-
It is necessary to find the cause of the water leakage first, and then choose the appropriate maintenance method according to the cause of the water leakage.
-
The lamp port is used to turn on electricity, and the water leakage is dangerous, so you have to find the upstairs reaction to see if it is a water leak in the upstairs bathroom.
-
The bathroom light repair method is as follows:
Tools: screwdrivers, new lamps.
1. Turn off the power at home.
Press and hold the switch of the light and turn off the light in the bathroom. Then find the distribution box in your home and turn off the switch where the bathroom light is placed. If you don't know which door the lamp belongs to, you can turn off the main switch in the home.
2. Take off the lampshade.
After removing the lampshade, we can see the lamp tube, and everyone tears the lamp buckle and takes out the lamp. Then use a screwdriver to loosen the screws at the terminal end of the fixture and remove the power plug.
3. Choose the right lamps.
The mounting hole of the lamp holder can be measured with a ruler, and the LED panel light of the appropriate specification can be selected according to the size of the hole. The bathroom is relatively humid, so when choosing a panel lamp, you should choose a lamp that is waterproof.
4. Install lamps and lanterns.
Remove the ballast from the lamp, strip part of the insulation skin of the ballast and power cord, wrap them together, and wrap them with electrical tape. Then fix the buckles on both sides of the panel light, insert the plug of the LED light board into the ballast wiring, and place the ballast in the ceiling. Finally, press the panel light clip vertically upwards to place the panel light in the mounting hole.
Precautions for installing lights in the bathroom
There should not be too many bathroom lights, and incandescent lamps should be used for the overall lighting, and soft brightness is preferred. Moreover, next to the make-up mirror in the bathroom, independent lighting fixtures must be set up as a supplement to the local lighting, and fluorescent lamps can be used for local lighting in front of the mirror to increase the feeling of warmth, spaciousness and freshness.
The toilet has always been relatively humid, so in the selection of toilet lamps, moisture-proof, safe and reliable glass or plastic sealed lamps should be the mainstay. In addition, in the shape of the bathroom lamp, it should not be too complicated, it is not suitable to decorate the bathroom with complicated lamp types, and the position should not be too low to avoid accidents.
-
If the lamps in the bathroom at home are damaged by moisture, it will affect daily use. How to repair the broken bathroom light? Let's take a look.
If there is a problem with the toilet light, the first thing you need to turn off is because we want to make sure that the light is changed safely. If there is a problem with the ceiling lamp, connect a few lamp beads through wires. If it still doesn't light up, it means that it is a problem with the bulb, and choose the same model bulb to replace it back.
Remove the cover and replace it with a new bulb. In addition, it is necessary to check whether some parts of the lamp are faulty, such as the circuit of the lamp is damaged, or the ballast has a dead crying obstacle. If there is a problem, it will be fine to replace it accordingly.
There is a circuit module inside the LED lamp, called the LED driver, which is the device that drives the LED lamp beads to emit light. Its structure is more complex, and in a humid environment, it is also prone to failure, such as a capacitor breakdown, coil burning, etc., are possible. If this LED driver fails, naturally the LED light will not emit light.
Due to the high humidity of the bathroom, the home and lamps are easy to get damp and regret. What is the reason for the bathroom light to be broken? Rilong decoration will take you to understand it.
First of all, the switch of the kitchen and toilet is more frequent, it is recommended to buy Philips, Osram, Opple and other big brands of LED to buy a little more. Kitchen and bathroom lights are used more frequently, so they are easy to break.
Secondly, the humidity in the bathroom is high. Please check if there is a small black dot in the middle of the LED chip. If anything, the LED chip burned out.
Analysis of lamps without water vapor. Because you know that the moisture in the bathroom is very heavy, you should first check the removed lamps to see if there is any moisture in them, which is not caused by moisture. If the LED driver is not a sealed waterproof driver, please open the LED driver housing with a blade or screwdriver and check whether there is moisture on the LED driver circuit board and electronic parts, if it is a waterproof driver, please skip it and check whether there is moisture on the LED chip.
How to replace the bathroom ceiling light if it is not on.
1. Replacement of recessed ceiling lamps in the bathroom.
Nowadays, many family bathrooms will choose integrated ceilings, because a plane is very simple and good-looking, so the installed ceiling lamps are generally embedded ceiling lamps. How should I replace the recessed ceiling lamp when there is a problem? The first thing is to close the corresponding power valve, generally the lampshade of the embedded ceiling lamp is stuck by the spring clip, so you only need to press it down and then gently break it off to remove the lampshade.
