What to do if the wooden planks of the walls and windows rot after home renovation

Are you talking about window covers? If it is within the warranty period, you can find the renovation company that installed the house for you to solve the problem for you! If the warranty period has expired, you can also find a carpenter to help you remake the window cover, if it is troublesome, you can go to the decoration company to help solve it.

You need to solve this problem with paint.

1. You can first clean up the attachments on the surface of the wood, 2. You can use brushing, spraying method to use meiboss wood mold remover, just on the surface of the wood board just appeared mildew, slight mildew, mildew, mildew spots, with a brush stained with meiboss wood mold remover evenly brushed or sprayed directly on the surface of the wood mold, 3, put it in a well-ventilated place to dry naturally, and the wood mildew can be eliminated after the post-processing can be carried out, for the wood with serious mildew, the mildew cycle is long to repeat the treatment 2 times, Use a brush to evenly apply the mold remover at an interval of 12 hours each time, and the surface wetting of the board shall prevail during operation.

Hello, the panel is damp and blackened, the paint is pried up and the board is generally replaced, the bottom plate of the panel is replaced, and then the new bottom plate is treated with moisture-proof treatment and then pasted with the panel paint. There's no good way to do it.

It is unlikely that moisture will penetrate from the surface after the panel is painted, and it is mostly caused from the bottom.

Who decorates you best to find who to repair for you, this is a quality problem, who let him not do a good job of moisture-proof treatment at that time, I don't know what the warranty period you agreed on at that time was.

No, if you want to dry it when you use it, it will be better......

The main cause of mold is lack of ventilation.

Since there are not many of them, it is recommended that you store them upright, and it would be better if there was a gap between the plates.

The house is humid and ventilated.

When decorating a house, a wardrobe is an indispensable piece of furniture, and the wardrobe is very practical. In daily life, the service life of many wardrobes is several years, and everyone may only pay attention to the appearance and volume when choosing a wardrobe, ignoring some important issues. So how should we choose a wardrobe, the following is a valuable suggestion given by the master, let's learn together.

1. Wardrobe with multiple partition partitions.

The first thing is to choose a wardrobe with multiple partitions, which can classify clothes, pants, ties, etc., so that it is easy to find and convenient when wearing. For office workers, life is very fast, so designing a wardrobe can also save time, otherwise it is a waste of time to find this and that every day.

2. Wardrobe doors.

The choice of wardrobe doors, wardrobes generally have two kinds, sliding doors and swing doors, now there are more sliding doors for small houses, on the one hand, it is the space-saving sliding door; On the other hand, it is convenient to push and pull. The service life of the wardrobe with sliding door is shorter than that of the wardrobe with swing door, and in daily life, the rollers and rails at the bottom of the sliding door wardrobe are prone to wear and tear, and it is also troublesome to take care of.

3. Install a fitting mirror behind the wardrobe door.

There are a lot of details in the decoration of the bedroom, in feng shui, the bedroom can not be installed mirrors, but for small houses, as long as the mirror is installed in the bedroom, it is inevitable that the bed will be opposed. Then when designing the wardrobe, install the fitting mirror behind the wardrobe door, which can not only meet the needs of the mirror but also save space; And it also avoids the taboo on Feng Shui, killing two birds with one stone.

4. The wardrobe is best to be topped.

If the wardrobe is selected and the top is not achieved, then you can buy some top cabinets and install them, which also has the effect of putting the top on it. If it is a custom-made wardrobe, it is generally topped when designed. The main reason for choosing a top-mounted wardrobe is to avoid dust in the future and reduce the workload of cleaning.

5. Don't use paint-free boards to make wardrobes.

The biggest advantage of paint-free board is that after it is made into a finished product, there is no need to paint again, so it is a more environmentally friendly material and more affordable. It should be noted here that the disadvantage of paint-free board is that it is afraid of moisture, especially the inferior paint-free board, which can be used for about three years at most, and the density is low, and it is easy to appear dents.

The wooden wardrobe at home is always moldy in various ways.

How to deal with the moldy wooden wardrobe has always been a problem that most people are distressed by, I will learn how to deal with the moldy wooden wardrobe from everywhere, and see how everyone deals with the moldy wooden wardrobe!

