What kind of handiwork can a bottle do, what kind of handwork can a bottle do

Make plastic bottle rocketsTry to guide the baby to make a plastic bottle rocket by yourself, and give full play to the baby's hands-on ability and imagination! Prepare materials: round cups, plastic bottles, cardboard, scissors.

Bottles can be made into airplanes, storage boxes, toy cars, handmade bottles, storage boxes and other handicrafts. hand-made aircraft; Attach the paper to the bottle. Cut out the wings and propellers. Fasten to the plane and it's done.

A bottle can be made by hand with a pointed spout of the ghetto bottle, coin purse, etc.

Some traditional Chinese handicraft projects, such as paper-cutting, handmade cloth and so on, are deeply liked by foreigners, so they have also given birth to the increasing prosperity of the domestic handicraft industry, some handmade small workshops have also grown, many have started import and export business, and at the same time, they have also made great contributions to improving the domestic employment rate and promoting economic development.

A bottle can be made by hand with a pointed spout of the ghetto bottle, coin purse, etc.

1: Ingredients for needle-nosed ghetto bottles: lighter, plastic bottle, toothpick.

Heat the cap with a lighter.

A little softer is fine.

Poke a toothpick up from the inside of the cap.

The softened plastic can easily deform.

Use scissors to cut off the tip of the nose to leave a hole.

Fill the sauce and cap the bottle.

DIY handmade encyclopedia of turning waste into treasure with plastic bottles.

2: Poke through the cap with a toothpick.

The softened plastic can easily deform.

Use scissors to cut off the tip of the nose to leave a hole.

Coin purses. Cut off the bottoms of the two plastic bottles.

Glue the zipper inside both bottles with hot melt adhesive or 502.

Cut off the extra zipper and you've done it.

Answer: 1. Separate the egg whites and yolks in plastic bottles. Squeeze the bottle flat, and as soon as the mouth of the bottle is loosened against the egg yolk, the egg yolk will be sucked into the bottle, and the egg green is still making a watering can in 2. Stick a needle or awl on the cap with a sparse eye of different sizes, and a simple and convenient small watering can is made.3 Cut the plastic bottle of Sprite, Coke and other drinks from 7 cm to 8 cm from the bottle mouth, remove the cap, and turn it upside down to make a simple funnel.

4 Make hangers.

The handiwork that can be done with a bottle is as follows:

1. Small footstool.

When lying on the sofa at home, it is often more comfortable to have a footrest.

We can make this footstool out of a plastic bottle.

Specifically, it is to pick more than a dozen large Coke bottles, half of which is cut off from one-third of the bottle head, which can be used to plant flowers.

The rest is set in twos and twos, as shown in the picture below, and then tied up with scotch tape.

In this way, you can see the prototype of the footstool.

For extra comfort, add a pillow on top of the plastic bottle.

Finally, wrap it in your favorite fabric.

Like this, a beautiful little footstool is made.

In fact, the shape can be various, depending on one's play.

The simplest is a quadrilateral, which can also be made into a hexagonal shape or a circle.

Foreign netizens have posted their masterpieces, although the footstool made of plastic bottles is not the same, but the finished product is really amazing.

When the bottle is sealed, the gas inside will not escape, so it can bear a lot of weight, and it is no problem to assemble multiple bottles and sit on a 200-pound fat man.

2. Sofa. With the footstool, some people will ask, can you make a sofa out of a plastic bottle?

Foreign netizens really found out, not only sofas, but also beds, TV cabinets and coffee tables.

If the outside is wrapped in a layer of leather, if not said, basically no one will be able to guess that the sofa is made of plastic bottles.

The sofa was done, and foreign netizens also solved the bed, TV cabinet and coffee table at home by the way.

Take a look at the whole set below, it looks like it's presentable.

If this kind of furniture is mass-produced, it will be easy to move it home without having to move it yourself.

If it rains heavily and floods one day, furniture made of plastic bottles may be able to save your life.

3. Trash cans.

Not only is the plastic bottle easy to use, but the lid of the plastic bottle is also a place to play the brain.

With the collected plastic bottle caps, one by one, and then fixed with glue, a beautiful trash can is completed.

It can also be used as a trash can with a bottle.

Make a simple stand with iron wire, and then put the plastic bottles one by one to fix them. So you get a trash can made of plastic bottles.

About the bottle can do what manual is as follows:

1. Make a small watering can: some beverage bottles are delicious in color, it is a pity to discard them, and they can be used to make a very practical small watering can.

2. Measuring cups: Some bottles (such as discarded milk bottles, etc.) have scales, as long as they are slightly processed, they can be used to make measuring standards.

