GB WS 105 Solar Meter Control Instructions

1. First of all, the first step is to adjust the Beijing time: press the setting key, "time" flashing, you can use the rising and descending keys to adjust the time, press the setting key to confirm, "minute" flashing, you can use the rising and descending keys to adjust the points, press the setting key to confirm.

2. Then after confirming the Beijing time, use the rise and down keys to select the intelligent, timed, and temperature control working mode, and then the selected mode starts to flash, press the setting key to confirm.

3. Then the timing mode is selected, which displays the first timed water supply time, water level, and uses the rising and descending keys to adjust the time, adjust the score, preset the water level and press the setting key respectively to confirm. At this time, it should be noted that the second timer should be set for the same operation. After the second timer is set, set the first timer heating time, preset the water temperature and press the setting button to confirm.

4. Finally, the temperature control mode, pay attention to the display of temperature control on the water Use the rise and down buttons to preset the temperature control temperature and press the setting button to confirm. Then, at this time, pay attention to press the heating, water, and heat preservation buttons to start the corresponding functions. After starting, the heating, water, and keep warm icons flash.

This is a national standard series instrument produced by Zhejiang Beverly Company, which has the functions of automatic water feeding, one choice of two tropical booster pumps, and electric heating control. Some netizens have sent you instructions, so I won't say much here. This is the best quality instrument in the country.

No need to manually control, this meter indication gives you a general understanding of the current state of solar energy, such as water temperature, such as water storage, are controlled by solenoid valves, and water is automatically added when there is no water!!

If the automatic solenoid valve is back, you need to manually enter the water, you can directly press the "water" button on the right, if the circular water storage state is displayed in the jump state, it means that it is in the water intake, and then you press the water inlet to confirm how much!!

The water level lights on the meter are all lit, and the water temperature and sunlight intensity are also displayed regardless of the degree, but there is no hot water, what is the problem?

How to set the heating time.

There is no need to manually control, such as water temperature, such as water storage, are controlled by solenoid valves, and water is automatically added when there is no water. If the automatic solenoid valve is back, you need to manually enter the water, directly press the "water" button on the right, if the circular water storage state is displayed in the jumping state, it means that it is in the water intake, and then you press the water inlet to confirm how much.

The solar water heater meter uses digital means to display the water temperature and water level; Fully automatic water level control, the water level is lower than the specified value alarm and automatic water supply, and the water level will be automatically stopped when the water level reaches the specified water level (the upper limit of the water level can be set by the user.) The set parameters have power-off protection, and the user does not need to set them again when the power is turned on again); When the water level is between the high and low water levels, you can manually turn on and stop the water by touching the button; When the water pressure is insufficient, the booster pump is automatically controlled to work to avoid the failure of water supply due to insufficient water pressure; Fully automatic temperature control, prohibiting water ingress after high temperature air drying, can prevent the vacuum tube from bursting due to sudden injection of cold water. There are solar-controlled instruments, or microcomputer-controlled instruments and controllers.