One: wipe, first of all, we can use some paper towels to wipe it, in the case of not much mold, it is very safe and reliable to use such a method, if the mold is too much and too stubborn, I can consider using a brush to brush it!

Two: ventilation in general, the period of the room is too large, bacteria are easy to breed, resulting in some solid wood furniture products often poignant, at this time, we should pay attention to the ventilation and dryness of the room, do not use humidifiers in the house, after mopping the ground, but also open the door or window in time, let the air in the indoor fast Li Tong, in order to eliminate the indoor moisture outdoor, at the same time, in the indoor place some orange peel is also good!

Three: put lime, lime has a good anti-moisture, keep items and food dry, and we can also use this method on how to deal with moldy in our wooden wardrobe, like in the spring and summer intersecting season, the most humid weather, at this time, I can add some lime material to the wardrobe, in order to keep the wardrobe dry!

Four: tungsten lamp, it can not only illuminate but also help me keep the inside of the wardrobe dry, in the wardrobe, we only need to install a 5-8 degree ordinary tungsten bulb, open at night or in a very humid situation, you can keep the humidity inside the wardrobe at about 30, this method has been proven to be very effective so far, you can give it a try.

Five: lacquering, we had better paint the wardrobe a few more times, the general solid wood furniture products on the paint is impossible, only many times, uniform paint can make the surface of the home look smooth, and flat, at the same time can also play a certain role in preventing moisture, if the wooden wardrobe is moldy, we can brush it with a layer of paint will be multi-layered!

Brush with a matte anti-mildew paint and put some desiccant in the cabinet and you're good to go.

The wooden wardrobe in your house is always moldy because the place where it is placed is a relatively shady place, polite and not circulating, and sometimes it will be damp when it rains, and you don't clean it in time. I used to have the same wardrobe, but then I put less things in the closet, keep it polite and ventilated, or move it to a well-lit place.

The best way is to get rid of the existing mold and at the same time inhibit bacteria, so that there will be no follow-up troubles, sincerely recommend the use of wood mold remover, it is best to use the original imported American Mahor mold remover, many wood mold households trust it.

The wardrobe is moldy, mainly because the humidity is too high, usually not at home to remember to close the door and window, and the clothes should be fully dry before putting in. You can use a hair dryer to dry the moldy position, and then buy a bottle of water-based varnish, and brush it once should be solved.

The wardrobe is moldy because of dampness, and if the mold is not treated in time, it will emit mold spores, and the clothes placed in the wardrobe will also be contaminated with mold, so that not only can not be worn, but people will also cause a series of health diseases when they come into contact with moldy clothes. The commonly used mold removal method can only solve the temporary worry, not a long-term solution, especially in the summer rainy season and after the winter heating, the indoor air temperature and the wall temperature in the wardrobe contrast greatly, which is easy to condense water vapor and cause dampness and mildew. It is recommended to use a dynamic insulation board, which is attached to the inside of the wardrobe, so that the wardrobe is completely isolated from the air by the wall, so that water vapor can not penetrate into it, and there is no need to worry about condensation on the surface of the wardrobe, which will not cause mildew due to moisture.

Hope it helps.

The moldy planks are concluded from this:

Usually this board is not cleaned very much.

Normally, the place where the plank is placed may be wet.

I don't usually use this plank much, do I?

As long as the board is cleaned frequently, do not get wet, and it will be fine to dry after wetting.

It has no effect on the fetus, because the mold is not harmful to people, or it is said that cutting vegetables does not bring these unclean things. It's not air pollution, chemical composition, it's the landlord who thinks too much.

Hello! You can wipe the mold from the board, and then spray it with Mrs. Ash anti-mold agent, and let it dry naturally so that it will not mold again. If the amount is large, you can use Mrs. Ash antifungal concentrate, this bottle can be mixed with a lot of water.

Antifungal agents can kill mold spores, prevent mold from multiplying, and prevent mold for a long time.

If you can't wipe it off, you can use sandpaper to polish the surface of the board, and the mold is generally only on the surface, so it is easy to deal with.

Hope it helps!

It is the result of the wood not being fully dried and not treated with antiseptic, and it is recommended that the surface be polished twice.