How to maintain the camel brand battery, do you need to charge?

1.It is best to charge the battery once when the depth of discharge is 50%-70%.

2.After the battery has been discharged to the termination voltage, continuing to discharge (over-discharge) will cause serious damage to the battery.

3.The charging current should be less than or equal to the charging current acceptable to the battery.

4.Lead-acid batteries are especially afraid of loss of discharge, and the loss of battery for 3-7 days may be permanently damaged.

5.The battery runs in the high temperature season, and the main problem is overcharging. Therefore, in summer, the temperature of the battery should be reduced as much as possible to ensure good heat dissipation, prevent charging after exposure to the sun, and should be kept away from heat sources.

In the case of low temperature, charging mainly has the problem of poor charging acceptance capacity and insufficient charging, resulting in battery power loss. Thermal insulation and anti-freezing measures should be taken at low temperatures, especially when charging, it should be placed in a warm environment, which is conducive to ensuring sufficient power.

7.Under normal circumstances, the service life of batteries with a large discharge depth is about 1 year, and the service life of batteries with a discharge depth of 50%-70% is about 1 and a half years. The batteries produced by individual manufacturers can reach more than 2 years.

1.Don't just change the charger and don't remove the speed limit of the controller.

2. Protect the charger.

3. Charge every day.

4. Charge in time.

5.The battery is filled with acid in time after use.

It must be charged, and the sealed battery also has an electrolyte, which will also be lost.

Maintenance-free battery water can be carried out by a few steps, the battery must be replenished in several states, friends can understand the battery they use, when the battery needs to be replenished after one year, it should also be noted whether the battery has a long-term heating situation, if there is a need to replenish water in time. When replenishing water, friends also need to prepare corresponding equipment, generally need to use specific distilled water, let's find out together.

Maintenance-free battery water filling method.

First of all, you can remove the welding wire of the battery, open the battery cover is also very easy to operate, you can see a lot of exhaust holes after opening the cover, use a screwdriver to open the notched place, generally speaking, there are many exhaust holes on both sides of the battery, you must pay attention not to use too much force when unloading, because most of the batteries are made of ABS material and are easy to deform under the action of great force.

Secondly, after opening the lid, you can see that there are still a lot of caps in the exhaust holes, and friends must pay special attention when twisting, because the internal pressure may cause the rubber cap to separate quickly. The next step is to inject water, you can choose to use a commonly used syringe for water injection, according to the specifications of different batteries, the amount of water required to inject is generally 5ml.

Third, after the completion of the water lag friends need to pay attention to the lid on some glue, so as to ensure that there is no leakage and no evaporation, otherwise it is easy to cause the water to be added in vain, friends also need to pay attention to leave a little gap in the position of the exhaust hole, if the internal exhaust can not be completed, there will be a certain risk, need to pay special attention.

The method of adding water to the maintenance-free battery has been introduced to friends in the above, can you find that such a method is very simple, do not use it immediately after the battery is added with water, you can wait for a night, this is to let the water in the battery get a rapid absorption effect, keep the concentration of the electrolyte consistent.

The quality is about the same. But be careful after sale, there is no production date on the battery (other brands have), and the time is long and the production date of the outer packaging is manipulative. I've been fooled once, it's the goods from the Chengdu warehouse, and I want to inquire about it and be ridiculed.

Camels, don't want to use them anymore.

It's okay, camels and sails are good brands, of course, depending on the model, there are some special applications, they are not very good.

This is maintenance-free and good, but the battery is generally used for about 2 years. Look at your usage, after 2 years the efficiency starts to decrease. A bad battery breaks down in a few months or in less than two years.

Sent to auto bai

The place where the car is repaired or the battery is repaired can be charged, ** in the dao about 20 yuan. You can get them to edition.

Check whether the battery needs to be replenished with battery water.

Lou Zhu, you don't blame me for not saying it yourself? Give you a face, you don't have a face, what the hell? Your father regrets giving birth to you, it's so embarrassing.

I just read your information.,It turned out to be a native of Henan.,No wonder.。。。

The general service life of the battery is about 2 years, and it is generally replaced with a new one.

There are plates and electrolytes inside the battery, and if you don't store electricity, you can't repair it without the corresponding materials after decomposition (and the process has requirements).

It's okay to replace the battery with a new one, you are not a professional, and you can't fix it yourself.

I don't want to fix it, because you don't have the knowledge and craftsmanship in this area, just replace it with a new one.

