-
The biggest skill of the first point is to use this cleaning essence to clean it, the second point is to scrub it vigorously, so that it can be cleaned very cleanly, and the third point is that you should filter it with cleaning essence every day, which is the best skill.
-
Install the seal between the toilet outlet and the floor drain. After installing the toilet, you can lay glass glue around the bottom and connect the water inlet pipe to test the water. The toilet is installed.
The ground sewage pipe must be flat, and it is best not to sink under the porcelain plate, so that there will be no water seeping downstairs, and the place to be played must be kept dry and clean when playing glass glue.
-
Brush the toilet regularly, both inside and outside, clean the trash basket next to the toilet frequently, try to sit on the toilet to urinate, and don't squat on the toilet.
-
In the decoration of the small bathroom, assembling the toilet is a very important thing, if the installation is not in place, it is very easy to seep water and return odor, which has a certain impact on life. In order to save workers' costs, some families may do it themselves, although through learning and training, they have a certain understanding of the installation process and can be installed smoothly, but it is easy to ignore some details and problems, resulting in some difficult situations later. Then the next step will be a detailed explanation of the common problems of toilet assembly.
1. Pay attention to the size of the toilet.
Although this has no relationship with the installation of the toilet, it in turn affects the assembly time and marginal benefit. The more common toilet size is 300mm, 400mm, before buying a toilet, you must first understand the size of your own toilet toilet, and choose the same model, otherwise the toilet assembly step can not be carried out. If you have to replace the toilet again, it will consume some time and marginal benefits.
When proposing decoration, let workers pre-bury the more common toilet sizes of 300mm and 400mm, so that it will be more convenient to purchase and install. If it is an uncommon toilet size, it is difficult to choose the right toilet.
2. Adjust the level of pavement.
In the common problems of toilet assembly, adjusting the level of the road surface is very important to ignore. Generally, after buying a better and more suitable toilet and a sealed sponge pad, you can gradually install it. It is proposed to carry out a safety inspection of the sewage pipe before using it to see if there is any blockage of waste materials such as fine sand.
At the same time, it is also important to focus on whether the toilet installation pavement is level, if the ground is uneven, the pavement must be corrected first, so that the toilet can be installed firmly.
3. Adjust and check whether there is water leakage.
This is mainly to check whether the water pipes, water storage tanks and other components are assembled effectively, and whether there will be water leakage. Generally, check the water pipes first, and add water 3 to 5 in a simple way to ensure that the water pipes are clean and check for water leakage. Subsequently, the installation of the water valve and the discharge valve is investigated, and whether the installation is flexible, and the airtightness, and whether there will be jamming in use.
When installing, check the drainage efficiency of the toilet, you can install the spare parts in the water storage tank, fill it with water, and then try to flush it to see how the situation is.
4. Tips for minor problems.
When using the toilet, do not pour mixed mortar in the front cavity of the toilet or other to prevent the cement from condensing and surging and harming the toilet. In addition, special attention should be paid to the toilet bowl should not be applied within 0, otherwise the water will freeze, which will have a certain impact on the toilet. In order to avoid water seepage or damage to the toilet, try not to bump it with a hard block.
-
After installing the bottom and body of the toilet, we need to install accessories such as the water tank. The water tank is the key to whether the toilet is leaking, so you must pay special attention to the unblocking and sealing performance of the water tank when installing.
-
The position of the groove around the water pipe is easy to seep water, so it is necessary to fill the surrounding area without water leakage or glass glue to avoid water seepage, anti-odor and insects in the later stage.
-
First of all, the location of the toilet should be placed in the bathroom, and a smart toilet should be installed, and a bottle of water should be placed in the internal structure of the toilet.
-
In bathroom decoration, the toilet is indispensable (spitting: why not call it a bathroom), so do I know how to choose a bathroom? Many people may think that toilets are the same, but some toilets are not easy to clean after they are bought.
