What kind of tiles are suitable for the bathroom?

What floor tiles are good for the bathroom.

1. Vitrified bricks.

The water absorption rate of vitrified bricks is low, and the surface is polished into a mirror, but due to its strong hydrophilicity, it is more non-slip when exposed to water, and the more water there is, the more astringent the brick surface will feel.

2. Glazed tiles.

Glazed bricks are smooth and flat, rich in patterns, corrosion-resistant, easy to clean, and are often used in kitchens and bathrooms, and glazed bricks have high water absorption rate and small water absorption expansion, but they are in a freeze-thaw state for a long time, and there will be peeling off the skin, so they can not be used outdoors.

3. Mosaic bricks.

Mosaic bricks are made up of small bricks that have gaps between these small pieces to enhance their slip resistance.

The first problem to consider when laying tiles in the bathroom should be anti-slip, anti-fouling, and water absorption, and then it is beautiful! The design of the bathroom at home, the gray system of Eagle 2086 for the floor, the whole is very simple and not so fancy, and the embellishment of the entire bathroom has set aside a pot of shade-loving green plants, so that the whole space is not so lifeless.

The number of tiles in the bathroom should be small, not too smooth, the bathroom often has water, it must be non-slip, the tiles can be, and at the same time you should choose some of the best ones, do not seep water.

Of course, the fairy is o The fairy is of course the kind of anti-slip, the floor tiles will be better, and it is also the most suitable, because why is it actually wet every day, so it must be non-slip.

The tiles in the bathroom must be non-slip, because it is easy to fall in the bathroom, and it is best to choose dark tiles in color, so that it will not be old and will not obviously feel dirty.

If the bathroom is tiled, it must be paved with anti-slip and wear-resistant is better, because people have to go to the toilet often, and take a bath or something in the toilet, there will be a bath, and it is easy to fall down if there is water.

It is recommended that the tiles in the bathroom be paved a little smaller than better, because there are more small gaps and it is easier to prevent slipping.

Bathrooms are relatively small, in order to reflect the water, all use 3ox30 light color tiles, according to the like non-slip, or good absorption of glazed tiles, the bathroom often baths the ground with water stains, considering that it is also important to prevent slipping.

Bathroom tiles should be preferred non-slip, wear-resistant tiles. When choosing ceramic tiles, you should choose products that have regular manufacturers, and have product certificates and corresponding test reports. to ensure the quality of the tiles you buy.

It's hard to ask this question because everyone's aesthetic views are different, economic conditions are different, and hobbies are even more different, so all the answers drawn are naturally different. It will make you dazzled and unable to choose, you still have to make your own decisions about your own family, and other people's opinions can only be used as a reference, without much value.

The bathroom is paved with non-slip tiles, and the right side is thicker, so that it can be anti-fouling and anti-slip is the most suitable for the bathroom.

It is recommended to lay some non-slip tiles or slightly darker tiles in the bathroom, so that it is easier to clean.

It mainly depends on your own preferences, and the general bathroom is a relatively dark floor tile, so it is not easy to get dirty.

It is best to use the small 300 by 300 mm non-slip tiles for the floor tiles on the bathroom floor, because the drainage slope is easier to grasp when this kind of tile is paved, and the anti-slip effect is good.

The bathroom wall can be white, so that it is bright. The floor is paved with non-slip floor tiles.

What kind of tiles are suitable for the bathroom, you ask? I think it's best to wear the bathroom with white walls and white tiles on the floor and non-slip tiles.

Features:The surface is not glazed, and the material and color of the front and back are the same. Pros:

High wear-resistant and anti-slip coefficient. Cons:The pores are large and easy to hide dirt and dirt.

Usage:It is mainly used on space grounds.

Types of bathroom tiles.

1. Polished tiles.

Polished tiles are hard and wear-resistant, suitable for use in indoor spaces other than bathrooms and kitchens, but they are easy to get dirty and have poor anti-slip performance.

2. Vitrified bricks.

Vitrified bricks are strengthened polished bricks, the surface is very bright without polishing, but it is dirt-resistant; Vitrified bricks have high wear resistance and are generally used in living rooms.

3. Glazed tiles.

The surface of glazed bricks can be made of various patterns and patterns, which are richer than the colors and patterns of polished tiles.

Bathroom tiles, do pay attention to it, do not pave those bright and smooth tiles, because the bathroom is more humid and easy to slip, so to install non-slip bricks, the choice of tiles can be carried out according to the volume of the bathroom, it is best to choose small pieces not too big.

You need to choose a better quality, must be non-slip, so that you can better use, choose the most expensive, glazed tile.

If the bathroom is tiled, it is still particular, because the bathroom is a place we often use, and there are water stains, so we should choose non-slip.

must be non-slip, only to make, expensive glazed tiles.

Since the bathroom is a humid environment and a place where water vapor gathers, the floor and walls are generally paved with tiles to facilitate cleaning. It is best to use functional tiles for the wall, and AutoNavi energy bricks have the functions of negative oxygen ions and far infrared rays. And use non-slip bricks on the ground.

This reduces the growth of bacteria when it is safe to do so.

1. Bathroom tile tile is divided into whole body tile and glazed brick. The front and back of the whole brick are made of the same material, which is wear-resistant and non-seepage. The surface with convex stripes has good slip resistance and abrasion resistance.

The glazed bricks are glazed on the front, with a wide variety of colors, rich colors, good decorative effects, high hardness, and easy to clean. Tiles have also begun to be linked to aesthetics, trying to cater to people's needs. Tile carpets with different rules and patterns can make monotonous tiles vivid; Colorful and simple and fashionable flowers, fruit series tiles, novel and beautiful; The pebblestone tiles in the middle require a little more time to take care of, but they can be used for fitness.