After that, you can replace the bulb and install the lampshade back on.
2. Replacement of the round ceiling lamp in the bathroom.
The first thing is to close the power valve corresponding to the bathroom ceiling lamp to ensure that the replacement work is in a safe condition. The second is to use a screwdriver to remove the fixing screws on the ceiling lamp, and then rotate the lampshade of the ceiling lamp to remove. After that, you can replace the broken bulb of the ceiling lamp, and then install the lampshade of the ceiling lamp back after completion.
-
Here's how to repair a broken bathroom light:
Turn off the power and check the cause.
Turn off the power supply, and even more so if it needs to be replaced or repaired.
If the bulb or tube is broken, you can replace it yourself.
If the lampshade is broken, find a professional master to replace the installation.
If there is a problem with the line, find a professional master to repair or replace it.
In short, the renovation and maintenance of the bathroom lamp needs to be dealt with accordingly according to the specific situation. If you are unsure about your maintenance skills, you should seek the help of a professional master to avoid possible risks and safety hazards.
-
Once the light in the toilet at home is broken, you need to find a way to repair it. How do you fix a broken toilet light? PChouse will take you to find out.
1. Turn off the power. Because there is moisture in the bathroom, you find that the light in the bathroom is broken, and you should turn off the power. When checking, turn off the power. When replacing and repairing, the power should be turned off.
2. Check what caused the bathroom light to be broken. You should turn off the power first, and if you have some relevant knowledge, you can check it yourself. Otherwise, it is necessary to ask a professional electrician to check it.
3. If the bulb or tube is broken, you can replace it by yourself. If you find that only the bulb or tube is broken, turn off the power, or you can replace the bulb or tube yourself.
4. If the lampshade is broken, you should find a special master to replace and install it. The lampshade is broken, and it's a little more complicated. So, you have to ask an electrician to take care of it. Be sure to turn off the power before handling.
5. If you find that there is a problem with the line, you should find a special master to repair or replace it. If the line is broken, it must be more complicated. Turn off the power supply, and a professional electrician will help you get it right.
-
2.Check the wires: If there is power at the electrical outlet, then check the wires in the circuit for damage or short circuits. If the wire is found to be damaged, it needs to be replaced.
3.Replace the bulb: If you are sure that the circuit and wires are not damaged, then you can replace the bulb of the toilet light. Before replacing the bulb, the power needs to be turned off to avoid electric shock.
4.Buy a new light bulb: If you're not sure how to replace a light bulb or don't want to replace it yourself, then consider buying a new toilet light.
5.Contact a repairer: If you're not sure how to repair your toilet light, or if you need more technical support, you can contact your local repairer or rubber removal service provider for repair or replacement.
Please note that when repairing or replacing portable toilet lights, make sure to follow the safety procedures to prevent electric shock or injury.
You can replace the floor drain of your home, the sinks you said are relatively shallow, which refers to the more common shallow water seal floor drains, and the current floor drains have other anti-odor floor drain products, the principle is different, there is an anti-odor core. >>>More
The sewer pipe on the top of the bathroom belongs to the upstairs owner, who uses the real estate of the downstairs owner for drainage, and it is clear that the upstairs owner should be responsible. According to Article 92 of the Property Law of the People's Republic of China, if the owner of immovable property uses adjacent immovable property for the purpose of using water, drainage, passage, laying pipelines, etc., it shall try to avoid causing damage to the adjacent immovable property owner; Where damage is caused, compensation shall be given. >>>More
The leakage of the upstairs bathroom can not be waterproofed from the top of your bathroom, because this cannot fundamentally solve the problem, that is, the leakage point upstairs is not solved, and may even cause the area of water leakage to increase. It is recommended that you 1. Go upstairs to find the leak and solve it first. >>>More
It is inevitable that there is a leakage in the building, first explain to the downstairs, said that it will be solved as soon as possible, quickly stop the main water valve, find the leakage source, and then find a waterproof or plumber to make up the leakage, and then do a test of the water, go downstairs to see, negotiate if the loss caused to the downstairs will coordinate to give a certain amount of compensation, anyway, they are neighbors, it is not good to make a stiff.
The floor tiles and wall tiles of the bathroom have been tangled for a month, and the merchants who sold bricks have been tossed several times in the middle, either the size is not right or out of stock, and the deposit is returned, and they are tired, which god gives some advice, small apartment, no design company and no designer to draw, all rely on their own imagination, refer to a lot of Sumitomo's drawings, or can't settle down, to blow up wow, the first self-installed house, I'm afraid that the effect I want can't come out.