3. Make the clothes smell good: Don't throw away empty perfume bottles, lotion bottles, etc. immediately, open their lids and put them in the clothes box or wardrobe, which will make the clothes fall and become fragrant.

4. Rolling noodles: When rolling noodles, if you can't find the rolling pin for a while, you can use an empty glass bottle instead, and roll noodles with a bottle filled with hot water, which can also make the hard noodles soft.

5. Remove wrinkles on the tie: The wrinkled tie can be made smooth and beautiful without ironing, as long as the tie is rolled on the cylindrical beer bottle, and the original wrinkles will be eliminated when used the next morning.

6. Protect the watch: cut the small plastic bottle, put the watch on it, draw the shape of the watch with a ballpoint pen and cut it according to the same, cut out the long opening of the strap on both sides, wear the strap out of the mouth, and then pass through the bolt at both ends of the watch, and wear it on the hand, which is smooth, sweatproof, and not easy to fall off.

7. Funnel: cut from the middle of the empty bottle with scissors, the upper part is a very practical funnel, and the lower part can be used as a water cup.

8. Chopsticks: Wrap the glass bottle from the neck of the bottle with a circle of cotton yarn soaked in alcohol or kerosene, light it and put the bottle in cold water when the fire is about to be extinguished, so that the glass bottle will be cut neatly, and the bottom half of the chopsticks is also very practical.

9. Wind lamp: cut off the bottom of the glass bottle, insert it into the lamp holder made of bamboo tube, make a few small ventilation holes on the bottom of the lamp holder, and open a few gaps on the bottom edge of the bamboo tube, so that the lamp is placed on the table, and the air can enter from the gap.

10. Goldfish bowl: The thick glass bottle can be made into a goldfish bowl according to the method of chopsticks, and a rubber tube is installed on the following bottle stopper, so that the goldfish can be changed without fishing out.

11. Make chandelier cover: Find a large, colorful, empty wine bottle with a cap (such as a brandy bottle, etc.), cut the bottle and polish it smooth, install the chandelier head and bulb in the bottle, drill a hole in the original bottle cap, let the wire pass through, and screw the cap. Put an 8 cm long colored plastic tube on the neck of the bottle and put a circle of golden sticker in the middle of the bottle to make a beautiful chandelier.

Bottles can be made by hand, which are bottles that look like lanterns, bottles that are strangely shaped, and bottles that are simple and beautiful.

Blind bottle like a lantern:

1. Fold out the approximate shape of the bottle.

First, take a square piece of paper, fold it diagonally in half twice, then open it again and fold it in half twice horizontally and vertically. Then fold inward according to the crease to become a square, and then fold the small triangle inward with both sides. The same goes for the back.

2. Fold out the details of the bottle.

Then the bottom corner is also folded upward, and then turned over, and then the corner is folded upward, and then the other side is turned over, and the corner is folded inward and then upward.

3. Stretch the bottle open.

Then, in reverse, I fold the top corner flat and restore it. Finally stretch it out. Such a lantern-like bottle is folded.

Odd-shaped bottles:

1. Fold out the shape of the bottle.

First, take out a square piece of paper, then fold it diagonally in half to form a triangle, and then fold one of the corners inward.

2. Fold out the details of the bottle.

Then take out the other ones that have been folded in advance, put them together end to end, and glue them together.

3. Stack several parts together.

Finally, put a few of them together in advance. In this way, the strange shape of the bottle was folded.

Simple and good-looking bottle:

1. Fold out the outline of the bottle.

First of all, take a rectangular piece of paper, draw some lines with a pen in the width ratio of a ruler, cut a piece under it with scissors, and then fold it diagonally according to the lines to fold out the creases.

2. Fold out the bottom of the bottle.

Roll it up again and stick it with a glue stick. Finally, press the bottom inward.

3. Simply adjust the details of the bottle.

Hold it in place and adjust it briefly. Such a simple and beautiful bottle is folded.

You can make a piggy bank out of waste bottles. Materials: Drink bottle, large one, small four, pink paint brush, palette, water, scissors, utility knife, glue.

Step 1: Cut out the shape of a piglet's ear on colored paper.

Step 2: Take out the four small drink bottles prepared in advance, cut off the front end of the small drink bottle, as the limbs of the piglet, and the bottle cap is best kept.

Step 3: Measure the diameter and thickness of the one-dollar coin, and use a utility knife to carve a rectangle of the right size on the body of the large beverage bottle, which is where the coin is placed.

Step 4: Paint the limbs and body of the piglet, or glue it to the limbs and body of the piglet with colored paper.

Step 5: Take out the glue, limbs, and ears prepared before and glue them one by one.

Step 6: Draw nostrils on the piglet's nose and eyes on the piglet's head.