What are the accessories for the bar chair? How to install a stainless steel bar chair?

Hello, there are a total of 7 accessories for common bar chairs, and the 7 accessories are the seat surface, the one-piece support, the air rod, 4 screws, the anti-skid plate, the non-slip mat, and the bottom plate.

The installation is also quite simple, first of all, it is necessary to connect the seat surface, anti-skid plate, and one-piece support, and then fix it with 4 screws, and then connect the air rod and the anti-skid plate, and then connect the air rod and the one-piece support, and then add the non-slip mat.

Hope it helps you and everyone!

What are the bar chair accessories? The bar chair we often see has a liftable function, and the natural lifting lever is one of the bar chair accessories; The horn site can play a good stability; Many chairlifts have a hidden danger, so explosion-proof gas pole accessories are essential; The chair tray plays a role in controlling the height; Foot pegs, shrimp feet, wheels, etc. are all accessories for bar chairs. Bar chair installation method Steps:

1. Put the chassis flat first, and the decorative ring is sleeved on the chassis, 2. Put the thick end of the gas rod into the chassis through the decorative ring, 3. Match the back of the seat surface upwards, align the tray hole with the stool face face, install four screws with a screwdriver, 4. Take the seat surface, and put the installed chair surface into the gas rod 5 Precautions for installation completion: The seat surface hole must be aligned with the tray hole, otherwise the screw will not be tightened firmly After the installation is completed, the tray handle will be shaken a few more times, otherwise the air rod lifting is easy to get stuck and affect the lifting of the gas rod.

Desks, chairs and chairs installation is familiar to us, there are some small offices that need not many chairlifts, not bulk purchase and installation is not necessary to ask furniture installers to help, do it yourself, then teach you a trick to let children's shoes complete the chairlift installation process in 5 minutes.

Clause. First, it is easier to understand the structure;

No matter what kind of furniture, you need to check the construction diagram of the furniture in advance, and also understand the different parts, the names of the parts, and so on.

Clause. 2. Install the tripod;

The tripod installation is divided into two steps, the first step is to install 5 pulleys first, generally there is a very long screw at the bottom of the pulley, which can be specified on the five-star tripod if tightened, and then the second step is to connect the tripod with the lifting rod, and directly embed the thick end of the lifting rod into the hole in the middle of the tripod to complete the installation of the tripod.

Clause. 3. Install handrails;

The armrests of this chair lift are directly fixed with screws, first flip the cushion to the back, directly align the armrests at the screw holes on the ground, and then use a screwdriver to screw the screws into the holes to fix the armrests, and the armrests on both sides operate consistently.

Clause. 4. Assemble the backrest and connecting steel bars.

1. Place the back of the backrest flat, and then align the end of the connecting steel strip with the screw hole of the backrest.

2. Then use screws to fix the connecting steel strip on the back surface of the backrest.

Clause. 5. Assemble the backrest and pillows.

1.Align the rails behind the backrest with the rails behind the pillows and secure them with screws.

2.Then there is a large screw hole in the middle of the backrest, which needs to be fastened with a large screw, so that it is possible to assemble three sets of backrests (backrest, pillows, connecting bars).

Clause. 6. Connect the complete backrest three-piece set and cushion.

1.Connect the modular seat cushion to the modular backrest three-piece set and insert the steel bar of the backrest into the cushion hole.

2.Then tighten the adjuster under the cushion.

Seventh, connect the cushion with the scaffolding;

After the upper part of the pillow, the back, the armrest, and the cushion are connected, it can be combined with the lifting rod of the scaffold. It's that simple.

Since the parts of the office chair lift are very easy to connect, it is easier to install them independently.

<>1. a chair seat. The chair seat must conform to the three-degree curved surface of the human body curve, the curved chair seat can increase the contact area between the bottom surface of the thigh and the buttocks and the chair seat, so that the pressure is evenly dispersed, so that it will not be concentrated at a certain point, and at the same time, because it is slightly tilted, it also has the effect of stabilizing the pelvis, avoiding sliding forward when sitting, in addition, the rounded seat chain design can also reduce the friction and contact between the inner side of the knee joint, which is greatly beneficial to health.

2. Accessories. When buying a bar stool, be sure to check whether its accessories are installed reasonably. For example: whether the valve switch is flexible, whether the pulley is smooth, whether the turntable rotates naturally, etc.

3. Size. The size can be selected according to the height of the mountain, and if you are shorter, of course, you need to measure your own height, and don't be deceived by the beautiful style of the bar stool. Only what suits you is the best.