What are some ways to prevent water from entering the bathroom lights? Have you learned?

Add a layer of air protection, add a layer of glass doors to the part that needs to be used with water, and choose a lamp with a protective layer. In our rapidly developing society, electricity safety has become an important part of our lives, especially for the hot summer, many of us like to take a cold shower, when we are irritable at the same time, it is difficult to notice the safety of electricity, we are not careful, not only will have a certain impact on the bathroom lights, but also endanger our health.

1. Add a layer of air protection.

When we install lights in the bathroom, we choose to add a layer of air protection to the outer layer of the lamp, which can not only prevent the lamp from being stuck to water and prolong the life of the lamp, but also maintain our health, so that we can use it healthily, especially in the bath at the same time, we can also have a safe and enjoyable experience.

2. Add a layer of glass doors to the part that needs to be used.

It is inevitable to include many parts in the bathroom, among which bathing is essential, we basically have to wash every day, when the weather is hot, we will even choose to wash countless times a day to relieve a certain heat, so it is very necessary to add a layer of glass door in the bathing part, which can perfectly avoid the possibility of the lamp being infected by water, and also protect the safety of electricity, so that we can have a better experience, so as to be able to use the bathroom healthily.

3. Choose a lamp with a protective layer.

When we choose the lamp in the bathroom, we can directly choose the lamp with a waterproof protective layer, so that after installation, we don't have to worry about sleeping into the lamp, so that the lamp with a protective layer can protect a lot of things, which is very necessary for us, because although we do not touch the water on the lamp, when we wash, it is inevitable that there will be heat to dissipate, which will infect the lamp and have a certain impact on the lamp.

1. To prevent water leakage in the bathroom, it is necessary to do a good job of waterproofing. 2. The leakage of the bathroom should be clearly distinguished, whether it is a leakage of the water pipe buried under the ground or a leakage of water from the ground. 3. If the pipeline leaks, a way to scrap the pipe and make a new open pipe, or the quality of the bulb and the large humidity of the bathroom, the humidity will cause oxidation of the lamp holder and the lamp head and then produce contact resistance, the contact resistance will produce a large current, and the current will be easy to damage the bulb, so it is recommended that you change the lamp holder at the first point.

1. Install the exhaust fan.

For the ventilation of the restroom, the most common is to install an exhaust fan to exhaust the turbid air in the room to the ventilation pipe. 2. Install an air heater with fresh air function.

If your bath bomb is only used for heating in the bath, it will be a waste! There are two kinds of bath bombs: lamp warmer and air heater, if your home is a dark guard, it is highly recommended to use air heater bath bomb.

What are some ways to prevent water from entering the bathroom lights? Have you learned?

Take off the cover and pour it out, wipe it clean with a cloth, only the correct installation of the bathroom scattered touch ceiling lamp, in order to ensure the waterproof effect of the bathroom ceiling lamp, when installing the bathroom ceiling lamp, it is also very necessary to master the correct installation method of the bathroom ceiling lamp, the installation of the bathroom ceiling lamp should ask a professional installation master, so that the bathroom ceiling lamp can be better installed, not only let the bathroom ceiling lamp play a lighting and decorative effect, but also have a good waterproofness.

We need to pay attention to the choice of lamps and lanterns in the decoration process of the bathroom, we should have experience, the bathroom will produce a lot of water vapor in the bathing process, if the lamps and lanterns are not selected or not treated well, it may cause the bathroom ceiling lamp to enter the water; Bathroom lamps and lanterns to avoid water ingress We have to consider the design and construction from two aspects, because the construction is carried out according to the design, so both are indispensable. Let's first take a look at the problems that need to be paid attention to when choosing lamps and lanterns in the decoration design of the bathroom, many designers only consider whether the decoration effect is good or not, and most designers ignore the operability of the design, resulting in a lot of problems left in use.

Bathroom is one of the key points of bathroom lighting design, not only to consider the aesthetic effect, but also according to the characteristics of high humidity in the bathroom to choose a reasonable selection of lamps, such as when we choose lamps and lanterns with waterproof performance, as well as switch sockets. , but also choose a waterproof function; When designing the lamps and lanterns in the bathroom, we should take into account the problem of condensation, because most of the current bathrooms are integrated ceilings, and the materials of the integrated ceilings are basically aluminum, and the satisfaction of metal materials is the easiest to produce condensation in the hot air, and the condensation water may enter the lamps along the ceiling board if the lamps and lanterns are not well designed. Therefore, in the design of bathroom lamps, the material and installation of the ceiling should be considered to prevent condensation from flowing to the lamps as much as possible.

Through the above quality control of design and construction, we believe that we can do a good job in the waterproof and moisture-proof problems of bathroom lamps.

Your toilet is integrated with a suspended ceiling, and the lamps and lanterns are formed into a complete set, and there will be no water in the lamps and lanterns.

The above is a personal point of view, for everyone to exchange and discuss, if there is any shortcoming, please leave a message to discuss and correct! Finally, please pay attention to the home improvement altar and give the home decoration altar a lot of favorite comments**, thank you very much! Keep it ventilated, because water can't get in, and lights can't get in.

Maintain ventilation. I've never heard of anyone blowing out a light bulb with water vapor!

How to design the bathroom to avoid water in the chandelier, first of all, it can be avoided in the selection of materials, and try to choose a chandelier that is not easy to enter the water, or a waterproof lamp. Secondly, when carrying out suspended ceilings, it is best to do a good job of waterproofing engineering.

First of all, it is necessary to choose the right lamps, refer to the layout of the bathroom before designing, it is best to paste tiles on the wall, pay attention to the treatment of the waterproof layer, and ask a professional installation master to install the ceiling lamp.

Dry and wet separation should be done well. You can choose to use a special waterproof material to cover the chandelier, so that you are not afraid of water entering the chandelier.