How to renovate the old solid wood floor, how to renovate the old solid wood floor

The steps for refurbishment are as follows:1. Before the renovation of the old floor, ensure the cleanliness of the house and remove all the items in the house.

2. Polishe off the original surface of the floor by 1-2 mm.

3. Then scrape putty, color, paint, wax and polish. We should pay special attention to the step of painting, generally brush the primer once, twice the topcoat, and brush the primer several times when there are defects on the surface of the floor.

As far as the types of flooring on the market are concerned, laminate flooring cannot be renovated, while multi-layer solid wood flooring has different surface thicknesses, and the thickness of the thin skin is generally about millimeters.

Hardwood flooring is a high-grade flooring material, but over time, old hardwood flooring may become worn out, faded, or need to be replaced.

Refurbishing old hardwood flooring can improve the quality and longevity of the floor, while also increasing its aesthetics and maintaining its original cultural and historical value.

Here are a few steps to renovate an old hardwood floor:

1.Measure and clean.

Before you start renovating your old hardwood floor, you first need to measure and clean it. Measure and calculate the size and width of the floor so that the required materials are prepared in advance.

When cleaning, the floor needs to be thoroughly swept with a mop or vacuum cleaner with a sail to remove old dust and dirt.

2.Sanding. Sanding is a crucial step in the renovation of flooring. After removing the old paint and dirt on the surface of the old solid wood floor, use coarse sandpaper to sand the larger particles, and then use the fine sandpaper to fine sand.

3.Repair defects.

If the old hardwood floor has breaks, cracks or grooves, it can be filled with wood filler. After the filling is completed, the surface needs to be lightly sanded with fine sandpaper to make the floor surface smoother.

4.Paint. After sanding and repairing is complete, the old solid wood floor needs to be freshly painted. Pay attention to the color and quality when choosing the paint to ensure that the new coating matches the color of the old floor.

5.Apply protective paint.

After the old hardwood floor is newly painted, it needs to be painted with a clear protective paint. Protective paints can protect the surface of the floor from daily wear and tear and damage, and you can also choose a protective paint with a waterproof function to protect the floor from damage in an environment with a lot of moisture.

In short, renovating old hardwood floors requires a certain amount of skill and experience, and it is recommended to ask a professional to do it if you are not good at it. The renovated old hardwood flooring will be more beautiful and durable, while maintaining the original cultural and historical value.

Old wood flooring is a unique and reminiscent and historical flooring, however, with time and long-term use, old wood flooring will gradually wear out, discolor, or crack and other problems, and this is when it needs to be renovated. Here are the steps and tips for renovating old wooden floors.

Step 1: Sweep the floor.

The first thing that needs to be done is to sweep the ground thoroughly. The purpose of sweeping the floor is to remove dust, garbage, and other debris from the ground and ensure that the surface of the floor looks clean and tidy.

Step 2: Repair cracks and damaged parts.

Secondly, inspect the floor for damage or cracks, and if so, repair them first. Use professional tools and floor patch materials to repair cracks and damaged parts to ensure that the floor surface is smooth and level.

Step 3: Sandpaper sanding.

Next, you need to use sandpaper to sand the ground. The thickness of the sandpaper depends on the material of the floor and the degree of wear. Usually from grit40 to grit180 gradually, you need to pay attention to the switching and direction of each roller in the process, so that the texture and color on the ground are more uniform.

Step 4: Clean the ground.

After sanding, the ground needs to be cleaned of dust and wood chips. Floors can be cleaned using a vacuum cleaner and a cloth.

Step 5: Coloring and glazing.

Finally, the ground needs to be colored and varnished. The process of applying color can be carried out using floor colorants and floor protectors, which can increase the durability of the floor. Floor wax can be used for varnishing and polished using a floor polisher to maintain the floor finish.

During the whole process, it is necessary to pay attention to maintaining the temperature and humidity of the ground to avoid warping or cracking.

In short, renovating old wood floors requires attention to details and technology, and only by ensuring the quality of the ground can the renovated old wood floors be more durable, beautiful and artistic.