Rural cement board house leakage, which leakage method is the most reliable?

If the gap is large, mix the asphalt and sand together, and then spread it in the gap of the cement board, if the gap is small, use glass glue.

The commonly used method is to enlarge the cracks with tools, rinse them with water, pour pure cement slurry water, not too full, and then heat and pour the asphalt glue [a special glue for plugging] into the cracks to completely cover the cracks without leakage.

Roof leakage full paving method, is in the appearance of water leakage of the roof, the roof is all waterproof, the roof structure is divided into two kinds of cast-in-place plate structure and prefabricated plate structure, no matter what kind of structure of the roof full paving waterproof can be a good solution to the leakage phenomenon, roof leakage local repair sometimes do not do well, there will be a good repair, there is a leakage situation, full paving method to repair the roof leakage, there will not be a good repair, there is a leakage situation full paving method to repair the preferred material for roof leakage, be sure to choose hot melt coil, Hot-melt coil is more resistant to aging and high temperature, and is more suitable for laying on the roof.

1. Cement board.

Water leaks can be repaired with cement slurry, waterproofing glue, asphalt and waterproofing powder.

2. If you use cement slurry to fill the leak, first brush the cement slurry in the cracks, and then spread the waterproof glue on it. The area is larger, not only limited to the cracks, you can coat the cracks around the waterproof glue, and when the waterproof glue is about to dry, immediately brush a layer of cement slurry, which can not only solve the problem of floor leakage, but also increase the waterproof life of the floor.

3. You can first coat asphalt in the place where the floor is leaking, and then use special waterproof powder to stir into the cement to make a waterproof layer, this method is more suitable for the six-point surface of the larger leaky cement board, the stirred waterproof powder is transferred into the cement, and then a layer of cement can be applied after drying.

Buy some leak-proof agent yourself, find some asphalt, (asphalt paste) first drop the leak-proof agent in the seam, cover with asphalt, (asphalt paste) and so on, and then seal it with cement, press the bricks on it, two horizontal or two vertical can be, and then pay attention to pressing the seam, if the rain leaks in a large area, it is recommended to use color steel or buckle the tile, the advantage is that it is beautiful and generous, once and for all, to avoid frequent toss in the future. And in summer, it can shade the sun, so that the indoor temperature is not so high, warm in winter and cool in summer. The disadvantage is the high cost.

The leakage of the bungalow in the house can be said to be unpreventable, there was a brush of waterproof glue before, there are waterproof stickers, it can be said that it will not be used for too long, it should be the floor slab in the sun, it can reach more than 40, and an egg can be cooked in summer. The waterproof effect is good, the construction period is short, the service life is long, the later stage is basically no maintenance, warm in winter and cool in summer, no snow removal in winter, this kind of roof drainage performance is good, and there are some ventilation openings around it, which is conducive to protecting the original roof. Cement roof, wooden roof.

Because I haven't seen a remedy, I still ask you to ask a professional master, he will give a method according to the actual situation, if the situation is serious, the flower can not be saved, or one step in place. Rain leakage, then ask a professional to repair, I also have experience in this area, according to the leakage area of the house, buy some asphalt and linoleum, clean the room, when the asphalt is heated into a diluent, brush on the leakage part of the room.

You have to look at the appearance first, whether the tiles on the roof are broken or slipped. If you can see from the outside that the roof tiles have broken or slipped, then you just need to replace the broken tiles and smear a layer of mud under the tiles. It is impossible to start from simple attention, and it is necessary to hire professionals, either to redo the waterproof layer and then pour the concrete roof, or to build a spire of foreign tiles or color steel plates on the roof, which can be insulated and leak-proof.

The roof of the three structures is the most prone to water leakage, and the third type of prefabricated floor roof has the heaviest rain leakage, and it is very difficult to solve.

First of all, it is necessary to find the place where the rain leaks, fill the gaps with cement, and then lay a rainproof cloth and compact it with tiles. Do a good job of draining the roof so that rainwater can flow to the ground in time.

If the rural bungalow leaks, you should change a waterproof tarp on it in the place where the rain is leaking, so that you can prevent rain leakage.

Generally, the roof is refilled, or a layer of cement, and some bricks will be added to fill the leakage.

It can be repaired with a little waterproofing membrane, which is cheap and practical.

I think the best way to do this is to lay some asbestos netting, which is a very effective way.

You can mix the weeds in the countryside into the soil, stir it into mud, and wipe it to the place where the rain leaks, or you can choose river silt, which is very strong and will not crack.

If there are no cracks in the corresponding place of the wall, the problem is not big, most of us in the countryside have cracks and leaks, that is, repair the cracks to ensure that there is no leakage! There are many maintenance methods, if the crack is stable, groove along the crack, use a layer of waterproof paint to coat, and then fill it with waterproof mortar, it should be slightly higher, the problem is solved, of course, if special materials are applied, this method can basically ensure that the house does not collapse, no water leakage, more information, better advice, free professional technical consultation for concrete waterproof leakage water repair, exempt from repairing today, leaking tomorrow; Repair every year, the trouble of leaking every year.

It depends on how much money you choose to tinker with. It's better to build a shed. It is also 70 yuan per flat. Heat insulation. Rainproof. It is very convenient to dry clothes, and the life span is about 20 years.

Build a shed on top of it to keep it waterproof and insulated.

You can ask the Selik Construction Technology Company in Guangdong, I think you still have to find them to do it for you.

Summary. In fact, the first way you can use the filling method: first clean up the cement that has fallen off due to weathering, and remove the dust, so as not to affect the leakage effect.

When using cement mortar to fill cracks and cavities with caulk. Re-reinforce the wider cracks to fill the flat, remove the weathered cement layer, then fill it with cement mortar, add anti-seepage patching agent after drying, sprinkle it on the roof, and then push it away with a wooden board and scraper to cover the entire roof.

In fact, the first method is to use the method of filling: first clean up the cement that has fallen off due to weathering, remove the dust, so as not to affect the leakage effect. When using cement mortar to fill cracks and cavities with caulk.

Re-reinforce the wider cracks to fill the flat, mountain and remove the weathered cement layer, and then fill the tomb with cement mortar, and then add anti-seepage and leakage repair agent after drying, sprinkle it on the roof, and then use a wooden board and scraper to push it away to cover the entire roof.

In addition, there is actually a very good way, but many people don't use it often, which is to use this asphalt. Wipe the roof with asphalt, and then slide this way can also be, when it rains, the dust and water will naturally leave a letter to amuse the rock down.

Most water leaks are cracks that need to be filled with leak sealant.

1.Find out the location of the water leakage: First of all, you can find out the location of the water leakage, and you can determine the location of the water leakage by observing water stains, water traces, water droplets, etc.

2.Clean up the leak: Clean the debris and dust from the leak for better repair.

3.Use waterproof materials: You can use waterproof paint, waterproof glue, waterproof tape and other materials for repair. Apply waterproof material to the leak so that it completely covers the leak.

4.Reinforcement of water leakage: If the water leakage is more serious, you can use materials such as steel mesh or barbed wire to reinforce the water leak to make it more firm. Socks or.

5.Check the repair effect: After the repair is completed, check the repair effect in time to ensure that the water leakage problem is completely solved.

6.Prevention of water leakage: Pay attention to keeping the house dry and clean the roof and drainage system in time to prevent water leakage.