Instructions for use of Linuo Rite Solar Intelligent Control Instrument Sunshine Zhibao 3 are urgent

1. Insert the sensor through the overflow pipe, gently pull the lead wire to make it close to the inlet, and then extend it inward about 1 cm, and then put the fixing piece on the overflow pipe.

2. Introduce the special wire of the sensor into the room and fix it, and do not wait for too much force to avoid scratching or breaking.

3. It is forbidden to get the socket wet during installation. The sensor must not touch or be too close to the electric heating tube.

4. If the under-mounted sensor is optional, install it from the bottom of the water tank, tighten the fixing nut, and check whether there is water seepage.

5. If it is equipped with a top-mounted sensor, install it from the top of the water tank downward, and fix the wire with a cable tie.

I want to buy a Sunshine Zhibao, a smart measuring and control instrument type 3.

Operate according to the manual, or contact customer service, the operation of different models of instruments is different.

The diagram corresponds to the three functions and steps described below.

1. See if you are hydrated.

It can be seen from the electricity meter, no turn means no water 2, the water heater is powered off, it does not have to be the same model, there are these functions on it, press the heating automatic or manual, whether the electric heating of the water heater is working, and the control plug is unplugged to unplug the solar water heater.

2. Check whether the hydration function is normal.

According to your picture above, if you don't replenish water, there should be a display on the LCD screen, if you don't replenish water, use up some hot water first, your this should have auxiliary electric heating, check the heating function, there is automatic water on the function, if the LCD screen is broken, do not turn to indicate that the power is not replenished, you still buy a controller on **, it should be heated, the heating can be solar heating, you can also use electric heating to assist heating, and then press the manual button to water it, and then plug it in, The fast rotation of the electricity meter indicates that the electric heating is working, and the rotation of the water meter indicates the water supply.

3. Whether the water is on or not can be seen whether the water meter is turning.

Check your solar water heater for yourself. If there is water in the water heater, see if the water meter is still turning at this time, press the control button to automatically turn on the water, connect the line yourself, and manually add the water.

Is the Linuorite you bought easy to use, and I plan to buy one recently

Hello answer, I have seen your question and am sorting out the answer, please wait a while Oh 7Power failure memory: When the power fails, the meter and controller retain all the parameters preset by the user and the Beijing time, and the meter will automatically lock the button when the power is off to prevent misoperation.

When a call comes in, it can continue to run according to the previously set working mode and function.

Need anything else.