The easiest solution to ask for help is that the toilet tank lid cannot be opened, and the toilet ta

There are two buttons above the toilet lid, press any of the buttons, and then use the flat mouth to change the cone or a knife, and the process should not be too strong, otherwise the toilet lid will be easily damaged; After taking out the two buttons, use a knife or trail to unscrew out the fixing screws of the tank cover; Once the screws are removed, the tank lid can be opened.

Some toilet outlet buttons are screwed together with the toilet tank lid, twist counterclockwise, and unscrew the water outlet button to remove the toilet lid.

In this case, you can find a seam in the lid of the water tank, and then slowly force it to open. If it really doesn't work, it is recommended that you find a professional to deal with it.

Just pull it out, that's very simple!

1. First of all, check whether the valve (angle valve) switch of the tap water at home is open.

2. If it is open, then check the flush switch: first check whether the flush switch has elasticity and whether it rebounds when pressed, if not, it means that the spring inside the button is rusty, at this time you can replace the button, or if you are not too troublesome, it is okay to press it several times each time you use it to reset.

3. If the water pressure is too low, it is difficult to get into the water. The low water pressure may be caused by the high floor of the house or the overall water pressure of the community, or it may be caused by the water pressure being too low due to the water valve being opened too small.

4. Open the water tank cover to check whether the triangle valve is blocked, if the triangle valve is blocked, the toilet can not be watered, you can disassemble the triangle valve to see if the connection with the inner wire is blocked, and see whether the valve core is open and closed normally.

5. After the toilet is used, the toilet does not have water, which is generally a blockage problem, at this time, you can use some waste toothbrushes and other tools to clean the water parts and filters, of course, with limescale cleaners, the cleaning effect will be better. You can also add some scale remover to the water filler to remove the scale, which is less likely to clog.

6. The toilet can be solved by adjusting the height of the pontoon, and the toilet tank cover will be pushed to the inlet valve, and the inlet valve needs to be adjusted until the float or float of the inlet valve moves freely, and the water generally cannot come in if the floating bucket is stuck.

If the toilet tank is not watered, you can directly add water to the water tank, and the toilet is not watered because the pipeline is blocked, and this needs to be cleaned.

First of all, you have to understand, what is the reason for not going to water? Then find a solution, the easiest is to change the water set for him.

There are many reasons why the toilet tank is not watering? Be sure to check whether there is water in the water pipe and whether the switch is intact in time.

Summary. How to open the toilet tank lid, according to my experience, check two aspects:1

Adjust the lever under the drain button (turn the lid of the tank upside down) 2Check whether the automatic water switch in the water tank is properly returned and sealed tightly! If the above methods cannot solve the problem, it is recommended to give the toilet manufacturer after-sales service for professional consultation.

The hardware in the water tank is warranted, don't ignore this!

How to open the toilet cistern lid, according to my experience, sell spring to check two aspects:1Adjust the unmatched touch lever under the drain button (turn the lid of the water tank in reverse to see the noise) 2

Check whether the automatic water switch in the water tank is properly returned and sealed tightly! If the above methods cannot solve the problem, it is recommended to give the toilet manufacturer after-sales service for professional consultation. The hardware in the water tank is warranted, don't ignore this!

There are many types and models of toilets, and different types of water tank covers are opened in different ways. Generally, the lid on the toilet tank can be lifted directly by hand, but some water tank lids have bayonets, which requires some skills from the draft beam. Another thing is to squeeze it by hand and then pick up the lid so that the lid can be easily removed.

Ordinary toilet flush tanks are installed according to the siphon principle. When in use, after the inverted U-shaped tube is filled with liquid, the high end of the opening is placed into a container with liquid by using the liquid level difference force, and the liquid in the container will continue to flow out from the lower part of the opening through a siphon. Slow down early.

If the toilet lid tank won't open, it may be because the tank is badly rusted, leaking, or tightly sealed. Here are some possible solutions:

1.Lubricate with oil:

Try spraying some oil between the tank lid and the tank, wait a few moments for it to penetrate, and then gently turn the tank lid with a wrench. If this method doesn't work, you may consider using a hammer and a sharpcore screwdriver to tap around the lid to loosen the lid and open the tank.

2.Removing the Tank Cover:

Another way is to simply remove the entire tank cover, which requires you to remove the screws on the tank cover with a wrench and then gently take the tank cover out. This method requires you to have a certain level of skill.

3.Safety first:

Whatever method you use to quickly open the tank lid, it's important to be safe. When using a hammer and screwdriver, make sure to stand steadily on the ground and keep the direction of the tool's movement away from you. If you are unsure about these operations, it is advisable to consult with a professional or ask them for help.

In conclusion, if the toilet lid tank won't open, you can try to use oil lubrication or remove the water tank lid to solve the problem. But please note that safety always comes first. Seek help from a professional if needed.

Why can't you open the water on the toilet box, hello, 1. Put the water in the water tank first, it is difficult for you to remove it if there is water pressure. 2. There is a metal or plastic clamp at the water inlet of the water tank and clamped with a wrench, and there is also one in the silver dry of the water tank, which can be screwed with a wrench, pay attention to the strength, do not use brute force. 3. There is also no place for a wrench in the water tank.

You hold the bottom of the hardware inside and screw the metal or plastic clamp on the outside of the tank inlet in the sail hole. 4. There is another possibility, that is, when installing the water tank, the glue (glass glue or PVC glue) used by the plumber for you is smeared on the thread buckle of the accessories, and it is difficult for you to screw. If it's a plastic fitting, it's almost impossible to twist.

If it's a metal fitting, you can still twist it when you take it slowly. Finally, big brother, you can pay attention to the direction of the twist, you can't be awkward in the wrong direction. Generally speaking, the counterclockwise below is tight and clockwise is loose.

The bottom of the tank is loose counterclockwise, and clockwise is tight (see the direction of the silk mouth hunger). I hope my answer is helpful to you, and finally I wish you good health and a happy mood again! <>