What to fix if the battery can't be charged.

How to repair the 12V battery without storing power, copy the 12V battery activation method The battery is used as a car power supply equipment, and its quality affects the use of electrical equipment in the car, and it will also affect the start of the car. It is very common for the battery to lose power, and the battery does not store power, which may be due to the end of the battery life, resulting in the deterioration of the battery's power storage capacity; It can also be caused by insufficient electrolyte or insufficient voltage in the battery. However, the most important thing is how to fix the battery if it does not store power, let's take a look at it together.

Generally, the life of the car battery is about 2-3 years, if it is used for a long time, its power storage capacity will become worse, and there will be no power storage, at this time you can consider replacing the new battery. If the electrolyte is insufficient, you can add an appropriate amount of distilled water or purified water to the battery, but you can not use tap water, which will cause serious self-discharge of the battery.

The battery voltage of a car is generally 12V, and the 12V voltage is not fixed. Under normal circumstances, the battery voltage before the car starts is in between, and the battery voltage after the start is in between. If the battery voltage is lower, it indicates that the voltage is insufficient; If the voltage is lower, it means that the battery is out of power and needs to be charged and activated with a charger in time.

In addition, if the battery voltage is lower than 10V, the battery cannot be charged, so it is necessary to use the high-resistance repair of the repair instrument to increase the voltage to more than 10V, so that the power can be charged.

Camel battery.

The lifespan is generally about two or three years or even longer. However, if you are familiar with the people in the repair shop, you can replace it with a new electrolyte during the warranty period.

There are three colors of red, green and yellow, the color of the electrolyte can be observed through the window hole, and green represents the life of the normal battery is generally about two years, and there are many reasons for battery damage

1. Over-discharge;

2. The battery is stored for a long time (it has not been charged during storage);

3. It cannot pass the car engine.

Charge; 4. There is no electrolyte;

5. The specific gravity of the electrolyte is too high;

6. Charging under high temperature conditions;

7. Polluted by dirt (such as hydrochloric acid, mu empty seawater, organic acids, etc.).

The shelf life of the camel battery is about two years, and if it is too long, it should be damaged.

Camel AGM start-stop battery is made of environmentally friendly materials, using Italian Sowei code technology grid, the battery has a low self-discharge rate and stable performance, which not only effectively reduces 5% of automobile fuel consumption, but also has a high cycle charging capacity, strong low-temperature start-up, durable at high temperature, and is suitable for a variety of bad weather environments. When the vehicle encounters bad weather, the battery suddenly dies; In the event of an accidental breakdown during the journey, the camel can solve the problem for the owner in time. Camel battery can be adapted to 90% of the models on the market, when the vehicle battery is out of the current situation, the owner through Jingdong, Tmall, Suning and other platforms of the camel battery official order to accompany the elderly, the fastest 28 minutes can be installed in place.

After purchasing a camel battery, a professional camel installer will bring tools and a new battery to the door for installation, and the owner no longer needs to run to the maintenance point and car maintenance shop. After the battery is installed, the owner confirms that the battery replacement is correct, and the installer will take the battery packaging and the old battery away together to ensure that the waste battery is standardized**.

Basically, whether it is an electric car battery, or a car battery, it is basically a warranty of about one year, if there is a problem with the use, you can contact the store to deal with the bridge Sen grip, there is also a delay time, this needs to be discussed with the merchant Chunchun, it is best to find a responsible Dapin Minqing brand store to buy, at least if there is a problem, you can contact the store immediately to solve the problem.

The longest warranty period of the camel storage bend Hongqi pool is 27 months, and if there is a problem with the storage pot during the warranty period, you can contact the customer service of the camel to consult the after-sales service of the buried pure. ”

The longest warranty period of the camel battery is 27 months, and if there is a problem with the battery during the warranty period, you can contact the customer service of the camel and consult after-sales service.

The warranty of the camel battery should be about one year, and their warranty period for dealers is about 18 months.

Summary. Dear, this question is up to me, it takes a little time to type, please be patient, thank you!

How long does it take for a camel battery to charge?

Dear, this question is up to me, it takes a little time to type, please be patient, thank you!

If it is a vehicle battery and is charged with a charger, then the normal charging time is generally about 30-60 minutes to fully charge, because the normal charging current is according to 10AIf you calculate, then 60A, it will take about 30-60 minutes at most, and if it is put on the car to start charging, it will normally take about 30 minutes.