Today I will introduce you to three issues that you must pay attention to when buying a toilet seat.
Now that the market is getting bigger and bigger, it is inevitable that there will be some black-hearted merchants and few. In order to reduce the cost of staleness, some toilets that are too light in weight are put into the market for sale. So when buying, you must pay attention not to buy a toilet that is too light.
This kind of toilet has product quality problems. Generally speaking, the weight of an ordinary toilet should be 20-25kg, and if it is a good toilet, the weight should be 30-35kg. The weight is smaller than that of a general toilet, so you must pay attention to it.
In general, the first indicator value to evaluate the quality of a toilet is its level of sewage treatment. What good is the water if it can't be washed down? If your toilet doesn't fill with water every time, it's either a pressure problem (which is rarely the problem) or a problem with the toilet itself.
Therefore, when we buy a toilet, we first choose a toilet with a relatively large sewage outlet and a vortex flushing toilet.
We look at the inner surface of the toilet bowl mainly to see whether the surface is smooth enough, whether the color is saturated, especially whether the position of the spout is smooth enough, which is closely related to whether it is easy to clean. There are some poor quality toilets, whether they are glazed at the spout, so it doesn't feel smooth, and the toilet is easy to hang dirty.
1.Look at the gloss of the glaze layer. If the gloss is good, the quality will be better. See if you go to the toilet and if you save water. See if you use the secondary siphon technique, clean it, and experiment with a table tennis game. The toilet can flush down forty or fifty.
2.It is very important to open the upper cover to see if the flush cleaning part is made by a well-known brand manufacturer, as you can see from its appearance. 3.
See if the one-time molding technology is applied, see if there are hoops on the back of the bathroom and on the cover plan, some are not one-time molding, no, ** also need to be lowered by a grade.
-
1.The appearance of the enamel should be smooth enough, and the non-smooth one is easy to get dirty and not clean. 2.Do a blowdown test. Test it with a sample and see how it works. 3.See if there is a toilet shifter, it comes with a good one, has good sealing, and is not easy to smell.
-
Choose a stronger sewage capacity, choose a better quality, choose a siphon toilet, the toilet must be qualified, and choose a relatively large brand.
-
If you want to go to a regular place to buy, you should buy one with very good quality, relatively complete functions, the right price, and after-sales service.
-
Spread over the entire inner wall, spray the toilet cleaner, let it sit for an hour, then rinse it off with water and brush it lightly. It's completely effortless, convenient and fast. The role of paper towels on the inner wall of the toilet is to absorb stains, and when the stains are gone, the toilet bowl is naturally very clean.
Spray the mirror, wall, sink, and sink with cleaning solution from top to bottom, and rinse with water in turn after 2-5 minutes. Cleaning the toilet (squatting urinal): Spray the inner wall of the toilet with toilet detergent (toilet detergent) first, and rinse it with water after 5 minutes.
At the same time, brush the inner wall of the toilet with a special hair ball and rinse it clean.
In general, it is convenient to clean the toilet bowl with toilet cleaner products, and it does not take too much time. When using, it is best to spray along the wall when the toilet bowl is dry, wait for 5-10 minutes, and then use the toilet brush to easily get it, remember that the effect will be better when the toilet bowl is dry. Use a toilet brush to brush, the main thing is to clean it frequently.
Maintain hygiene. Using a toilet artifact can also reduce the number of times you need to clean the toilet. You don't need to use the toilet as often.
Because every time you use it, the bubbles are almost covered in urine. And poop. So the toilet is not easy to get dirty.
Hanging on the wall is long-lasting: the stubborn dirt disintegrates more thoroughly: the contact with the stubborn surface is large, and the cleaning is effortless.
Whitening technology descaling glaze: penetrates into the dirt and cleans quickly. Creates a protective layer that prevents dirt build-up and leaves the toilet basin as white as new.
