The white wall at home is dirty, what can be done to restore the white wall as new immediately?

The new house has just been renovated, and the walls are soiled by the bear child, and he must be very angry. Let's teach you a few tricks to make the walls white in no time, hurry up and learn it!

Most homes will decorate the walls in white. Although it looks beautiful, it can also easily get stains. For example, if there are naughty children in the house, they will keep scribbling on the wall with a pen, or they will step on the mud footprints on the wall.

Instantly make the white wall into a big flower face, here are a few tricks to teach you, you can easily turn white and save money!

1. Footprints. <>

What if a naughty kid gets footprints on the wall? Don't worry, you can borrow an eraser to clean the wall at this time, but you need to be careful when cleaning with an eraser, not too hard.

2. Handwriting. <>

If a child accidentally paints a few paintings on the wall of the house, leaving a handwriting, then we can use toothpaste to remove it. Because toothpaste contains surfactants and inorganic powders, it quickly removes handwriting from walls.

3. Glue stains. <>

If you don't need to remove the hooks on the wall, then glue stains will be left on the wall, which is generally difficult to remove. We can use white vinegar for cleaning, use a rag dipped in white vinegar, and slowly wipe the wall with glue stains.

4. Crayon stains.

Small children often draw with crayons on the wall, which we can use a hair dryer to remove. Because the crayons are mainly wax, they will become soft after preheating, so you can use a hair dryer to blow the heat, and then wipe it with a rag, isn't it amazing?

5. Mildew. <>

If the walls of the home are damp for a long time, there will be a lot of small mold spots. We only need to use a rag dipped in bleach to wipe off small mildew spots, and pay attention to keeping the wall dry in the later stage, so that there will be no mildew spots.

Generally, the walls of the home are white, but the white walls are easily dirty, and in addition to the perennial dust, they will also be scribbled by mischievous children, so that the white walls will become very ugly. For this reason, many families have put wallpaper on their homes, but the material cost of wallpaper is much more expensive, and some families do not have enough budgets and do not allow such willfulness.

You can use sandpaper to polish the particularly dirty place, and then go to the building materials store to buy a bucket of white latex paint roller coating, if there is no furniture at home, you can also choose to spray, the latex paint will dry and turn white naturally.

As long as you add some white vinegar to the dish soap, the white vinegar has a very powerful effect on the yellowed wall.

You can use white vinegar with toothpaste. Apply to swollen areas on the wall. Bleach can also be used. Paint it on the wall and wait for the wall to dry.

1. First clean up the dirty and uneven places on the original wall, then scrape the wall with a spatula, and carefully polish it with sandpaper after the wall is completely dry. 2. Next, you can paint. 3. If the damage to the wall is not serious, only a little stain, you don't need to repaint, just apply the toothpaste to the dirty place, gently brush it a few times with a toothbrush, and wipe it clean with a cloth.

1. When choosing a roller brush, you should choose the best one to prevent the brush from being uneven.

2. When we paint the wall, we should use a vertical brushing method.

3. Remember to wait for the first brush to dry before applying the second coat of painting.

4. It is also very important for us to choose the time to paint the wall, try to avoid the rainy season, and it is easy to get moldy when painting the wall on rainy days.

5. After the construction is over, remember that the tools should be cleaned with water in time, otherwise it will be difficult to clean up after the latex paint dries.

6. The remaining latex paint is recommended to be placed in a cool and dry place to avoid direct sunlight for a long time.

7. The eraser can also be gently wiped on the wall, and the strength can also be small to protect the wall from damage.

8. If the wall is moldy, directly mix it with bleach and water and then clean the moldy wall, and then use a brush to brush the primer first, and then brush with anti-mildew paint. This will keep the walls cleaner and prevent mold.

1. Moldy spots on the wall

, 184 disinfectant

When the air is humid, lime walls are prone to mold stains. At this time, a few dollars of 84 disinfectant can be done. Disinfectant and water are treated as per 1:

10 ratio mix (it is best to wear rubber gloves when operating to avoid injury**.) ), soak a piece of mop with the mixture and wring it into a semi-dry finish. Attach the mop to a mop that can be rotated.

Gently drag along the wall from top to bottom, and you will find that the mold stains where the mop passes are completely gone.