It is best to control it at 8 hours.

The first three charges of a new battery are best in 8-12 hours, and then it can be mastered in 6-8 hours; It doesn't matter how fast or slow the battery is charged; The key is the discharge time; It can be used for a long time after discharge; As long as the battery can be charged and discharged, it can continue to be used.

The most taboo of general batteries is overcharging and overdischarging; As long as these two principles are followed, the maximum use and maximum service life of the battery can be used.

Method: 1. The battery generally retains more than 20% of the battery, the chemical conversion efficiency of the battery is about 50% when charging, and the power needs to be increased by 150%*80% when the battery is fully charged.

2. The optimal charging current of the battery is 10% of its capacity, however, the charging time needs to be 150%*80% 10%=12 hours, plus about 1 hour of segmented charging time.

3. In order to meet people's work and rest time, in the design, the charging current with a capacity of 13% is generally used, so that the charging time is at least 150%*80% 13%=hours, plus about 1 hour of segmented charging time.

Summary. Hello dear, find a 12V charger, the two clips are clamped on the pole of the battery according to the positive and negative poles, adjust the charging current to about 1/10 of the capacity, open the charger to charge, the current pointer of the charger is full when it returns to zero.

How to charge the camel brand 12 volt battery.

Hello dear, find a 12V charger, the two clips are clamped on the pole of the battery according to the positive and negative poles, adjust the charging current to about 1/10 of the capacity, open the charger to charge, the current pointer of the charger is full when it returns to zero.

Dear, I can't hear the voice, please describe it in words.

Dear, after choosing the right charger, clip the black clip of the charger to the negative pole "-" binding post of the battery, and the red clip is clamped on the positive pole"+"On the binding post, plug the charger into the power supply and it can be charged. If you are using a charger that can adjust the current, you can adjust the current to about 3A to charge the battery. After 10 hours of charging, the battery is fully charged.

Pro, 12 volt battery charging Note: 1. Check whether the battery is intact and whether the wiring is intact before charging, and open the air cover. 2. When the single-compartment voltage drops to 41V (driving load) and the specific gravity of electrolysis drops to, it should be charged in time.

3. The temperature of the electrolyte should not exceed 55 during the charging process, otherwise measures should be taken to reduce the charging current, artificial cooling or suspend charging. 4. When the battery is charged to saturation, the voltage and the specific gravity of the electrolyte will not rise within 2-3 hours, and a large number of bubbles will emerge, and the specific gravity of the electrolyte will reach and the voltage of a single grid will reach.

Summary. Hello dear, I am glad to answer for you how to disassemble the camel brand 12v flooded maintenance-free lead-acid battery: hello kiss Camel brand 12v flooded maintenance-free lead-acid battery disassembly method First remove the camel maintenance-free battery from the battery pack, and then the upper part of the camel maintenance-free battery, find a sealing plate, this sealing plate is made of rubber material, glued on the upper part of the battery, and then find a small driver, slowly pry off the sealing plate, and remove the sealing plate, At this time, the 6 water-filling holes of the camel maintenance-free battery are revealed.

Hello dear, I am glad to answer for you how to disassemble the camel brand 12v flooded maintenance-free lead-acid battery: hello kiss Camel brand 12v flooded maintenance-free lead-acid battery disassembly method First remove the camel maintenance-free battery from the electric trace pool group, and then fight the upper part of the camel maintenance-free battery, find a sealing plate, this sealing plate is made of glue material, glue on the upper part of the battery, and then find a small driver, slowly pry the sealing plate down, and remove the sealing plate, At this time, the 6 water-filling holes of the camel maintenance-free battery are revealed.

The steps of dismantling are as follows: first cut the metal connection pieces between each of them with a saw, then pour out all the electrolyte in the battery, and then pour in the high-temperature water to dissolve the asphalt on the battery stove, and take out each rough unit while it is hot. That's the basic unwrapping situation.

Steps and methods for decomposing lead-acid batteries (1) Open the lid of the liquid filling hole and pour the electrolyte into the acid container. (2) To remove the connecting strip, you can use a twist drill bit or a hollow drill bit. (3) Scrape off the sealing glue.

4) Melt the positive and negative electrode piles to separate the electrodes from the battery, remove the battery cover, and pull out the plate group with a special tensioner. After the plate group is removed, rinse with distilled water, and the partition plate is drawn from both sides. The shell of the 12V Tianneng lead-acid battery can be disassembled by opening the inside.