-crack net to carry Tong Peixing prevention.

Precautions for pasting wallpaper: If you choose to paste wallpaper, you need to pay attention to the pattern, color matching and size matching of the wallpaper to ensure the fit. When pasting wallpaper, you need to treat the wall first to avoid problems such as bubbles or wallpaper falling off.

Pay attention to the waterproofing of the bathroom wall: The wall of the bathroom needs to be waterproofed to avoid moisture penetrating into the brick joints and causing cracking and dampness. It can be treated with waterproof paint or waterproof tape.

In short, in the decoration process, the wall treatment needs to pay attention to the base treatment, paint selection, cracking prevention, wallpaper precautions and bathroom wall waterproofing. If you are not sure how to treat your walls, it is advisable to consult a professional renovation company or technician.

The treatment methods of decoration walls are generally plastering, scraping putty, sand repair and brushing paint. The materials used for plastering walls are convenient and suitable for the interior and exterior walls of general buildings. However, the on-site workload is large.

Plastered walls are usually constructed of a screed layer and a surface layer. The screed can be used with lime mortar in the dry part and cement mortar in the wet part, with a thickness of about 10 18 mm. Scraping putty is one of the methods of interior wall decoration, scraping putty on the wall to ensure that the wall surface is flat.

Generally, scrape three times, and after drying, polish it with sandpaper. This step is carried out before the latex paint is applied.

The exterior finish of the wall is divided into indoor wall and outdoor wall. Wall decoration is an integral part of architectural design. Modern indoor walls use changes in color and texture to beautify the indoor environment, adjust the illumination, and choose a variety of materials with easy cleaning and good physical properties to meet the multi-faceted use functions.

The exterior wall directly affects the appearance of the building and the appearance of the city, and materials with certain waterproof and weathering resistance should be selected according to the use requirements and technical and economic conditions of the building itself to protect the wall structure and keep the appearance clean.

The use of high-quality clay bricks or natural stone masonry walls, which already have a rustic appearance and good weatherproof, anti-pollution performance, can not be used as a wall, this kind of wall is called a clear water wall. The clear water wall should be treated neatly and densely with ash joints to prevent rainwater from leaking. If the concrete wall is poured with a special formwork, the wood grain or various concave and convex geometric patterns are left on the exterior wall after the mold is removed.

Artificial stone slab walls.

Fake stones, terrazzo, brushed stones, colored porcelain grains, etc., which are used as plastering finishes, can be prefabricated into panels for veneer. Its fixing method is the same as that of granite slabs and marble slabs. When using granite, hollow ceramic slabs, and heavy blocks with a thickness of more than 35 mm for the wall, the method of wrapping should be adopted, and hooks, screws or other connecting parts should be used to firmly combine the blocks and the wall, the blocks and the blocks.

When we receive a new house, we need to decorate it. Of course, it is also important for the decoration of the walls. The decoration of the walls is also a priority.

So,How to deal with the decoration wall at home？What is the method of decorating the walls?

How to deal with the decoration wall at homeThe surface of the cement wall is first brushed with a gypsum interface agent, also known as a gypsum interface adhesive, also known as gypsum plaster. Use 2 yuan per bag 20 yuan per kilogram, 40 yuan per piece, thin coating on the cement wall, made at the interface, cement separation, 100 yuan for the wall.

2. Leveling, using gypsum interface agent, to make yin and yang angles, it can apply a thickness of 30-40 mm, and polish with 320 mesh sandpaper. It's mandatory, it can't be preserved, it used to be polished by craftsmen, it's not, each process is different. Once the sanding is done, you can clean it.

3. Batch a batch of waterproof putty (waterproof putty is 600 mesh), polish it with 600 mesh sandpaper, and then polish it in the next process.

4. You can paint latex paint twice. The spraying effect is better, but you should decorate the putty in the epithelium of the waterproof putty (barrel putty), spray a thin layer and sand it with 1200 grit sandpaper. Respray latex paint and apply only the finishing layer.

If it takes a long time, you don't need to shovel it to repair it, just spray it.

Method 1: Latex paint brush.

This is a simple and common way to decorate your wall. As a rule, it is the surface treatment of the walls, leveled with putty, softened and smoothed, and then brushed with latex paint. Latex paint is currently the mainstream of wall treatment.

The intersection of the upper and upper surfaces is made of gypsum wire, and the lower part of the excavation that crosses the ground is closed with a base line. The treatment is simple and straightforward, the room is spacious and bright, but nothing changes. It can be decorated with frames, **, tapestries, etc., equipped with spotlights.

