How can you make a vigorous and simple wolfberry bonsai? What should I pay attention to?

In the process of making wolfberry bonsai, it is important to pay attention to the management of soil and moisture. Goji berry is a very warm and tonic herb. Bonsai production should also pay attention to protecting the original state of wolfberry.

The best way is to keep pruning and dwarfing, so that you can get the effect you want, pay attention to apply more nitrogen fertilizer, which will help the growth of goji berries.

Pile selection Most of the wolfberry stumps are excavated in the field, and wolfberry is very common in the mountains or fields in the northern region. To make bonsai to choose perennial old piles, when digging first cut off the upper messy branches, wolfberry roots are more developed and deeply rooted, digging to open the hall to minimize root damage.

Potting Before potting, prune off the stumps, miscellaneous roots, and overly long roots of the wolfberry pile. Then soak in water for about 30 minutes, and then put on a pot to plant it. The potting soil can be fertile and breathable sandy loam soil, watered thoroughly after planting, placed in a ventilated place for a week of maintenance, and then gradually exposed to astigmatism.

Watering wolfberry has strong drought tolerance, and daily watering should turn the potting soil white before watering, which is both "dry and wet". Note that stagnant water cannot often form in the pot, which is easy to cause root rot.

4.Fertilization wolfberry can be applied some organic fertilizer after decay during the growth period, such as soybean cake fertilizer water, etc., to "thin fertilizer diligent". There are two dormant periods for wolfberry to stop fertilization, one is the hottest dog days in summer, and the other is when it starts to dormant in winter.

Using wolfberry stumps to make bonsai is also a way for many flower lovers. Every summer and autumn, the branches are covered with red wolfberries, which is also very beautiful. So how do you make a bonsai out of a goji stump?

Let's go with Uncle Gardener to learn how to make bonsai from Laodui wolfberries. 1.Transplant as soon as possible.

Goji berries will sleep in winter. If you want to transplant, it must be early, the survival rate is high, and the later growth is better. Transplanting in the north is best done at the end of February when the ground is frozen, and in the south it is best to do it at the end of January and the beginning of February.

If transplanting is too late, the buds of wolfberry have sprouted, and the root system has begun to grow, and the survival rate is difficult to guarantee. 2.Structural modelingGoji stumps themselves have different shapes and characteristics, so determine the shape you want to shape according to different shapes.

Common shapes include bent dry type or cliff dry type, which can be made into a bridge type, or various shapes such as imaging type, root type, and multi-dry type. The specific shape should be determined according to the shape of the residual limb itself, and it is not a fixed modeling pattern. 3.

The reasonable pruning of the wolfberry stump shape is inseparable from the reasonable practice of stove scissors, and reasonable pruning can play an auxiliary role. 1. Cut off the branches and leaves that affect the growth and appearance of the plant, thin the branches and leaves, and cut off the weak branches, too dense branches, cross branches, and overlapping branches in time, which can reduce nutrient consumption and promote growth, which is conducive to aesthetics. After that, trim the branches according to the desired shape.

Goji berries grow quickly, and it's okay to prune them a little heavier. 4.The branches of goji berries are softer, and you can also pull the branches to shape the shape you want.

This method is suitable for 1-2 year-old shoots. You can use a rope or wire to pull the upright branches apart or lift them at a large angle to make the branches look like they want. 5.

Climb up with a small wire and tie it, wrap it around the branch you want to change, and twist the angle and direction of the goji branch little by little. Once the branches are set, it's time to unwrap the threads on them.

1. When the wolfberry begins to germinate in April, choose a plant with a better pile head, cut off the long branches, cut off the messy branches, and then dig out carefully to ensure the integrity of the roots, and then put them into a plastic bag and tie the bag mouth to avoid water evaporation.

2. For potting, it is best to choose a pot with a diameter of about 20 cm, and then match it with loose soil. Before planting, prune the plant properly, dip the roots of the plant in mud, and put it in a pot.

3. Shape, according to the characteristics of strong wolfberry germination and rapid branch growth, it is most appropriate to make the plant into an umbrella-shaped and floor-shaped shape.

Precautions for the maintenance of wolfberry bonsai.

