The drain pipe of the Haier drum washing machine is broken, how much does it cost to replace one?

If the water pipe is broken, it doesn't cost much to repair it.

Look at me you will be dizzy, I bought a Haier rose beauty drum washing machine in August 2007, in August 2013 the door lock failed, to the maintenance and manufacturers to call **, reply: 1, no accessories 2, within five years of pipe fittings, within six years of no matter. I don't understand which legal provision this is, is it that Haier washing machines are in line with the idea that consumers will scrap one in 6 years.

Four or five thousand yuan washing machine for their own service concept? Could it be that I.

Four or five thousand yuan of things are scrapped when they are scrapped? If it's been 6 years, I want this model of washing machine, you don't have it, why can't you even find the accessories? This brand will really have to stay away in the future.

The three-year warranty is exceeded, and the maintenance fee is 65 25 yuan for the pipe, and it costs 90 to change the pipe, which is too dark Haier.

This drain pipe doesn't cost much, you can contact the after-sales service directly and let them help you replace it with a new one.

It doesn't cost much, you can buy one and replace it, if not, find an after-sales service to help you change.

The water pipe leaked and checked and found that the joint fell off, wrapped it with tape, and charged me 468 yuan, is the money reasonable? I'm waiting for an answer from Woodpecker?

Go to the repair shop and buy one, just connect it, and put it on it. Very simple.

What about contacting ** for repair? The warranty period has passed.

Summary. Hello dear! The washing machine drain pump is broken, and it takes 80 yuan to replace it, and it depends on your situation, if your brand is well configured, it needs 100 yuan, and if it is the kind of medium, it needs about 50 yuan.

How much does it cost to replace a Haier washing machine drain pump that is broken.

Hello dear! The washing machine drain pump is broken, and it takes 80 yuan to replace it, and it depends on your situation, if your brand is well configured, it needs 100 yuan, and if it is the kind of medium, it needs about 50 yuan.

For example, I last time the drain pump of the Haier washing machine was broken, and then I changed it, it took 60 yuan, and the door-to-door maintenance can be completed within an hour.

You can contact Haier's after-sales service, and then ask him to find the nearest local store to send someone to repair for you, it is very transparent, and will not charge indiscriminately.

1. The drainage pipe is divided into internal drainage pipe and external drainage pipe, the internal drainage pipe is protected inside the machine and is generally not easy to damage.

2. Replace the external drainage pipe by yourself.

1. The drain pipe of the washing machine is generally near the bottom, so in order to facilitate the operation, put the washing machine down first, 2. Most of the bottom of the washing machine is open, and there are also those blocked with a protective plate, and the protective plate must be opened. Look along the drain pipe and look in, you will see the connection part between the drain pipe and the main machine, which is stuck with a type clip, fixed with a fastening ring (plastic nut), and glued together. Remove the bad pipe, replace it with a new one, clamp it with a clip or tighten the fastening ring.

If it is glued with glue, you can also find a thin iron wire and raw material tape.

Fixed. <>

The drains in the upper row are hung up, and the drains in the lower row are down.

The drainage of Haier drum laundry is divided into upper and lower rows. The drain pipe in the upper row hangs behind the washing machine, and the lower drain has to be lowered.

Haier front-loading washing machines are designed with an upper drain and are equipped with a special drain pump to pump out dirty water. If it is not hung up, there may be a problem of draining the water while filling it.

The traditional drainage method of Haier washing machine is upper drainage, and it needs to be pumped to a height of about 80 cm with a drainage pump before draining. Therefore, the location of the drain should be set between 80cm and 100cm above the ground.

If you want to drain directly to the floor drain, fix one end of the drain pipe about 80 cm above the ground, and then insert the other end into the floor drain.

The power cord of the washing machine is generally located on the upper right side of the back wall of the washing machine, which is about 1m2 long, so the socket should be installed within 1m2 from the position of the washing machine.

