What kind of board should be used for the cabinet? What are the waterproof plates?

1. Acrylic door panel.

The surface of the acrylic door panel is very smooth and easy to clean, and the disadvantage of the acrylic door panel is that it is relatively easy to change color, such as white will be easy to turn yellow, and the acrylic door panel ** will also be a little more expensive.

2. The paint door panel is painted into the drying room after the paint is sprayed into the drying room and the paint door panel is divided into many categories, including UV paint, piano paint, wood paint, etc., and the surface is matte and bright, whether it is matte or glossy The surface is smooth and very easy to clean, the disadvantage of the paint door panel is that it is easy to scratch and scratch, but the door panel will not be scratched often, so you don't have to worry too much about the paint door panel.

What kind of board is better for cabinets? What are the waterproof plates? I think that the cabinet, under normal circumstances, must be the kind of better quality and better waterproof effect.

What kind of board is good for service? What are the waterproof plates? The cabinet must be waterproof, if you want water, when the kitchen is cooking, he has a hot air balloon, what kind of board should the cabinet be good for the hot air balloon?

What are the waterproof plates? The cabinet must be waterproof and weak, if you put water, the kitchen has a hot air balloon when cooking, and the hot air balloon has water droplets, so if you say waterproof, you can prevent oil and water.

The waterproof effect of the board on the market is fresh board, etc., the moisture content of this board is better than the national standard by more than 60%, is one of the few waterproof boards on the market. Of course, if you want to buy a board with good waterproof effect, you need to pay attention to the following points.

I don't know much, this is based on your own economic strength, choose more to compare, and find the right one.

What is the most durable and affordable plate for the cabinet.

1. Polymer polymer is a material similar to blister, and it has no edge banding. This material is a material that replaces baking paint in foreign countries, and the wear resistance is better, and the only drawback is that the color is relatively less. Lacquer is more suitable for a modern style.

There are many colors of baking paint, and you can choose the color according to the overall decoration style of the home. But the disadvantage is that the surface is easy to scratch. 2. Wear-resistant plate The wear-resistant plate is made of kraft paper, soaked in trichloroamide solution, pasted on the veneer, and the surface will have different colors to choose from.

The wear resistance and corrosion resistance of this material are relatively good and economical. 3. The resin board has an extra layer of protective film than the paint, and the paint is done on the back of the resin board. Even if the surface is scratched, it will not reach the lacquer body, and it will not change color or be obvious if scratched.

The color that can be made with baking paint can also be done with resin board. Overall, it can be regarded as an upgraded version of baking paint. Fourth, solid wood veneer solid wood veneer is commonly known as solid wood veneer, which is to cut off the cracked and hidden skin of solid wood and then paste it on the board.

The interior of the cabinet is mainly made of MDF, particleboard and solid wood veneer. MDF MDF is the lowest-end of the type. It is made by beating the best wood and melon seed skin into powder, adding a large amount of glue, and hot pressing at high temperature.

The MDF nail gripping force is not strong and is easy to deform. Particleboard is more high-end than MDF particleboard, which is made of fresh wood, beaten into coarse fibers, and then hot-pressed at high temperatures. The wood is broken to make particleboard because it is easy to crack directly with solid wood, and it is not easy to deform when made into particleboard.

There are also higher-end solid wood veneers, which need to be made of precious wood materials with the required hardness.

MDF or granular panels for cabinets are durable and affordable.

1. Density board.

MDF is a kind of board made of denier trembling plant fibers, and the most commonly used plant fibers are wood fibers. Fibers are added to a synthetic resin material, heat and pressure are applied, and the production is produced in a high-temperature and high-pressure environment. Due to a series of operations, the density of the plate made by this method is uniform and symmetrical, with a fine and soft material, and it is not easy to bend, which is convenient for secondary processing, so it is widely used in the decoration industry.

2. Particle board.

Particle board, also known as particleboard, is the branches, sawdust, etc. processed into more finely fragmented wood chips, after drying treatment through a certain temperature processing, adding hardener and colloids and other pressed board, its particle arrangement is uneven compared with MDF but also has excellent mold isolation ability, its raw materials are relatively simple.

What are the materials of the cabinet

1. Solid wood

Due to the characteristics of solid wood, there are very few large households that use solid wood to make cabinets, although the environmental protection level of solid wood is high, and the texture is good, but solid wood can not be well resistant to moisture and wear, and the cost performance of custom cabinets is really not high.

2. Particle board

Particle board is mainly made of wood scraps pressed with glue, etc., and this kind of board also has many advantages, not only can bear a heavy weight, but also is not easy to deform, very strong. Although many particle boards are now equipped with moisture-proof additives, they do not work even if they are particularly wet, and because the particle boards are particularly strong and difficult to bend, the requirements for processing machines are also particularly high.

3. Solid wood multi-layer board

This material is now a kind of board that is the mainstream of custom cabinets, it has many advantages, the structure is particularly strong, not easy to deform, and compared with the moisture resistance of particle boards, it is also better, and it is not expensive.

4. Stainless steel

Because the kitchen and bathroom are the most humid places in the whole home, no matter how moisture-proof the board has been used for a long time, it is difficult to avoid the situation of moisture and mildew, so there is a once and for all material, directly use stainless steel to make cabinets, not only can be fireproof and explosion-proof, but also do not need to worry about formaldehyde, and it is also very convenient to clean.

