Can the wall panel be leveled with empty glue behind the uneven wall?

How to deal with uneven walls? Tricks to deal with uneven walls 1, uneven walls not only bring us visual discomfort, but also after the home appliances are placed, the overall situation will have a sense of gap. Therefore, if you find that the wall is uneven, you must level the wall before painting the wall.

2. If the decoration project is fully contracted by the decoration company, then the wall should be rejected after the problem occurs, and the decoration company should be required to deal with it, and the quality of the repair should be guaranteed. Secondly, we should supervise the renovation company when it comes to wall restoration. 3. In general, there are three reasons for uneven walls, namely local unevenness, large-area unevenness, and errors in flatness, which should be dealt with according to the actual situation when repairing.

4. If the wall is partially uneven, this situation is easier to repair. Under normal circumstances, as long as the paint is applied on the basis of the original putty, and then the wall is smoothed with sandpaper, and then the wall flatness is compared to determine that there is no error before painting. 5. If you find that the error of flatness is within 1 cm when inspecting the wall, and there is no problem with the wall base, you can brush 1 cm to 2 cm putty in this case, and then carry out leveling treatment.

However, if the previous base of the wall is not done well, the original wall skin should be removed and then leveled with cement mortar and gypsum, and finally sanded with sandpaper after brushing putty. 6. If the flatness of the wall exceeds 1 cm and the area is still large, the wall should be completely removed and leveled with cement and gypsum. The above is a detailed introduction to how to deal with uneven walls, and I believe that everyone has a certain grasp of how to deal with uneven walls.

There are many ways to deal with uneven walls, and you can decide different treatment methods according to the size of the uneven tilt of the wall. What you need to pay attention to is that before the wall is treated, you must first determine the flatness of the wall.

It is not possible to level the wall with glue, and you should use a special wall paint to apply and scrape

If the wall is partially uneven, it is easier to repair in this case. In general, in this case, it is only necessary to paint on the base of the original putty. Then use sandpaper to the wall to smooth the effect of treatment, and then compare the flatness of the wall, which can only be painted after confirming that there is no error; However, if the flatness of the wall is more than 1 cm, and its area is large.

This requires all the walls to be eradicated, and cement and gypsum are used to level the place. <>

The reasons for this situation are: 1. Local concave and convex; 2. Large area is uneven; 3. There is an error in flatness. 5. When inspecting the wall, if you find that the error of flatness is within 1 cm, and there is no problem with the wall base, in this case, you can brush 1 cm to 2 cm putty, and then level it.

However, if the previous base of the wall is not done well, it is necessary to remove all the original wall skin and level it with cement mortar and plaster, and finally polish it with sandpaper after brushing putty.