, alcohol

Mold on tile walls can be cleaned with alcohol at a concentration of 80. Spray alcohol on a rag and wipe down the walls. If you want to avoid the recurrence of mold stains, remember to dry the walls and apply a layer of wax to the cracks of the tiles after removing the mold stains, so that they will not grow mildew for two months.

Second, the handwriting on the wall

, pencil print

If it's a pencil print and a footprint, eraser sassafras will do the trick. Wipe from one end of the blot to the other, and during the wiping process, the eraser will become dirty on its own, and you will need to use a knife to remove the stain and then wipe it again.

, color pen print

Colored pens and graffiti erasers can't be erased, but white vinegar can easily deal with them. Moisten a paper towel with white vinegar and apply the paper towel to the graffiti. 3 After 5 minutes, tear off the tissue, the handwriting is transferred to the tissue, and the wall becomes white as new!

, ballpoint pen and ink mark

Alcohol is required to clean ballpoint pen and ink handwriting. Pour a little alcohol over the cloth and wipe the stain until it disappears.

3. Oil stains on the walls

, baking soda

Prepare a container, pour in baking soda, add water and stir well. Wipe the walls with a rag dipped in soda, and the oil will disappear quickly.

, paper towels, and detergent

If the tile is stained with oil, you only need to cover the oily area with a paper towel and spray the detergent evenly. After 15 minutes, the paper towel was lifted and the oil stain was softened, and the cleaning effect was very good.

Fourth, the best way to make your white walls clean as new

First of all, we prepare a container, and then squeeze an appropriate amount of toothpaste into it, about three centimeters. Then add an appropriate amount of white vinegar, and finally we add a little white wine. Stir it well with chopsticks and stir until dissolved.

We prepare the prepared solution and use a rag to dip some of the solution to wipe the white walls of the house. After wiping, our walls will become very clean, because the alcohol we add has a good sterilization effect. Add white vinegar to soften dirt.

Finally, add toothpaste, which has the effect of a friction agent, which can effectively remove dirt and have a whitening effect.

We just need to put our toilet paper on it, and then spray our solution to soak the toilet paper, and then let them sit for two to three minutes, okay, now the time is up, we take off the toilet paper, you can see that a lot of dirt has come down, if it hasn't come down yet, we can wipe it with clean toilet paper, or a rag, you can see that the wall is already very clean.

Clean the moldy wall with bleach, then brush the primer and add anti-mildew wall paint, and wipe the wall dry as soon as possible to avoid liquid flowing to other parts of the wall; When repairing, you can directly wipe the dirty area, and then brush the primer and then brush the anti-mildew wall paint, or you can directly use a cloth dipped in bleach to gently wipe it.

The best thing to do is to take a piece of 2000 mesh sandpaper and sand the dirty area, so that it will be clean.

For some small wall marks or footprints, we can use an eraser to remove them. However, when cleaning, you need to pay attention to the strength of the eraser to control it well, and not to use too much force, otherwise it will wipe the wall. It is not suitable if the wall is dirty or the footprints are severe.

The first point is that if the white wall is dirty, it should be cleaned, and you can use the white thing to paint the wall, and the second point is that if you want to repair it, you should find a professional idea to repair it well.

For the dirt of the children's graffiti, wipe it with an eraser; For stains caused by vegetable juices and meal juices, wipe them with a towel dipped in kitchen cleaner; For large areas of dirt, sandpaper is sanded, and after the sanding is completed, the surface is painted with latex paint.

1. If the interior decoration only scrapes the putty and does not paint the latex paint, the water absorption of the putty will penetrate the dirt into the base layer of the paper wall, that is, it will penetrate the entire putty layer.

2. Latex paint is film-forming, has a certain waterproof ability, when the dirt is smeared on the latex paint, only need to wipe it in time, whether it is dipped in cleaning liquid or wiped with a moist rag, it can be easily removed, it should be noted that when removing the dirt on the surface of the latex paint, do not use running water, be sure to use a damp rag.

3. If the tile wall is dirty, you can spray the wall with the cleaner in the kitchen. Wait for 5 to 10 minutes and then rinse with running water, and for dirt that is difficult to remove, you can also use a blade to gently scrape.

