Can I use a water heater in the bathroom and kitchen?

Shared benefits: Reduced device footprint;

Bad: The power of the water heater must be increased to meet the use of two points at the same time, and the cold water in the middle of each use needs to be discharged before there is hot water; If it is broken, you can't use hot water; The initial investment and maintenance costs of the equipment are large.

Set up separately and independently.

Benefits: Each is connected to its own water pipe, and the pipe is short and heats up quickly.

One is damaged and the other can be used again.

Bad: Takes up space in the room; The initial investment in the equipment is also large, but the single small power** is cheaper.

About hot and cold faucets:

The cold water is connected to your cold water supply pipe, and the hot water is connected to the water heater outlet pipe.

Whether the hot water is enough depends on the power of the equipment you choose and the situation of simultaneous use.

If you don't use it at the same time, a regular water heater will do.

Yes, and you can't simply say whether this thing is good or bad, it mainly depends on the distance between the three main water points. First of all, it is excluded that the subject said in the description that "one water heater is installed in each room", because it is really unnecessary and the cost is too high. You can choose the following three solutions according to your actual situation.

Scheme 1: Suitable for three water points that are very close to each otherIf there are two bathrooms and a kitchen, the distance between these three rooms is very close (no more than 5 meters), then only one water heater needs to be installed. However, due to the large number of water points, you may need to buy a larger water heater, otherwise it will not be enough.

As for the installation location of the water heater, it is recommended to install it in three rooms, and the room in the middle is relatively centered, so that the distance between the water heater and each water outlet point is not too long, which reduces the waiting time for hot water. If the three rooms resemble an isosceles triangle, it is advisable to install the water heater in the room that uses the most water – usually in a certain bathroom, where the kitchen will definitely use the least amount of water anyway.

Scheme 2: Suitable for two bathrooms that are very close to each otherIf the distance between the two bathrooms is relatively close, and the kitchen is far away, this situation is not difficult to solve. All we need to do is put the water heater in any bathroom – preferably in a bathroom that uses a lot of water.

The kitchen can also be called a water point, but the amount of water used is too small. I usually wash dishes and vegetables, and I don't use much hot water at all. A small kitchen treasure can be completely satisfied.

Scheme 3: suitable for two bathrooms are far away If the distance between the two bathrooms is very far, no matter what the distance of the kitchen is, it basically cannot meet the water demand of the family, and the water is used in the bathroom without a water heater, which will inevitably cause a lot of waste of water resources and prolong the waiting time for water.

At this time, it is recommended to use an object called a "hot water circulation pump", as long as the water in the pipe is flowing, it can be opened and heated immediately, without waiting. However, there are two problems when using hot water pumps:1.

The circulating pump is not turned on 24 hours and needs to be turned on before use.

However, today's circulating pumps are becoming more and more powerful, and you can choose a circulating pump with a function of opening or timing when the water is discharged. 2。The effect of the circulating pump without the hot water return pipe is slightly worse, so we need to consider whether to install the circulating pump and bury the pipeline in advance when decorating.

Absolutely.

It is sufficient to lay the hot water pipe to the corresponding location in another space. Generally speaking, if you choose a gas water heater, the gas water heater is installed in the kitchen or kitchen balcony, and then the hot water pipe in the kitchen is laid to the corresponding position of the installation of the shower and wash basin in the bathroom; If you choose an electric water heater, you can install the electric water heater in the kitchen or in the bathroom, and the hot water pipe can be done in the kitchen sink, bathroom shower, and toilet washbasin can be connected in series.

Special note: Gas water heaters cannot be installed in the bathroom.

If it is a house of 100 to 200 square meters, you can use a water heater for the bathroom and kitchen, provided that the distance between the two places is not too far, and the closer the water heater is, the faster the water heats up.

If the house is large such as a villa and the bathroom and kitchen are far away, it is still advisable to use the water heater separately to prevent the water from being heated.

The bathroom and kitchen can share a water heater, install the water heater in the kitchen, use the pipe to the bathroom, and you can do it.

Can I use a water heater in the bathroom and kitchen? The bathroom can be connected to the kitchen with a water heater, as long as the pipeline is connected without any problems.

It is okay to share a water heater in the bathroom and kitchen, but you must choose a water heater with a higher water flow.

Is the house renovated, kitchen and bathroom suitable for shared gas water heater? How to install it more cost-effective and easy to use?

Yes, that's what we have in our house.

Can use a water heater,

Let's start with the conclusion: two bathrooms and one kitchen, it is not recommended to share a water heater!

A house with two bathrooms and a kitchen is basically a relatively large house, even if the area is not large, there should be a certain distance between the two bathrooms and a kitchen. If two bathrooms and a kitchen are concentrated in one area of the house, this is a terrible design! The three outlets share a water heater, and the three outlets are still a certain distance, in this case, no matter what kind of water heater is chosen, it will cause inconvenience to use.

The most outstanding performance is that no matter how high-end the water heater is selected, it is basically impossible to achieve instant heating at the outlet end of the water heater, which is far away from the water heater. This is due to the long conveying distance! After the water is stopped, the long water pipeline will also cause a large amount of hot water to accumulate, and the hot water can only be slowly cooled in the pipe, resulting in a large amount of energy waste.

Moreover, in the process of decoration, whether it is an open pipe or a buried pipe, a longer conveying distance will not only increase the decoration workload, generate greater decoration costs, but also may cause unnecessary troubles for other decoration projects, such as interference with other pipelines, and unnecessary relocation or line changes must be carried out.

A more reasonable choice would be this. One way is to use electric kitchen treasure under the cabinet in the kitchen, and use electric water heaters in the two bathrooms.

In this way, it can ensure that each outlet end is next to the water heater, and the water can basically be heated immediately. The disadvantage is that the power consumption is relatively large, and there is no reasonable use of gas resources in the kitchen. Another way is to share a gas water heater between the kitchen and a bathroom.

The other bathroom has its own electric water heater. The main reason for this is that in most house designs, there is often a bathroom and a kitchen that are close to each other, and it is more reasonable for the two to share a water heater and will not produce a long conveying distance. Another toilet with a long distance uses an electric water heater alone to avoid a long conveying distance and achieve the purpose of heating the water when it comes out.

I don't think it's good to share a water heater with two bathrooms and a kitchen, because it puts a lot of pressure on the water heater, but the circuit is overloaded and causes a short circuit.

It is better to share a water heater, there is no need to install so many water heaters, one is enough.

Well, because this saves space, and also saves the installation cost of the water heater, and saves the cost of use.

If the distance between the loose pants and the water pressure is high, 10 liters is enough. In fact, the number of liters of water heater used is not particularly directly related to several bathrooms, mainly with the permanent population.

The relationship between quantity is relatively close.

Regarding the concept of liters of water heaters, gas water heaters are the most commonly used.

It is also different from storage type electric water heaters.

The first Chongzhi Jane mainly depends on how far the distance between the kitchen and the bathroom is.

The second is to look at the water pressure, if the distance is close to the water pressure, 10 liters is enough. If the water pressure is small, choose 8 liters. If the spacing is more than 5 meters, 12 liters should be used for large water pressure, and 8 liters should be selected for small water pressure.