2. The plastic floor is similar to the pattern of marble. Relatively speaking, the plastic floor is easy to pave, can also be disassembled, and has a good foot feel, which is suitable for renters who often move. 3. Bamboo flooring is not much in China with bamboo flooring to pave toilets, and it is very marketable in Japan and some countries in Southeast Asia.

Its natural color is very beautiful, and it is elastic, moisture-proof, non-moldy, hard, warm in winter and cool in summer. The curved surface of bamboo is used as the appearance surface, which has a unique charm and caters to the current concept of environmental protection, and is an attempt by people who like nature. 4. The stone has naturally generated colors and textures.

However, if it is used in the bathroom, it needs to be treated with anti-slip. The disadvantage is that the pavement process is demanding, the cost is high, and the quality determines the quality.

Darker, non-slip floor tiles.

Idle ground tiles, depending on your own situation, if you want to buy good tiles, you can buy some big brand tiles, tiles only need to buy 300 300 tiles, because the ground tiles do not need to be too big, because when you paste the water, there is also a better time to find a broken belly, if the four sections are too large, it is not easy to find a good slope and the water is not easy to mix.

Of course, the bathroom should be paved with a darker color, the non-slip floor tiles are better, I think they are more durable, and they are also more durable, the bathroom must be paved with non-slip floor tiles, because it is easy to fall.

The bathroom is a damp place, and the tile color is dark, which is also dirt-resistant, and the material is non-slip. Remember to do a good job of waterproofing the bathroom

It is better to paste non-slip, anti-stain tiles!300 300 will do! You can find a good slope!

The floor tiles of the bathroom floor are all porcelain non-slip and dirt-resistant.

It is better to paste non-slip, anti-stain tiles!300 300 will do!

It's hard to answer this question, everyone's aesthetic views are different, economic conditions are different, and hobbies are even more different. So the answer is naturally different, other people's opinions can only be used as a reference, there is no value, and you still have to make your own decisions about your own family.

It's good to be rough, and it's not easy to fall without slipping.

Of course, it is better to lay tiles in the bathroom, and you should choose special bricks for the bathroom, because the anti-slip degree of this kind of brick is relatively good, and it is also very suitable for use in the bathroom; Floor tiles are made of clay, while tiles are made by grinding and pressing and other techniques, floor tiles are generally used for the floor of the square living room, and tiles are mostly used for walls.

I think that in the bathroom, I still choose to lay tiles, small tiles are patterned, and non-slip bricks are better; The choice of floor tiles is relatively large, according to the material can be divided into many kinds, most of them are used in public buildings and some civil buildings on the ground or floor.

It is better to lay tiles in the bathroom, in fact, we mainly consider the waterproof performance of the tile itself, as well as the anti-slip function of the tile, the most important of which is the anti-slip performance of the bathroom floor tile.

It is better to lay some waterproof bricks. The hardness is different, the quality is different, the moisture-proof effect is different, the anti-skid effect is different, and the installation skills are different.

Bathroom decoration tile selection:

Choose tiles with low water absorption, generally speaking, high-quality tiles have very low water absorption, so that they can dry quickly. If the tile does not indicate the water absorption, you can use tea or water droplets on the back of the tile, and check the diffusion degree of the water droplets after a few minutes. Tiles with high water absorption rate will be cracked on the surface of the tiles and peeling off the entire wall and floor tiles after thermal expansion and contraction.

Choose tiles with high texture density, when buying tiles, you can observe from the side whether the brick surface is flat and whether there are pinholes of uneven thickness. At the same time, you can tap the tile to listen to whether the sound is crisp, the more brittle the sound, the higher the texture density of the tile, the better the hardness. Such tiles are laid into the bathroom space, which is not easy to damage and easy to maintain and clean.

If you choose dry and wet decoration: that is, the separation of the shower area from the toilet and basin area. Through different tile materials and color varieties, a good division can be achieved, so that the two do not interfere with each other, and avoid the embarrassment of splashing and wiping after bathing.

This is a more common decoration method in foreign countries.

In home decoration, the decoration of the bathroom is a very important part, so many owners have put a lot of thought into the bathroom decoration. In the bathroom decoration, in addition to the necessary sanitary products such as basins, toilets, showers, faucets, etc., ceramic tiles are also one of the key elements in the bathroom decoration. The following Beijing home improvement network will analyze some problems that need to be paid attention to in the decoration of bathroom tiles from the perspective of ceramic tiles.

First, let's take a look at the choice of tiles. Bathroom tilesIn general, glazed tiles are chosen. The surface of this tile is coated with a layer of colored glaze, which is more colorful and easier to clean and maintain.

For bathrooms, in addition to comfort, they must also be beautiful and tidy, and for this, glazed tiles are a better choice. Secondly, the matching of colors. Generally speaking, the style of the bathroom determines the choice of tile color, such as the fashionable one is suitable for brighter colors, the simple type is more suitable for light colors, and the ancient ones can be matched with some more dark tiles.

The second is the quality of the tiles. This is a cliché, but it is also the most important point. Decorating a bathroom is about enjoying life, and no one wants to have to pay the price of their health while enjoying it.

The quality of some tiles is not up to par, and the rays produced when the chemical elements in the raw materials decay will cause certain damage to the human body. Therefore, when decorating, you must choose some high-quality brands, such as special ceramics. After laying the ceramics, we should also pay attention to maintenance, otherwise the service life of the ceramic products will be damaged, which will have an impact on the overall aesthetics of the bathroom.

First, it is necessary to pay attention not to use strong acid cleaning agents, which will accelerate the aging of tiles and make the surface of tiles easy to powder. Second, after the tile gap is decontaminated, a waterproof agent can be properly applied, which can not only prevent water seepage, but also prevent the growth of mold.