4. Baking soda, lemon, toothpaste and cleansing detergent all have strong decontamination ability, which can remove stains in different areas.

(1) Cleaning and cleaning of paint walls.

Paint wall is the most primitive and common wall decoration in indoor wall decoration, at the same time, due to the wide variety of coatings (lacquer), with different properties, different methods should be used when cleaning and cleaning.

1) Cleaning and cleaning procedures for paint walls that do not have water resistance Use a duster to remove dust and cobwebs from the wall, and pay special attention to the treatment of edges and corners.

Use a dry towel to wipe the stains on the wall, if you can't wipe it off, you can try erasers and fine sandpaper to gently wipe off, pay attention to mastering the skills, otherwise it will leave a scratch.

If the wall is stained with thick dirt such as mud and phlegm, you can try to gently shovel it off with a shovel.

Clean floors that have been contaminated by cleaning the walls.

2) Cleaning and cleaning procedures for paint walls with a certain degree of water resistance.

Use a duster to remove dust and cobwebs from the wall, paying special attention to the treatment of edges and corners.

Soak the towel in a basin of detergent (neutral), wring it out with medium pressure and wiping it back and forth along the wall from top to bottom.

Where there are still stains, scrub them with a short-handled brush.

For thick, raised dirt, try gently shoveling it off with a spatula.

Soak another towel in clean water, wring it out with medium pressure and wipe the wall thoroughly.

Clean floors that have been contaminated by cleaning the walls.

As long as it is latex paint, it is recommended that users do not wipe it with water. There are two main causes of dirty white walls: handprints or object marks on the wall; The south wind is damp and accumulates excessive dust.

Method 2: Polishing the surface with fine sandpaper, and then use a dry cloth to remove the surface dust, remember not to get wet.

Method 3: Gently grind the old wall with 240 particles of sandpaper to remove pen marks or stains, and then wipe the wall clean. Or directly brush a surface coat, and then use Xuanhejun glaze stain-resistant paint, brush or barrel on the old wall first, half an hour after the first coating is dry, and then brush again, the surface anti-fouling layer has been done.

Material: Xuanhe Jun glaze stain-resistant treasure bucket.

Tools: a brush or barrel.

Effectiveness: pens, gel pens, pencils, inks can be scrubbed without marks.

Quality inspection: inorganic mineral coating, 0 formaldehyde without glue, environmental protection and health.

After the wall painting is completed, if there are pen marks and stains written on it the next day, you can wipe it with water, and you don't have to worry about wall pollution.

First we prepare a container, then add an appropriate amount of toothpaste to it, then add an appropriate amount of vinegar, preferably we add a little more liquor, stir well with chopsticks, white vinegar can soften the dirt, pour the solution into the watering can, then the toilet paper is placed on it, and when the time is up, we will take off the toilet paper.

Some areas where the paint is dirty can be cleaned, if not, just repaint it.

If the white wall is dirty, you can paint it with a layer of white or paint.

1. Put some white vinegar alcohol (liquor) and toothpaste in the flour, mix evenly, and wipe the wall with a sponge dipped in a blender. 2. You can prepare a bottle of 84 disinfectant, because its main ingredient is sodium hypochlorite, which has an oxidizing effect, so it can also oxidize and dissolve stains. 3. You can apply some white toothpaste on the big white wall, and you can remove the stains by wiping, and you can also clean the yellowed wall.

4. You can prepare some white vinegar, then add an appropriate amount of dish soap, pour in 100ml of water, stir well, and use a rag to dip this solution to wipe the wall.

1. After the big white wall is used for a period of time, there will be some stains left on it, after all, the dirt resistance of the big white wall is very poor, so after the big white wall is dirty, you can choose to repaint the wall, and when repainting the wall, it is best to choose latex paint or wall decoration materials such as wall cloth with high dirt resistance, after all, the service life of such a decoration method will be relatively long.

2. You can repaint it. If the large white wall is used for a long time, there may be yellowing, so it will look brighter when repainted.

3. If we don't want to start a big project, we can choose to spray some white vinegar and baking soda on the big white wall, and then use a rag to wipe it, but this treatment method can only be relative to a small area of house stains.