It must be remembered that many industrial paints are more or less toxic. Attention should be paid to ventilation during cracked construction. Once the construction is over, you must wait at least a week for it to evaporate before you can move in so as not to harm your family's health.

Method 2: Paste wallpaper.

After leveling the surface of the wall, place the wallpaper. Its colors and patterns are abundant. You can clean the new wallpaper directly with a damp cloth. It is very convenient to paste the new wallpaper directly.

Here's what we've introducedHow to deal with the decoration wall at home

You can get it for free

The operation process of wall decoration is more complicated, there are several kinds of raw materials, and the actual effect is different for different types. If you ask what is more difficult to manipulate in interior decoration, I believe that many friends will vote for the wall and want to install a simple white wall, but who would have thought that this is assembled as a cheap house for rent, and can't help but feel that it is really difficult to assemble the wall! In fact, no matter how you decorate the design, everyone wants to decorate the most beautiful wall with the least estimate, <>

To remember how to choose the raw materials of this wall, first master the characteristics of this raw material, the first will be the wallpaper wallcovering such raw materials. Wallpaper decoration design used a lot, the color of the wallpaper can match a variety of design styles, simple engineering construction with glue, if you don't like this kind of color in the late stage, it is very easy to replace. First of all, if you want to be simple and cost-effective, the best choice for many friends is wall paint.

Latex paint comes in a variety of colors and can be matched with a variety of interior decoration styles, but many people will be mostly asked what shade to paint when decorating. Because there are hundreds of shades of the color card map of the wall paint, the color cast is not large, and the name is also silly and confused, which is simply more difficult to choose than a blush.

The board wall is also known as the overall wall, so the raw materials should be pressed into the skin with sawdust and bamboo powder, and the appearance is like a wooden board. But the main disadvantage is that it is more afraid of bumps, if you accidentally bump and bump there will be pits, this kind of repair is very difficult, unless it is all the slab wall replacement. Relatively speaking, the cost is relatively high.

The tone of London fog looks very retro and fashionable, and the sense of hierarchy is also very high, generally used for fabric sofas and TV background walls in rooms, with refreshing country style, the color of the background wall is generally not turned, and it is the choice of many customers this year.

The wallcovering and wallpaper are basically the same, and the construction method is the same, the difference is that the wallpaper is paper, and the wallcovering is cloth. There are also many color choices for wall murals, and the layering of wall murals is stronger than that of wallpaper. These raw materials are more environmentally friendly.

The only adhesive we should be aware of is super glue. If we choose shoddy super glue, the evaporation of indoor formaldehyde stuck in the wallpaper wallcovering is very slow. There are also wallpaper wall coverings, which are very easy to expand and shrink if the construction of the project is not very good.

In the process of wall decoration for family education, the putty should be scraped first, the wall should be leveled, the leveling should be brushed waterproof, and finally the latex paint or diatom mud should be painted.

You need to choose the right decoration materials for processing, you can choose to use wall cloth, you can also choose to use wallpaper, according to your own style to choose.

I think it's best to choose wallcovering for decoration, and if you have a good budget, you can use solid wood for wrapping.

Don't beat putty too thick at once, and if you need to hit thick places, hit it several times. If it is too thick at one time, the wall is easy to be empty, and it is easy to peel or crack after painting the wall paint.

We generally scrape the white here, and then brush the latex paint, I feel that the big white is wasted in it? Can you save some costs, such as using cement to smooth the wall and then directly brush latex paint, or there is a saying on the Internet to wipe putty, and then brush latex paint, I don't know if putty is better and cheaper than Dabai? I don't like Dabai personally, because there are always small insects in the family, and if I accidentally touch it, it is a pit, which is not strong enough.

There is a way to paint directly on the original wall, irregular patterns, picture frames == unique art (the only disadvantage is that it is easy to scratch) Note: This is what people in the art industry like.

Latex paint can not be directly touched on the wall It takes a lot of steps Big white and putty is the base treatment of the wall before brushing latex paint, it must be done before brushing latex paint, the specific steps Blank wall Brush 1 time interface agent Crack treatment Leveling (including yin and yang angle straightening) Patch Scrape 2-3 times putty Grinding Primer Repair polishing (the place to make up must be made with primer and then 1 time) Two topcoat maintenance, in fact, brushing latex paint is very complicated.