Tie a few small holes in the bottle and place the bottle in the water tank. In this way, every time you flush the water, you can flow in some water containing detergent, which can have the effect of cleaning the toilet, and when it is time to brush the toilet, you can easily clean the toilet. Just mix the white vinegar and water together, and the ratio of water to white vinegar is 2:
1. After soaking for half a day, rinse it again and it will become very clean!
Many people use this method of cleaning the toilet bowl because it is simple and effective. Just pour some Coke into the toilet, remember to pour it along the inner wall, and then wait for a while to clean it, this aspect can remove a lot of dirt from the toilet.
-
1. The heavier the toilet, the better, the weight of an ordinary toilet is about 50 pounds, and a good toilet is about 100 pounds. The density of the toilet bowl with large weight is high, and the quality is relatively passable. Complex method of testing the weight of the toilet: pick up the lid of the water tank with both hands, you can weigh it.
2. It is best to have one sewage hole at the bottom of the toilet, and now many brands have 2-3 sewage holes (according to different calibers), but the more sewage holes, the more it affects the impulse. The outlet of the toilet is divided into lower drainage and horizontal drainage, and the distance from the center of the drain to the wall behind the water tank should be measured, and the toilet of the opposite model should be bought to "sit at the opposite distance, otherwise the toilet cannot be installed." The outlet of the horizontal drain toilet should be equal to the height of the horizontal drain, preferably slightly higher, to ensure that the sewage is smooth, and the 30 cm toilet is the middle and lower drainage
20 to 25 cm for the rear drain toilet; The distance between 40 cm and more is the front flush toilet. If the model is slightly negligent, the water will not be smooth.
3. Pay attention to the glaze of the toilet, the glaze of the toilet bowl should be bright and smooth without blistering, and the color should be saturated. After inspecting the glaze of the outer surface, you should also touch the drain of the toilet, assuming that if it is rough, it will easily constitute a legacy in the future.
4. Large-diameter sewage pipes and glazed inner surfaces are not easy to hang dirty, and the sewage discharge is rapid and powerful, effectively preventing blockage. Test the method by putting the whole hand into the toilet mouth, usually can have a palm capacity as the best.
5. In addition to the clear dripping sound of the toilet storage tank, the leakage of the toilet storage tank is not easy to detect, and the complex reflection method is to drip blue ink into the toilet tank, stir well to see if there is blue water flowing out of the toilet outlet, if there is a leak in the toilet. As a reminder, it is best to choose a high height for the water tank, so that the impulse is good. (Note:.)
A flush volume of less than 6 litres can be classified as a water-saving toilet. )
-
1.Look at the appearance.
Split toilets are generally small in size and suitable for bathrooms with small space; The one-piece toilet has smooth lines and novel design, and there are many styles to choose from, and the return bend at the bottom of the toilet is closed, which provides convenience for future toilet cleaning.
2.Determine the pit spacing.
Before choosing a toilet, you must first determine the pit distance. The distance between the center of the sewage outlet and the wall, generally this distance has several specifications such as 220mm, 305mm, 400mm and 420mm, and the difference should not be too large when installing, otherwise the drainage effect will be affected.
2.Look inside.
In order to save costs, many toilet manufacturers are working hard inside the toilet. Some of the stains are not glazed, and such toilets are easy to scale and clog. Qingqing recommends that when purchasing, you should put your hand into the dirty mouth in the toilet and touch whether the inside is smooth.
The smooth one is glazed, and the rough one is unglazed.
3.Look at the glaze.
The toilet is a ceramic product, and the glaze quality on the outside of the ceramic is very important. A well-glazed toilet is smooth, detailed, and flawless, and can still be as smooth as new after repeated rinsing. If the glaze quality is not good, it is easy for dirt to hang on the four walls of the toilet.
4.Look at after-sales.