The amount of water used to plant wolfberry bonsai is a must, and it is enough to moisten the soil layer at ordinary times. It is necessary to avoid pouring too much water, so that there is stagnant water in the pot for storage.

Nutrients: When it is just planted, it is the time when it takes deep roots, and it is not allowed to fertilize at this time. The fertilization time should be three months after planting, and the soybean cake fertilizer can provide sufficient nutrients.

The above content refers to Encyclopedia - Flower Bonsai.

Using wolfberry stumps to make bonsai is also a way for many flower enthusiasts, and every summer and autumn, the branches are hung with red wolfberries, which is also very beautiful. So how do you make a bonsai out of a wolfberry stump? Let's go with Uncle Gardener to learn how to make bonsai with wolfberry old piles.

1. Transplanting should be done as soon as possible.

Goji berries will be dormant in winter, and if you want to transplant them, you must do it as soon as possible, the survival rate is high, and the growth will be better in the later stage. Transplanting in the north is best done at the end of February when the ground thaws, and transplanting in the south is best done at the end of January and early February. If the transplanting is too late, the new sprouts of wolfberry sprout and sprout, and the root system has begun to grow, and the survival rate is difficult to guarantee.

2. Structural modeling.

The shape of the wolfberry stump itself is different, and each has its own characteristics, so it is necessary to determine the shape you want to create according to the different shapes. The common shape is the curved dry type or the cliff type, which can be made into a bridge type, and can also be made into an elephant form, a root type, a multi-dry type and other shapes, and the specific shape should be determined according to the shape of the stump itself, not a fixed modeling mode.

3. Reasonable pruning.

The creation of wolfberry stump shape is inseparable from reasonable pruning, which can play an auxiliary role. First, cut off the branches and leaves that affect the growth and aesthetics of the plant, thin the branches and leaves, and cut off the weak branches, too dense branches, cross branches, and overlapping branches in time, which can reduce nutrient consumption, promote growth, and also be conducive to beauty. After that, prune the branches according to the desired shape, and the growth rate of goji berries is fast, so it is okay to prune heavily.

4. Pull branches. The branches of wolfberries are soft, and they can also be pulled to create the desired shape. This method is suitable for 1-2-year-old branches, and you can use rope or wire to pull or lift the upright branches at a large angle to make the branches look like they want.

5. Climbing. Use a small wire to wrap it around the branch you want to change, twist the angle and direction of the wolfberry branch little by little, and wait until the branch is finalized, you can disassemble the wire on it.

Therefore, you can use the characteristics of wolfberry branches that are easy to take root and root to sprout, and the stump is planted upside down, that is, the stem after pruning is buried in the soil, and the original roots are pruned and cultivated as branches, so that you can cultivate a pot of old and slow, crooked wolfberry bonsai, and the production method is as follows:

1. Sow seeds with seeds, bury wolfberry seeds in potting soil, water them with enough water, place them in a cool and ventilated place, keep warm and moisturize, and they will sprout and grow soon;

2. Cuttings in spring or rainy season, this method is faster than the sowing method, but the shape is not ideal;

3. Go to the field to dig up the thick and healthy wolfberry stumps with good growth form, and bring them back for planting.

Goji berries are easy to grow and manage. To make bonsai, one is to sow seeds with seeds, bury wolfberry seeds in potting soil, water enough water, place them in a cool and ventilated place, keep warm and moisturize, and they will sprout and grow soon. However, it takes more time to cultivate a bonsai in this way; the second is to take cuttings in spring or rainy season, which is faster than the sowing method, but the shape is not ideal; The third is to go to the wild to dig up the thick and healthy wolfberry stumps with good growth form, and come back to plant.

This method is fast to make bonsai, but it is difficult to select materials. The growth of wolfberry has a characteristic, that is, there are many branches, clusters, and the branches are not easy to bend. Just this kind of stump bonsai will look monotonous and dull.

Therefore, the stump is often planted upside down, that is, the pruned stem is buried in the soil, and the original roots are cultivated as branches after pruning. In this way, it can be cultivated into an old, crooked wolfberry bonsai.

First of all, choose a plant with thick branches, at least the same size as your thumb, leave about 20 cm in the upper part, and cut off the others, and after planting to grow new branches, bend and tie them according to your needs and preferences. Home cultivation tends to produce less fruit due to fewer insect vectors.