5. Quartz stone

Quartz stone is a natural stone, hardness, strong and durable, and waterproof, fireproof, the surface is a natural stone grain, the appearance is also very high, ** is also more expensive, because the hardness of quartz stone is relatively strong, so it is more troublesome to do drawers, it is recommended that you use this rental material as a countertop, the cost of using it as a cabinet is too high.

What kind of board to use for cabinets, the most resistant to hunger, and the most affordable, depends on your budget and needs. Here are some common cabinet panels:1

MDF: MDF is an affordable option, but it is less durable and prone to moisture and deformation. 2.

Solid wood boards: Solid wood boards are a high-grade option, but they are higher and require regular maintenance. 3.

Particle board: Particle board is a mid-range option in the residual limb, which is moderate and has good durability, but it needs to be paid attention to moisture-proof. 4.

MDF: MDF is a high-grade option, **higher, but durable and not easy to deform. All things considered, particle board is a more affordable and durable option.

But if you have a higher budget, you can consider MDF or solid wood boards.

1. Solid wood cabinets are more common cabinets made of solid wood, which has strong environmental performance, hard and firm board material, and natural and simple colors, which are very graded; Modern Chinese decoration style is used more, of course, the first aspect is also more expensive, you can choose according to the actual budget;

2. PVC cabinets.

The biggest advantage of PVC cabinet is that it has good waterproof and moisture-proof performance, but it cannot withstand high temperatures, and it will be deformed at high temperatures for a long time;

3. Stainless steel cabinets.

The advantage of stainless steel cabinets is that they are easy to clean, the appearance is atmospheric and fashionable, and they are deeply loved by consumers who are light consumers, but its disadvantage is that the heatstroke prevention performance is not good.

4. Blister board cabinet.

The base material of the blister board is medium-density fiberboard, and the surface layer is made of vacuum blister or a seamless PVC molding; The advantages of the blister board are quiet: the color is gorgeous, the texture is good-looking, heat-resistant, if the cabinet has oil stains, it only needs to be wiped with a rag, and it is more convenient to clean.

5. Plexiglass cabinets.

Plexiglass cabinets are not only beautiful in appearance, but also very durable, but if they are made of plexiglass, the construction requirements are relatively high, so you still have to hire professionals to operate.

6. Molded cabinets.

The molded type generally uses MDF as the base material, and PVC is used as the veneer to be formed by high temperature hot pressing, and the molded type is matte molding and high-gloss molding, which can be processed into various leakage shapes.

Brick cabinets are the most durable and affordable. The last one is more recommended, that is, the brick cabinet, which solves the shortcomings of the previous ones. In the past, the main body was built with red bricks, which took up more space, and now the main body is made of ceramic tiles after process upgrading, and the column is supported by two tiles, which takes up less space.

It's called a brick clamp cupboard.

Because it is made of ceramic tiles, first of all, it is not afraid of water and moisture, and it is made of tiles inside and out, and there are no gaps on the smooth surface of ceramic tiles, which will not hide dirt and dirt and will not attract cockroaches. The most important thing is that it is strong and durable, the main body is made of tiles, the countertop is poured with cement, and the reinforced countertop is added to make it stronger. Usually, you don't have to worry about problems when you chop meat and bones.

The only drawback is that it is not easy to replace, because it is no problem to use it for decades if it is done, and you have to wait until you change the house.

Cabinet Panels:

1. Solid wood plank: advantages: wood texture, overall beauty and atmosphere. Disadvantages: easy to crack, not corrosion-resistant, not waterproof, easy to deform and crack, inconvenient to clean, **expensive.

2. Solid wood multi-layer board (multi-layer plywood): advantages: high hardness, not easy to deform, cheaper than solid wood board, better moisture resistance. Disadvantages: There are many counterfeit and shoddy products in the market.

3. Wood particle board (particleboard): advantages: not easy to deform, have a certain bearing capacity, and some add moisture-proof particles. Disadvantages: The processing has glue, which is not so environmentally friendly, and it is easy to mold without moisture-proof particles.

4. Melamine board: advantages: fire resistance, wear resistance, high temperature resistance, corrosion resistance, high practicability. Disadvantages: The edge banding is easy to crack, the glue is obviously unsightly, and the style is relatively small.

5. Stainless steel: advantages: good heat resistance, corrosion resistance, good stain resistance, not easy to have peculiar smell. Disadvantages: single style, poor visual effect, easy to scratch.

6. Paint board: advantages: smooth and beautiful surface, bright color, not easy to deform, waterproof, moisture-proof and anti-fouling, easy to clean. Disadvantages: expensive, not resistant to bumps, easy to wear and scratch, easy to fade.

7. PVC board: advantages: waterproof and moisture-proof, various styles. Disadvantages: easy to wear, easy to scratch, not resistant to high temperature, market quality is uneven.

8. Crystal plate: advantages: waterproof and moisture-proof, anti-corrosion, easy to clean, relatively beautiful, and various styles. Disadvantages: not wear-resistant, scratch-resistant, poor flame retardant performance, pressure difference, easy to crack and fade.

9. Fire-resistant board (fireproof board): advantages: beautiful and practical, bright color, wear-resistant, high-temperature resistant, scratch-resistant, anti-penetration, easy to clean, moisture-proof, non-fading, and affordable. Disadvantages: The board surface cannot be made into three-dimensional fashion styles.