Generally, buyers can enjoy free installation, 3 to 5 years of warranty service, and the manufacturer is responsible for free repair and replacement. After the warranty period, only the cost of replacement is charged. However, some small-scale sellers, although they promise to warranty, can not provide after-sales service.
Therefore, consumers should carefully implement the warranty and installation services at the time of purchase to avoid inconvenience in the future.
-
How to choose a toilet for new house decoration? Which is better, straight punch or siphon?
-
When decorating the home, choose the right toilet method: the toilet purchase process to see the net weight, the purchase of the toilet must first check the net weight, the general ordinary toilet net weight is around 50 pounds, the quality of the toilet net weight is around 100 pounds. Due to the high density of the net weight toilet, the quality is relatively clear.
A simple way to check the net weight of a toilet is introduced: raise the lid of the water tank with both hands and check its net weight first. If it's heavy and layered in your hand, it's very good.
If you think it's light and doesn't feel tactile, then it's undoubtedly unqualified.
In the process of buying a toilet, look at the drain, the normal sewage treatment hole at the bottom of the toilet is one, so the impact will be better. At present, there are many brands of sewage treatment holes with two or three, but the sewage treatment holes are becoming more and more harmful to the impact force. The drainage pipe and horizontal drainage under the drain outlet of the toilet need to measure the distance between the core of the drain outlet and the wall behind the water storage tank, and buy a toilet toilet of the same model and specification to sit at a distance from each other, otherwise the toilet can not be installed.
The drainage outlet of the horizontal drainage pipe toilet should be the same as the relative height of the horizontal outlet, preferably slightly higher, to ensure that the waste water is smooth, 30 cm is the middle drainage toilet: 20 to 25cm is the rear drainage toilet; If the spacing is more than 40 cm, the front drain toilet is used. There is a slight error in the model specification, and the drainage is not smooth.
In the case of toilet purchase, take a look at the glaze layer. In the process of buying a toilet toilet, you must pay attention to the glaze layer of the toilet, the better the quality of the toilet glaze, the smoother and more delicate the glaze layer will be, no blistering, and the color will be saturated. After inspecting the outer glaze layer, you should also touch the sewer pipe of the toilet, if it is not smooth, it is very easy to cause hanging.
In the case of toilet purchase, take a look at the specifications. The toilet is a large-diameter sewage pipe and the inner surface is glazed, which is not easy to hang dirty, and the sewage treatment is fast and strong, and it is reasonable to prevent blockage. The test standard is to put all hands into the mouth of the toilet, and generally have a palm volume is the best.
In the case of toilet purchase, take a look at the water storage tank. In addition to the significant sound of water dripping when the flushing toilet tank is opened, it is generally difficult to detect other problems. A simple way to detect - drip blue ink into the toilet flush valve, stir to see if there is dark blue water coming out of the toilet outlet, if there is, it indicates the area where the toilet has water seepage.
It is best to do a dry and wet separation at home, the advantage of dry and wet partitions is that you can take a bath and go to the toilet at the same time, and after taking a bath, you will not get the whole bathroom with water. If you don't plan to renovate the bathroom, it is recommended that you install a shower curtain to achieve dry and wet separation, which is a more convenient way. >>>More
The bathroom of several square meters can accommodate a family to wash, bathe, and go to the toilet, and it is clean and easy to clean! And here's the secret: the layout is well done! >>>More
**Aspect: On the market, squatting toilets** are relatively affordable, with small space requirements, after all, there is no complex toilet structure, and it is also suitable for bathrooms with small space, but the toilet takes up more space. >>>More
There is no need to install a light strip in the home bathroom, just install a lighting lamp, after all, the moisture in the bathroom is relatively large, if the light strip is installed, it is easy to cause a short circuit in the line due to moisture.
Bathroom decoration is good with tiles first; If the toilet is installed first, it will affect the laying of tiles, which will also cause waste of materials, if the tiles are then laid, so that the tiles can be cut according to the size of the toilet, and it will not affect the appearance and will not cause waste.