The water inlet is about 20 cm to the left of the power cord. The drain is located on the lower right side of the back wall of the washing machine. The general situation is that under the condition of Kai, the drainage outlet is 60cm from the ground and 90cm is the clear cherry blossom.

Because the drum washing machine is designed with a drain pump motor, it has the characteristics of upper drainage. If the drain pipe needs to be lowered, one end of the drain pipe should be fixed 60cm above the floor of the washing machine, and the other end should be inserted into the floor drain to meet the design requirements of the washing machine.

This answer applies to any Haier washing machine.

If the connection between the faucet nozzle and the washing machine pipe is broken, it belongs to the faucet accessories, and you can buy a faucet, and they will know if you want to connect the washing machine pipe. The pipe of the washing machine is plastic, if the joint you look like iron, it is the faucet part, buy an ordinary only 20 yuan may be a little more, you can ask the sales department to teach you how to install.

The drain pipe of the washing machine is damaged, in fact, it is very simple to replace, remove a few screws and find a place.

Replacement. If it's just a broken drain pipe, you can go to a hardware store or a big supermarket to buy a new water pipe and replace it, as long as you remember to buy the right size.

This can save a lot of money on the cost of having someone repair it.

This is simple, if the power cord of the washing machine is broken, it is recommended to replace it with a new power cord, because the washing machine is in contact with water at a high frequency, so as to avoid long-term aging and water leakage, and avoid accidents. The water connection pipe is generally larger in the store of Wujinjiaodian, so you can buy one directly.

Haier's after-sales service**, it is easy to find, even if the warranty period is over, it will help you repair, and only some labor costs and material costs will be charged.

The drainage system is controlled by an independent motor, the structure of the drain valve is similar to that of a pump, inside is a plastic rod to push a leather bowl, when the motor is in place, the leather bowl blocks the water outlet; When draining, the circuit board is also started by a MOS tube to control the motor, and when the motor rotates the hole, the plastic rod is pulled back through a steel wire, so that the leather leakage bowl is removed from the drain port, and the sewage is automatically discharged. Disassembly of the drain valve: open the back cover to find the drain retractor, connect the retractor at the bottom of the barrel, there is a drain bottom valve cover (there are four working support points cast on it), use your hand to resist the working support point on the cover, and twist it (straight teeth).

If you can't twist it with your hand, use a slotted screw, Nassomin knife and hammer to resist the working point, and knock it in the counterclockwise direction to open it should be loose, and open it is. Pull. The inner plug, so that the disassembly of the drain valve is completed, and the order of installation is reversed.

You can open the back cover of the washing machine first, and you can see the inner drain pipe, and the drain pipe is directly below the washing machine; After finding a large leak to the drain, remove it, do not pull it vigorously; Remove the inner drain pipe under the laundry drum to imitate the carrying card, and remove one end of the inner drain pipe; Then remove the outer drain pipe, and slowly take out the inner drain pipe from the inside out. Then pass in from the drain pipe position on the opposite side of the washing machine, and install the inner drain pipe; Install the water pipe and fix it.

Daily maintenance of washing machine:

The washing machine has been out of use for a long time, so it is necessary to remove stagnant water and keep it clean and tidy.

It should be placed in a dry, non-corrosive gas, no strong acid, strong alkali erosion, so as to avoid rust of metal parts and reduction of insulation performance of electrical components.

Washing machines that do not have oil filling holes for the wave wheel shaft should be filled with oil once to prevent rust.

Washing machines that are stored for a long time should be covered with plastic film or cloth cover to avoid the erosion of dust and keep the washing machine bright and tidy.

Every other month, the machine should be turned on for trial operation to prevent the parts from rusting and the motor windings from getting wet. Energizing is also a means of drying the windings to avoid failures caused by prolonged downtime.

The washing machine should not be exposed to direct sunlight for a long time, especially for plastic devices, so as not to fade and age.