Is it better to lay flat or lock solid wood multi layer flooring?

I have chatted with some masters who specialize in flooring before, they think that solid wood multi-layer flooring is better than flat insertion, first of all, solid wood flooring is easy to be affected by thermal expansion and cold contraction, with flat insertion method, it will be more stable, if it is a lock method, the strength will be slightly larger will be easy to pull off, so the construction, may be more laborious. Flat solid wood multi-layer flooring is a more traditional practice, although it is now used less, but its other advantage is that the later maintenance will be more convenient, and it will be much easier to check and disassemble than the lock. However, there are also some masters who do not agree with the flat insertion method for solid wood multi-layer flooring, and think that it is better to lock it.

Relatively speaking, it is better to be flat, because for the multi-layer floor of the flat, it will be more stable, and the later maintenance is also more convenient and practical.

It is better to choose a latch for solid wood multi-layer flooring, because it prevents cracking of floor joints, and it is easy to install and can be used many times.

If it is a reinforced laminate, it can be locked, and the laminate flooring has good stability and small water absorption deformation rate.

It is not recommended to lock the solid wood composite and solid wood, or the flat buckle is better. Because the deformation rate of solid wood composite and solid wood is relatively high, it is easy to expand or contract, and the greater the force may directly pull the lock off. When installing the flat buckle floor, it is necessary to reserve sufficient shrinkage joints on the side of the wall and install springs in the shrinkage joints.

All solid wood floor consumers must make it clear that solid wood flooring is better than flat buckles, and there will basically be no locked solid wood floors in the market.

Analysis: Advantages of flat flooring.

1. From the point of view of solid wood floor paving and splicing, solid wood floor has the property of thermal expansion and cold contraction, and the flat solid wood floor can make the solid wood floor automatically adjust without damaging the floor itself.

2. When the lock mouth solid wood floor expands, the volume of the solid wood floor will change and increase rapidly due to shrinkage, so there will be arching phenomenon.

3. The splicing method of solid wood floor lock is a waste of resources, and the material rate of the buckle groove is wider and the material rate decreases and the cost increases, so that the quality of solid wood floor products will increase.

Flat buckles are the best way to splice solid wood flooring for the following reasons:

1 The processing technology of solid wood flooring is the most complex and difficult of all flooring categories.

2. Solid wood flooring will have the natural properties of thermal expansion and cold contraction, and the splicing method of flat buckle can be automatically adjusted when thermal expansion and cold contraction, and will not damage the floor itself (at most, it is assembled and separated, which can be easily adjusted and will not affect the use), so it will not cause damage. On the contrary, when the locking splicing floor is expanding, because the buckle is too tight, there is no buffer space, the joint will arch up when expanding, and the shrinkage will crack the floor itself, directly destroying the floor itself, resulting in cracking damage and scrapping, and the risk is very large.

Each has its own characteristics.

Flat floor refers to the installation of the floor needs to be fixed with the help of glue, nails, etc., lock floor is nail-free, glue-free, keel-free and other floors, these two kinds of floors are very common in the market, flat floor and lock floor compared with there are many differences:

The first is laying, the laying of the lock floor is simpler, there is no need to hit the keel in advance during the laying process, do not use glue, etc., the laying effect is better, the flat buckle floor laying is more troublesome, to have the keel, you also need to use glue and nails, etc., in this regard, the lock floor is better.

Secondly, in terms of cost, there is a difference between the flat floor and the lock floor in terms of cost, the flat floor uses more materials, and the labor cost is also higher.

Finally, the degree of durability, the flat buckle floor is more durable, under the thermal expansion and cold contraction, the possibility of deformation of the flat buckle floor is smaller, and the deformation and arch of the lock floor are greater, and the lock floor is a little worse in this regard.

Nowadays, there is a lot of competition in the home improvement industry, and many products have also entered our lives. Make our construction more convenient. Let our decoration effect also have a good reflection.

In the process of constantly innovating, we have oursSolid wood locking flooring。Let's find out with us, is the solid wood lock floor good? Let everyone have a good choice when they choose.

First, is the solid wood lock floor good?

1. First of all, let's understand the product lock floor (also known as mandarin duck buckle), which everyone knows. It is the patented technology of Shandong Ding Yuxuan floor (patent number: , the buckle type is tightly combined, which overcomes the problems of separation, warping and drumming caused by the cold and hot dry and wet changes of most floors in the outside world.

Completely nail-free, glue-free, keel-free, directly laid on the ground, saving the height of the room, and can be repeatedly disassembled and used, economical and practical, than the conventional floor per square meter to save about 20 yuan of pavement costs.

3. Our construction is very convenient, and the lock floor can be paved without glue, which feels particularly fast. Ordinary flat buckle wood flooring needs to be connected with adhesive in the paving process, but the adhesive is easy to cause indoor pollution, even if it is glue-free, the joints of the floor are very tight, and there will be no cracking, bulging and other problems due to the change of temperature in the four seasons.

Second, how to pave the lock floor.

1. When selecting materials, the locking floor has stricter requirements for the substrate, so the construction is very convenient. Under normal circumstances, the locking floor can withstand a tensile force of 450 kg, so the physical properties such as density, relative humidity, and expansion of the locking floor substrate are more stable. It can withstand about 450 kg of stability, humidity and expansion, and the performance is very stable.

2. The high-quality product lock floor paving is simpler, the joints are tighter, and the decoration effect is very good. The overall pavement effect is good so that the wooden floor will not appear waves, so that the surface of the wooden floor is very smooth and flat, so as to reduce the error caused by manual paving, and the value of the floor temperature will only extend to both sides after the temperature rises, so as to solve the inherent problems of the floor and make the overall pavement effect better.

3. Our construction can be glue-free pavement. The adhesive contains more formaldehyde, and it is also very convenient to clean. It is easy to pollute the air if you use too much, and the lock floor is connected by a lock, which does not need to be connected with adhesive, and will not crack and wave with the change of temperature.

Nowadays, many people use our solid wood lock flooring. There are a lot of brawl benefits. Especially in our construction, but also in our long-term use.

There are many types of house floor decoration, including lock floor and flat floor, so what is the difference between the two? PChouse will take you to find out.

First, compared with the traditional flat flooring, the advantages of the locking floor in terms of paving are very obvious. First of all, the locking floor does not need to be ground in advance, which can not only save a sum of money for residential renovation, but also indirectly increase the floor height of the house. For most commercial houses, the floor height of the house is already very mirrory, if the keel can be omitted, the floor height can be increased by 30 to 50 mm, in a sense, it is also to increase the usable space of the house.

Second, and secondly, the locking floor does not need to be fixed with nails or glue when paving. The disadvantages of the traditional pavement method of using iron nails or glue are very obvious, and the iron nails used for fixing by consumers may be loose after a period of use, which will cause the floors to rub against each other to produce noise, and the glue will also lose its adhesion with the slow oxidation, resulting in the loosening of the floor, which will also produce noise.

Thirdly, due to the effect of the lock, the floor of the whole room can form a whole and realize the overall translation. Even in provinces and cities with large temperature differences, the floor is not prone to cracking, bulging and other problems. For example, most of the hot solid wood floors for geothermal heating on the market are made of locking technology.

In short, flat buckle flooring is now gradually withdrawing from the consumer market, and PVC plastic lock flooring is the mainstream of future development. But it is also necessary to carefully select merchants, honest merchants, even flat buckles are worth buying.